Bircher Reglomat PrimeMotion B Original Instructions
- Type
- Original Instructions
Bircher Reglomat PrimeMotion B is a microwave motion detector for opening automatically controlled doors. It has a wide range of applications and can be used in various settings, including:
- Automatic door opening in retail stores, hospitals, and other public buildings
- Access control in offices, warehouses, and other restricted areas
- Safety applications, such as preventing doors from closing on people or objects
The PrimeMotion B motion detector is easy to install and can be mounted on the wall or ceiling. It has a range of up to 4 meters and can detect motion in both directions. The detector also has a number of adjustable settings, including:
Bircher Reglomat PrimeMotion B is a microwave motion detector for opening automatically controlled doors. It has a wide range of applications and can be used in various settings, including:
- Automatic door opening in retail stores, hospitals, and other public buildings
- Access control in offices, warehouses, and other restricted areas
- Safety applications, such as preventing doors from closing on people or objects
The PrimeMotion B motion detector is easy to install and can be mounted on the wall or ceiling. It has a range of up to 4 meters and can detect motion in both directions. The detector also has a number of adjustable settings, including:
1
PrimeMotion B
Observe the national and international regulations on door safety.
Only trained, qualified personnel may mount and start up the detector.
The unit may only be opened and repaired by Bircher Reglomat.
The unit may only be operated from a safety extra-low voltage (SELV) system with safe electrical separation.
Always consider the safety functions of your application as a whole, never just in relation to one individual section of the system.
The installer is responsible for carrying out a risk assessment and installing the detector and the door system correctly.
Avoid touching any electronic components.
The door drive and transom profile must be earthed correctly.
Start-up
2Montage
Translation of the original instructions
Recommendedstart-upsequence:I.MountingII.Connection
Mounting
I
General
Safety instructions
1
Pleasekeepforfurtheruse!
Quality
international
level
EN ISO
9001
Hood, Light window de-
tector indication, no function,
Cable bushing,
Mounting holes,
Detector electronic,
Microwave module,
LED microw.: green
PrimeMotion B
1. Remove cover hood 2. Lay and connect cable 3. Mount detector
Radarfeld
Microwave motion detector for opening
automatically controlled doors
1. Position drill template
2. Drill the holes, remove drill template
3. Lay cable and mount detector
Year of construction 2010
ENGLISH
Mounting of the detector
II
Electrical connections
Connecting
3
PrimeMotion B ES Controller
1 brown
2 white
3 green
4 yellow
Cable
brown
white
green
yellow
Power Supply 3 m
Relay
–
+
11.5 - 36 VDC
12 - 28 VAC
Microwave
1
2
3
4
4 3 2 1
+
Mechanical fine tuning
4
––
++
Manual settings of the
inclination
0° ... +45° in 5° steps
Manual settings of the
pivoting
– 20° ... +20° in 5° steps
––
++
1m
2m
0m
0m
1m
2m
3m
4m
Wide radar field turn 90° Narrow radar field
min. = 0.16 x 0.8, max. = 2 x 4 m (WxD)
min. = 0.5 x 0.25, max. = 4 x 2 m (WxD)
+
1m
2m
0m
0m
1m
2m
3m
4m
––
Inclination angle: 35° Inclination angle: 35°
2.2 m
2.2 m
–
90°
5ConfigurationbyhandDIP-Switchandpotentiometer
Radar functions DESCRIPTION
Field size
1 = Smallest radar field (LED flashes once),
2 ......., 3* = Medium radar field (flashes 3 times),
4 ......, 5 = Largest radar field size (flashes 5 times)
Direction recognition
1
ON
234
ON = both directions
OFF* = forward
Cross Traffic Optimisation CTO
1
ON
234
ON = CTO on
OFF* = off
Door filter (Interfence for radar)
1
ON
234
ON = Door and interference filter on (EMV flows, e.g. fluorescence tube)
OFF* = filter off
Radar exit
1
ON
24
3
ON = passive (NC)
OFF* = active (NO)
2
1
ON
234
Radar exit (active/passive, NO/NC)
Interference filter (Door and EMV flows)
CTO and swing filter
Direction recognition
green LED Fault Remedy
continuously
lit
Radar tripping when door is closing 1. Set angle of radar further away from the door.
2. Adjust radar field size.
Radar false tripping without
apparent external influence
1. Avoid light sources (e.g. fluorescent tubes) in the immediate vicinity of the detector.
2. No moving objects (plants, advertising posters, etc.) in the vicinity of the detector.
3. Avoid strong vibration at the radar detector
4. Possible influence from a second radar detector in the vicinity (very unlikely)
Identification of the year of manufacture
8.2
Smallest radar field Largest radar field
medium radar field
Potentiometer
DIP-Switch
Year of ma-
nufacturing
Week
PrimeMotion B ES
Remedying malfunctions
6
Most important technical data
7
Technology Double field module, 24.125 GHz
Mounting height 1.8 - 4 m
Electrical power supply ≤120 mA @ 11.5 – 32 VDC, 12 – 28 VAC
Power consumption < 4 watts
Making current ≤800 mA
Output radar max. contact voltage: 110 VDC/125 AC,
max. switching current: 1 A, max switching capacity: 37.5 VA (AC) / 30 W (DC)
Protection class Suitable for use acc. to IP54
EMV / RTTE acc. to EMC and RTTE directives
Operating temperature -20° to 60° C
Dimensions 172 x 60 x 48 mm (LxWxD)
Weight 120 g
Declaration of conformity, identification of the year of manufacture by means of the serial number
8
9Contact data
Manufacturer:
Bircher Reglomat AG
Wiesengasse 20
CH-8222 Beringen
Switzerland
www.bircher-reglomat.com
Declaration of conformity
8.1
Manufacturer: Bircher Reglomat AG, Wiesengasse 20, CH-8222 Beringen, Switzerland, www.bircher-reglomat.com
Authorised rep: Bircher Reglomat GmbH, Robert Bosch Strasse 3, D-71088 Holzgerlingen, Germany
Following directives have been observed: 2006/42/EC, R&TTE directive 1999/5/EC, EMV-directive 004/108/EC
Following standards have been taken into acc.:
EN 61000-6-1,
EN 61000-6-2, EN 61000-6-3, EN 61000-6-4
Signee: CEO, L. Oberholzer / QHSE, K. Kuhn / 1.12.2010, CH-8222 Beringen
Product variant: PrimeMotion B ES
289118D 09/11*factorysettings
-
1
-
2
Bircher Reglomat PrimeMotion B Original Instructions
- Type
- Original Instructions
Bircher Reglomat PrimeMotion B is a microwave motion detector for opening automatically controlled doors. It has a wide range of applications and can be used in various settings, including:
- Automatic door opening in retail stores, hospitals, and other public buildings
- Access control in offices, warehouses, and other restricted areas
- Safety applications, such as preventing doors from closing on people or objects
The PrimeMotion B motion detector is easy to install and can be mounted on the wall or ceiling. It has a range of up to 4 meters and can detect motion in both directions. The detector also has a number of adjustable settings, including:
Ask a question and I''ll find the answer in the document
Finding information in a document is now easier with AI
Related papers
Other documents
-
DRIVEN 20D24T01 User guide
-
BBC Bircher InTra6 Cat. 2 User manual
-
Bircher PrimeTec B User guide
-
-
Marantec Control 40 Owner's manual
-
-
-
-
-
