Stratco Slot-N-Lock Galvanised 5 Shelf Unit 1800 x 900 x 400mm Installation guide

  • Hello, I'm your chat assistant. I've reviewed the Stratco Saver 5 Shelf Slot-N-Lock Installation Guide, which also includes assembly information for corner and work benches. This guide provides detailed steps for safely assembling and configuring your shelving system, focusing on proper load distribution and safety. I'm ready to help answer any questions you might have about the installation process or device specifications.
  • What is the maximum load per shelf?
    What kind of surface is required for installation?
    What should I do if I want to store heavy items?
1x Corner Bench A1x Work Bench B1x 5 Shelf Unit C
OR OR
1.1 1.2
123
4 5
C
OR
A B
INSTALLATION
GUIDE
Incorrect assembly, positioning or loading of shelving units may result in injury from falling items.
• Please carefully read and follow the assembly instructions.
• Stand shelving unit on flat and level concrete surface.
• If heavy items are to be stored, the shelving unit MUST be fixed to a wall with appropriate fasteners.
• The heaviest items should be placed on the bottom shelves and spaced evenly, to distribute the load.
• Tabs on shelf rail must engage legs correctly (refer figure 1.2).
Maximum load 30kg per shelf, must be evenly distributed.
Stratco Saver
5 Shelf Slot-N-Lock
SHELVING SYSTEM
IMPORTANT SAFETY WARNING
INSTALLATION PROCESS
B
A
C
1
3
4
2
© Copyright JANUARY 2019 25/01/19
All brands and logos/images accompanied by ® or ™ are
trade marks of Stratco (Australia) Pty Limited.
www.stratco.com.au
650
CONTACT
1300 165 165
/