2. Stratco
  3. Work Bench

Stratco Work Bench Installation guide

  • I have read the provided Installation Guide for Rivet Lock Shelving Kit. This document details the assembly process and lists components like the steel pegboard, shelf rails and legs . I'm ready to answer any questions you have about the assembly or features of this shelving kit.
  • What tool is required for assembly?
    How high can the lower shelf be?
    What components are included in the kit?
Rivet Lock Shelving Kit
PEGBOARD ASSEMBLY
INSTALLATION
GUIDE
2
COMPONENTS
TOOL REQUIRED
x1 x2 x4 x4 x1
x4
TIMBER SHELF
LEG-1512mm
SHELF RAIL LONG
SHELF RAIL SHORT
STEEL PEG BOARD
SHELVING FEET CAP
1x RUBBER MALLET
x1
WORKBENCH TOP
x2
LEG-900mm
3
ASSEMBLY
1
2
3
4
L E G -1512m m
LEG-900mm
Ground level
Lower shelf
CAN'T BE MORE
THAN 300mm
NOTE:
The lower shelf cannot be more than 300mm above ground level due to stability.
4
1
2
3
4
5
6
7
www.stratco.com.au
© Copyright May 2021 20/05/21
All brands and logos/images accompanied by ® or ™ are
trade marks of Stratco (Australia) Pty Limited.
CONTAC T
1300 165 165
BROCRS-PB
NOTES
/