TWIN/FULL BUNKBED WITH DESK
1
ASSEMBLY INSTRUCTIONS
WF290950 \ WF290951
If you have any questions about the product,
please contact the email: [email protected]
2
SAFETY WARNING !!
1. This bed is designed for use only mattress (es) meeting the following specifications on the upper
bunk, and lower bunk:
Lower bunk
Bed type
Full Standard Length
74"-75" With
53 1/2" Thickness
8"
Upper bunk (Bunk bed and tribed included)
Bed type
Twin Standard Length
74"-75" With
38 1/2" Thickness
6"
2. Replacement parts, including additional guardrails, maybe obtained from any of our
(GIGACLOUD TECHNOLOGY (USA) INC.) dealers
3. Follow the information on the warnings appearing on the upper bunk bed end structure and on
the carton. Do not remove warning label from bed.
4. Always use the recommended size mattresses or mattress supports, or both, to help prevent the
likelihood of entrapment or falls.
5. Surface of mattress must be at least 5" (127mm) below the upper edge of guardrails.
6. Do not allow children under 6 years of age to use the upper bunk.
7. Periodically check and ensure that the guardrail, ladder, and other components are in their
proper position, free from damage, and that all connectors are tight.
8. Do not allow horseplay on or under the bed and prohibit jumping on the bed.
9. Always use the ladder for entering and leaving the upper bunk.
10. Do not use substitute part. Contact the manufacture or dealer for replacement part.
11. Use of a night light may provide added safety precaution for a child using the upper bunk.
12. Always use guardrails on both long sides of the upper bunk. If the bunk bed will be placed next
to the wall, the guardrail that runs the full length of the bed should be placed against the wall to
prevent entrapment between the bed and wall.
13. The use of water or sleep flotation mattresses is prohibited.
14. STRANGULATION HAZARD - Never attach or hang items to any part of the bunk bed that are
not designed for use with the bed; for example, but not limited to, hook, belts and jump ropes.
15. Keep these instruction for future reference.
18. Be certain all staples are out of the box before beginning assembly on the shipping carton.
16. Prohibit more than one person on upper bunk
17. We recommend assembling your bunk bed on the shipping carton to protect your floor or carpet.
Detail View
3
Part List
4
A
WF290950
B
Leg (Left Front / Right back ) - 2pcs Leg (Left back / Right Front ) - 2pcs Leg (Left Front / Right back ) - 2pcs
Leg (Left back / Right Front ) - 2pcs
C
D I
Side rail (Back & Front)-2pcs
J
Upper horizontal - 2pcs
K
Long guard rail - 4pcs Slats - 14pcs
N P
Q
Lower side rail (back)-1pc
Lower side rail (front)-1pc
Part List
5
Hardware List WF290951
E
Horizontal bar (HB/FB) - 6pcs Horizontal bar (HB/FB) - 4pcs
FG
Horizontal bar (HB/FB) - 2pcs
H
Side panel - 4pcs
L
Vertical guard rail - 4pcs Vertical guard rail - 2pcs
M
O
Slats - 7pcs
R
Support side rail - 2pcs
S
S1
Long ladder (left) - 1pc
Long ladder (right) - 1pc
T
Step ladder - 3pcs
U
U1 U2 V
XX1
YY1
W
Top panel - 1pc Leg (Left) - 1pc Leg (Right) - 1pc
Horizontal bar (back) - 1pcHorizontal bar (front)- 1pc
Z
Horizontal bar - 2pcs
Middle shelf - 2pcs
Top panel - 2pcs
Bottom panel - 2pcs Middle panel- 6pcs
Hardware List WF290951
1 2 3
456
Wood dowel (28pcs)
Horizontal-Hole bolts(60pcs)
1/4"*15 (9.5mm)
ASSEMBLY TOOLS REQUIRED ( NOT INCLUDED )
Wood screws (66pcs)
7
Hex-Head bolts (58pcs)
30mm
8 9
10 11 12
13
4*19mm
Wood screws (6pcs)
Hex-Head bolts (4pcs)
Allen key (1pc)
(1/4")4.5*58mm
40mm
Wood screws (6pcs)
6
Hex-Head bolts (56pcs)
Wood screws (20pcs)
81*26*21*(2.5mm)
Hooks (2pcs) 16*1mm
Flat washer (2pcs)
STEP 1:
7
STEP 2:
x 2
x 2
4
24PCS
4
4
4
444
4
4
4
4
4
4
STEP 3:
8
STEP 4:
16PCS
9
x 2
9999
9
9
9
9
3
12PCS
3 6
12PCS
12PCS
1
3
3
x 2
3
3
3
1
1
1
1
1
1
3
6
1
STEP 5:
9
STEP 6:
14PCS
3 6
14PCS
6PCS
1
x 2
3
3
3
3
1
1
1
3
6
1
3
6
x 2
12PCS
3 6
12PCS
6PCS
1
3
3
3
3
6
13
6
1
1
1
3
3
3
3
3
3
3
STEP 7:
10
STEP 8:
14PCS
4
7
12PCS3PCS
4
4
4444
44
4
4444
44
777
777
444
STEP 9:
11
STEP 10:
10PCS
4
7
12PCS3PCS
4
777
777
444
4444
4
4444
4
STEP 11:
12
STEP 12:
4PCS
3 6
4PCS
3
3
3
3
3
6
4PCS
3 6
4PCS
3
3
3
3
STEP 13:
13
STEP 14:
STEP 15:
3
3
2PCS
3 6
2PCS
1
1
6
2PCS
1
3
2PCS
2 6
2PCS
2
2
2
6
2
2
1
1
2PCS
2 6
2PCS
2PCS
1
2
16
STEP 16:
14
STEP 17:
4
4
2PCS
4
5
6PCS
5
55
5
5
5
4
5
STEP 18:
15
STEP 19:
3
3
3
3
3
3
6
6PCS6PCS
3
2PCS
11
4PCS
10
11
11
10
10
2PCS
4
2PCS
13
10 10
11
13
4
2PCS
12
12
STEP 20:
16
STEP 21:
10
9
7
42PCS
Note: Do not lock the screws of the bed slats to the outermost edge of the bed slats, you
need to leave a certain space at the edges, otherwise it will cause the board to break.
Do not lock the bed slats on the edge of the wood, please hold firmly before screwing ,
56.5mm
79mm
2PCS
10
4PCS
9
-
1
-
2
-
3
-
4
-
5
-
6
-
7
-
8
-
9
-
10
-
11
-
12
-
13
-
14
-
15
-
16
