2. Industrial & lab equipment
  3. Personal safety & protection
  4. Fire protection
  5. Mircom
  6. LT-667 RM-1001

Mircom LT-667 RM-1001 Operating instructions

  • Hello! I am an AI chatbot trained to assist you with the Mircom LT-667 RM-1001 Operating instructions. I’ve already reviewed the document and can help you find the information you need or explain it in simple terms. Just ask your questions, and providing more details will help me assist you more effectively!
LT-667 Rev.3
Installation
The RM-1001 Fire Alarm Signal Zone relay module provides relay contact of common, normally open and normally closed. This module comes
mounted to a metal single gang plate and must be mounted into a single gang electrical box.
Wiring
The relay module contains three terminals for Common, Normally Closed contact and Normally Open contact.
It is rated at 28VDC, 1 Amp. Refer to the wiring diagram below for correct installation.
RM-1001 FIRE ALARM SIGNAL ZONE RELAY MODULE
INSTALLATION AND OPERATING INSTRUCTIONS
LT-667 Rev.3
Installation
The RM-1001 Fire Alarm Signal Zone relay module provides relay contact of common, normally open and normally closed. This module comes
mounted to a metal single gang plate and must be mounted into a single gang electrical box.
Wiring
The relay module contains three terminals for Common, Normally Closed contact and Normally Open contact.
It is rated at 28VDC, 1 Amp. Refer to the wiring diagram below for correct installation.
RM-1001 FIRE ALARM SIGNAL ZONE RELAY MODULE
INSTALLATION AND OPERATING INSTRUCTIONS
LT-667 Rev.3
Installation
The RM-1001 Fire Alarm Signal Zone relay module provides relay contact of common, normally open and normally closed. This module comes
mounted to a metal single gang plate and must be mounted into a single gang electrical box.
Wiring
The relay module contains three terminals for Common, Normally Closed contact and Normally Open contact.
It is rated at 28VDC, 1 Amp. Refer to the wiring diagram below for correct installation.
RM-1001 FIRE ALARM SIGNAL ZONE RELAY MODULE
INSTALLATION AND OPERATING INSTRUCTIONS
LT-667 Rev.3
Installation
The RM-1001 Fire Alarm Signal Zone relay module provides relay contact of common, normally open and normally closed. This module comes
mounted to a metal single gang plate and must be mounted into a single gang electrical box.
Wiring
The relay module contains three terminals for Common, Normally Closed contact and Normally Open contact.
It is rated at 28VDC, 1 Amp. Refer to the wiring diagram below for correct installation.
RM-1001 FIRE ALARM SIGNAL ZONE RELAY MODULE
INSTALLATION AND OPERATING INSTRUCTIONS
/