User Manual for In-Ear Mono Bluetooth 4.1 Headset T9
Specifications
- Bluetooth: v4.1
- Bluetooth range: up to 10m
- Battery: 80mAh
- Charging time: about 1,5 hours
- Standby time: about 300 hours
- Working time: up to 8 hours
Pairing the headset with your device
There are two methods for pairing this Bluetooth headset with your device:
1. The first method is when the headset is powered down. You have to
long-press the multifunction button until the red and blue light start flashing
alternately. The flashing means that the headset’s Bluetooth is on and ready
to pair.
2. The second method is when the headset is in sleep mode. Press the
multifunction button, and blue light will start flashing. That means that the
headset is ready to pair.
When you turn on Bluetooth on the headset, pair it with your device. The default
pairing code is “0000”.
Controlling calls
- To answer a call simply short-press the multifunction button.
- If you want to reject a call, press multifunction, Volume up and Volume down
buttons at the same time. Release the buttons to reject the call when you hear
beep sound or voice prompt.
- During a call, short-press the multifunction button to hang up. For increasing
or decreasing volume during a call, press Volume Up or Volume Down
buttons.
- Short-press the multifunction button twice to redial the last number.