2. ROOMS TO GO
  3. 26679730

ROOMS TO GO 26679730 Assembly Instructions

  • Hello! I've reviewed the assembly instructions for the 79732 Desk. This document contains a list of all required parts and tools, as well as step-by-step instructions with illustrations for assembling the desk. Additionally, there are guidelines for the proper care and maintenance of your new furniture. I'm ready to assist with any questions you have about this product!
  • What should I do before assembly?
    How should I position the desk for assembly?
    What should I do with the packing materials?
    What tool do I need to tighten the bolts?
ASSEMBLY INSTRUCTIONS
⑮min
Washer Spring washer
ø 0.31’’ (6 pcs) ø 0.31’’ (6 pcs)
Extra = 1 pc Extra = 1 pc
Instructions to Assembly
1 Carefully remove all parts from the carton. Lay them out on a clean soft surface.
(Do not discard any packing materials until the product is fully assembled, to prevent
any small parts from being accidently discarded. )
2 Lay the Desk upside down on a clean soft surface or fabric . (Pic.1)
3 Take each leg set and match it with the corresponding letter.
Align the set's screw holes with the desk's screw holes. (Pic.2)
4 Place spring washer & flat washer before inserting the bolt into the holes.
Screw and tighten each bolt by provided Allen key. (Pic.3)
5 After securing the legs set, carefully turn the desk upright onto its legs
Pic. 1 Pic.2 Pic.3
Pic.4 Pic.5
Usage Instructions:
▪ Clean your furniture regularly with dry cloth and any good quality furniture wax.
▪ Use trays or coasters to prevent heat marks from occurring on the furniture .
▪ Avoid keeping your furniture next to windows and other places directly exposed to sunlight to prevent its color fading.
▪ Wipe off any excess water or spilled liquid immediately to prevent water marks.
Extra = 1 pc
Components and Hardware List for SKU No. 79732
0.2’’ (1 pc)
Desk (1 pc)
Legs (2 sets )
Bolt
ø 0.3 * 2'' (6 pcs)
Allen key
/