2. WURM
  3. ZCB-ADP/MGR-BUS

WURM ZCB-ADP/MGR-BUS Product information

  • I have reviewed the product information for the Wurm ZCB-ADP/MGR-BUS CAN bus adapter. The document outlines the features of the device, including its front and back sockets and plug options, its installation in the installation frame MGR131/141 and in an installation cutout, as well as its connection diagram, technical data and key functions. I am ready to answer any questions you have regarding this device.
  • What is the intended use of the ZCB-ADP/MGR BUS?
    What are the connection options on the front side?
    What are the connection options on the back side?
ZCB-ADP/MGR-BUS
Product information
ZCB-ADP_MGR-BUS_PI_2013-03_EN Subject to technical changes Page 1 of 4
Front view
CAN bus adapter for installation in the MGR or directly in the installation cutout
Features
CAN bus adapter for external access to the CAN bus
Front side: 2 x RJ45 sockets
Back side: 2 x RJ45 sockets, 1 x 4 pin plug
ZCB-ADP/MGR-BUS
Product information
Page 2 of 4 Subject to technical changes ZCB-ADP_MGR-BUS_PI_2013-03_EN
Writing conventions
Symbol
Meaning
CAUTION!
Avoid the described hazard: otherwise minor or medium physical injury or
damage to property will result.
WARNING!
Avoid the described hazard: otherwise there is danger from electric
voltage that could lead to death or serious physical injury.
For your safety
For safe operation and to avoid personal injury and equipment damage through operator error, always
read these instructions, become familiar with the device, and follow all safety instructions on the
product and in this document, as well as the safety guidelines of Wurm GmbH & Co. KG Elektronische
Systeme. Keep these instructions ready to hand for quick reference and pass them on with the device
if the product is sold.
Wurm GmbH & Co. KG Elektronische Systeme accepts no liability in case of improper use or use for
other than the intended purpose.
Target group
These instructions are intended for "service technicians".
Intended use
The ZCB-ADP/MGR BUS is a CAN bus adapter which allows external
access to the CAN bus.
Validity of the documentation
Date
Functional upgrade
Page
2013-03
Basis of documentation
Any software versions not listed are special solutions for individual projects and are not described in detail in this document.
This document automatically ceases to be valid if a new technical description is issued. Manufacturer: Wurm GmbH & Co. KG
Elektronische Systeme. You can find more information on our website at www.wurm.de
ZCB-ADP/MGR-BUS
Product information
ZCB-ADP_MGR-BUS_PI_2013-03_EN Subject to technical changes Page 3 of 4
Installing
Installation in the installation frame MGR131/141
Push the device into the installation frame up to the end stop until it engages between the spring clips.
Note!
Please read the product information for the MGRxxx installation frame.
Installation cutout for the ZCB-ADP/MGR BUS
Mounting in the installation cutout
Push the device into the installation cutout up to the end stop until it engages between the retaining
tabs of the CAN bus adapter.
Connection diagram
Back side
Note!
All connections are interconnected.
ZCB-ADP/MGR-BUS
Product information
Page 4 of 4 Subject to technical changes ZCB-ADP_MGR-BUS_PI_2013-03_EN
4 pin plug (back side)
Connection No. Function
71 CAN GND
72 CAN low
73 Shield
74 CAN high
Technical data
Connections
2 x RJ45 CAN bus socket
Back side:
2 x RJ45 CAN bus socket
Dimensions
Fastening
Ambient temperature
Adapter weight
Weight incl. VP
/