GHOUSE HFWF191900AAP Operating instructions

Type
Operating instructions

This manual is also suitable for

1
ASSEMBLY INSTRUCTIONS
WF295130
FULL DAYBED
2
Detail View
Part List
A
3
C
B
Frame HB/FB - 2pcs Side panel - 2pcs Horizontal bar - 2pcs
D E F
GH J
K L M
N
Side rail - 2pcs
Leg (Left Front ) - 1pc Leg (Right Front ) - 1pc Leg (Left Back ) - 1pc
Leg (Right Back ) - 1pc Long guard rail - 1pc
Slats - 4pcs Slats - 6pcs Lower support slat - 1pc
Leg support -3pcs
Hardware List
1 2
Hex-Head bolts (12pcs)

3
Hex-Head bolts (12pcs)

5
Horizontal-Hole bolts(24pcs)
1/4"*15 (9.5mm)
Allen key (1pc)
(1/4")4.5*58mm Wood screws (24pcs)

ASSEMBLY TOOLS REQUIRED ( NOT INCLUDED )
4
4
5
3
Note:Part 3 will face up with the "x" mark on it,
otherwise it cannot be tightened
STEP 1:
STEP 2:
3
12PCS
1 3
12PCS
3
3
3
1
2pcs
6
STEP 3:
STEP 4:
12PCS
2 3
12PCS
3
2
3
3
2
M
M
M
N
N
N
N
Attach leg support (N) to lower support slat (M), then rotate to
secure. Move support slat inside Full bed.
7
STEP 5: 5
24PCS
M
5
5
69mm
2.7"
138mm
5.4"
138mm
5.4"
Note: Do not lock the screws of the bed slats to the outermost edge of the bed slats, you
need to leave a certain space at the edges, otherwise it will cause the board to break.
Do not lock the bed slats on the edge of the wood, please hold firmly before screwing ,

  • Page 1 1
  • Page 2 2
  • Page 3 3
  • Page 4 4
  • Page 5 5
  • Page 6 6
  • Page 7 7

GHOUSE HFWF191900AAP Operating instructions

Type
Operating instructions
This manual is also suitable for

Ask a question and I''ll find the answer in the document

Finding information in a document is now easier with AI