2. Stratco
  3. Handi-Pod Corner Shelf

Stratco Handi-Pod Corner Shelf Installation guide

  • Hello! I've reviewed the user guide for the Handi-Pod Garden Shed Corner Shelf Kit. This document details how to install the corner shelf within your garden shed using a drill and PH2 bit. I can help you with any questions you may have regarding the installation process or the product itself.
  • What tools are required for installation?
    How many sheetmetal screws are included in the kit?
    Can the shelf be installed at any height?
HANDI-POD® GARDEN SHED CORNER SHELF KIT INSTALLATION GUIDE
HANDI-POD® GARDEN SHED
CORNER SHELF KIT
• Cordless Drill • PH2 Phillips-head Bit
TOOLS REQUIRED
COMPONENTS
Sheetmetal
Screw
x6
Corner Shelf
x1
Sheetmetal Screw
Do not remove
FIGURE 1.0
INSTALLATION
Handi-Pod® Garden Shed Corner Shelf Kits can be installed
to any corner and at any Panel Lap.
Determine the corner location and height to install the Shelf.
FIGURE 1.1
Remove the six existing Sheetmetal Screws from corners and
Panel laps.
Note: shed is shown in partially
assembled state for illustrative
purposes only. Fully assemble
Shed before installing.
Sheetmetal Screw
Shelf
Panel Lap
BROCHPGSCSK
« SCAN THIS QR CODE TO FIND A STRATCO NEAR YOU
1300 155 155
stratco.com.au
All brands and logos/images accompanied by ® or ™ are trade marks of Stratco (Australia) Pty Limited. ® Copyright Jan 2023
FIGURE 1.3
Re-install the Sheetmetal Screws that were removed in
Figure 1.1.
FIGURE 1.2
Fit the Corner Shelf to the Panels. The Corner Shelf slots
onto the Panel Lap from the front.
/