Sunnydaze Decor HBM-611 User guide

Type
User guide
NARBONNE DECORATIVE BORDER FENCE
HBM-611
Read this manual carefully before use and save it for future reference.
Page 1 / 1
Any modication to the product or failure to follow recommended care will void the product warranty.
Identify the ush side and spacer
on each fence panel.
Insert the rst fence panel into
the ground by carefully pushing
the legs into the soil.
Link the second panel to the rst
by inserting the leg on the ush
side through the spacer on the
rst panel.
Repeat steps until all panels have
been installed.
Thank you for choosing Sunnydaze Decor. We stand behind our brand and the quality of the items we sell.
Replacement parts or products will be sent at our discretion within the 1-year warranty period. Proof of purchase, with
the date of purchase as well as photos of the merchandise defect, must be provided. Photos are used to determine
the cause of defects and for future quality control. Register your warranty at https://tiny.cc/SunnydazeWarranty
If you have any questions, comments or concerns, feel free to contact us by phone at 833-982-1977, by email:
customerservice@sunnydazedecor.com, or via our contact us page at https://tiny.cc/SunnydazeContact
Purchase Date: / / Order/Customer Reference Number:
11/2020060023
Installation
General Use & Care
INSTALLATION: Install into rm soil, installing into loose soil may cause the fence panels to lean or tip over.
Do not install fencing into rocks or sand as it may damage the finish.
CLEANING: Use a slightly damp, soft cloth to wipe away dirt and debris.
WINTER CARE & STORAGE: Store this item during winter, especially in locations with ice and snow. Move fencing
to an indoor location that is dry. Covering with a breathable cover while in storage will help prevent dust build-up.
Troubleshooting
THE FENCE POST DON'T INSERT FAR ENOUGH INTO THE GROUND
Make sure there are no obstacles within the soil such as rocks, tree roots, or pavement.
The soil may be too dry. Soak the soil with water and try inserting the panels again.
HELPFUL HINT
If fence panels are installed near grass that requires mowing, consider leaving more of the fence panel legs
exposed above the ground. This will allow for easier mowing and trimming. Avoid using powered weed trimmers
near the panels as doing so may chip the powder coating or permanently damage the panel.
Spacer
  • Page 1 1

Sunnydaze Decor HBM-611 User guide

Type
User guide

Ask a question and I''ll find the answer in the document

Finding information in a document is now easier with AI