Craft Main QDQ-3161Q Installation guide

Brand: Craft Main

Model: QDQ-3161Q

Type: Installation guide

www.craftandmain.com

assembly instructions I

•1

PRODUCT DESCRIPTION: Averyl Queen Size bed

Item # QDQ-3161Q

Customer Service Department.

8:30 a.m.– 5:00 p.m. EST, M-F

E-Mail: [email protected]

Toll Free: (800) 443-1410

Fax: (973) 428-8026

Assembly Instructions >>>

IMPORTANT

RETAIN FOR FUTURE REFERENCE

READ CAREFULLY

www.craftandmain.com

assembly instructions I

FOR YOUR SAFETY

Please read instructions carefully and thoroughly before assembling.

DO NOT use this product if it is damaged or broken.

Adult assembly is required.

Keep plastic bags and small parts away from children.

Safely discard all packing materials.

Check parts against the parts list to make sure you have all the parts needed for proper assembly.

Familiarize yourself with the inventory of parts and the accompanying illustrations to ensure safe and proper

assembly. If you are missing parts or have any questions please contact our Customer Service Department.

E-Mail: customerservice@foremostgroups.com

8:30 a.m.– 5:00 p.m. EST, M-F

Toll Free : : (800) 443-1410

Fax: (973) 428-8026

Failure to tighten bolts may cause injury. DO NOT force components and over tighten the nuts during assembly.

USE AND MAINTENANCE

Use on level surface only.

Please check assembly at regular intervals and frequently tighten

hardware if necessary.

CLEANING INSTRUCTIONS

Dust using a lint free cloth.

Clean the surface using damp cloth and mild dish washing liquid if necessary.

DO NOT use any cleaning product containing alcohol or ammonia.

These will dull the shiny surface of the product.

Furniture polish will also work to clean and dust off the surface.

We recommend that you test all cleaning materials on the underside of any

surface that would not be seen during normal use of product.

Congratulations on your purchase from Craft + Main

™

•2

www.craftandmain.com

assembly instructions I

•3

PARTS LIST

(A) HEADBOARD TOP

QTY: 1 PC

(D2) SIDE RAIL(WITH 2 BRACKETS)

QTY: 2PCS

(B) HEADBOARD BOTTOM

QTY: 1 PC

(E) SLAT

QTY: 3PCS

QTY: 1PC

(D1) SIDE RAIL(WITH 1 BRACKET)

QTY: 2PCS

(F) SUPPORT LEG

QTY: 6PCS

www.craftandmain.com

assembly instructions I

HARDWARE LIST

(1) HEX SOCKET HEAD BOLT

M8 x 19mm

QTY: 10PCS

(2) HEX SOCKET HEAD BOLT

M8 x 25mm

QTY: 8PCS

(3) HEX SOCKET HEAD BOLT

M8 x 51mm

QTY: 12PCS

(4) SPRING WASHER

Ø8.5mm

QTY: 24PCS

(5) METAL FLAT WASHER

INSIDE DIAMETER:Ø8.5mm

OUTSIDE DIAMETER:Ø16mm

QTY: 24PCS

(6) RUBBER FLAT WASHER

INSIDE DIAMETER:Ø8.5mm

OUTSIDE DIAMETER:Ø22mm

QTY: 8PCS

(7) NUT

OUTSIDE DIAMETER:Ø13mm

QTY: 6PCS

(8) ALLEN WRENCH

Ø5mm

QTY: 1PC

(9) OPEN-END WRENCH

Ø13mm

QTY: 1PC

www.craftandmain.com

assembly instructions I

•5

ASSEMBLY

Step 1:

Attach the headboard top (A) to headboard bottom (B)

with hex socket head bolts (1),spring washers (4) and

metal flat washers (5).Use Allen wrench (8) to tighten

bolts.

Step 2:

Attach the side rail (D1) to side rail (D2) with hex

socket head bolts (1),spring washers (4) and metal flat

washers (5).Use Allen wrench (8) to tighten bolts.

www.craftandmain.com

assembly instructions I

•6

ASSEMBLY

Step 3:

Attach the assembled side rails to the headboard bottom (B)

and footboard (C) with hex socket head bolts (2),spring washers

(4),metal flat washers (5) and rubber flat washers (6).Use Allen

wrench (8) to tighten bolts.

Step 4:

Attach the support legs (F) to the slats (E) with hex socket

head bolts (3).Use Allen wrench (8) to tighten bolts.

www.craftandmain.com

assembly instructions I

•7

ASSEMBLY

Step 5:

Place the slats (E) on the metal brackets of

the side rails (D1&D2).Secure using hex

socket head bolts (3),spring washers

(4),metal flat washers (5) and nuts (7).Use

Allen wrench (8) & Open-end Wrench (9) to

tighten bolts and nuts.

Ensure that the bed sets up evenly on the

floor by turning the adjustable levelers

underneath support legs (F) clockwise as the

image from Step 4 shown .

www.craftandmain.com

assembly instructions I

•8

WARRANTY

1 YEAR LIMITED WARRANTY FOR RESIDENTIAL USE ONLY

All Craft + Main product carries a limited one year warranty. The warranty covers manufacturer defects and does not cover normal wear or neglectful use. Craft + Main products are

covered by this warranty when used in non-commercial, non-institutional residential use only. The warranty is in effect for the consumer for 1 year from the date of the purchase.

Foremost Groups Inc. must be notified of the defect and provided with a documented invoice. Any claimed defect will need to be verified by Foremost Groups Inc., and it is the sole

discretion of Foremost Groups to either replace the item, or with a similar item of the same value if it the item is no longer available, repair, and/or issue credit for the merchandise.

Inspection and/or digital images may be necessary.

The warranty is made to the retailer that purchased the goods from Foremost Groups, and is non-transferable.

The warranty is valid for 1 year from the date of purchase and proof of purchase (invoice) is required for all claims.

Cost of shipping is not covered unless specifically approved by Foremost Groups Inc.

Exclusions to the warranty would include, but not be limited to:

• Product Modifications

• Improper use

• Buyer’s remorse

• Normal Wear and Use

• Assembly Damage

• Color Variations (due to the unique nature of finishes, stains, and paints, the color of a replacement items(s) may not match exactly).

• Accidental Damage

• Normal Fading or Color Changes that are inherent features to the wood

• Minor Irregularities in Distressed Finishes

• Weather Damage

• Close-out/Clearance Items

For leather and upholstered furniture:

All upholstered items are covered for a limited one year warranty against manufacturer defects. The limited warranty on upholstered items contains the same inclusions and exclusions

as detailed above. Leather, as well as, many upholstered fabrics and materials will have slight color variations and would not be considered a manufacturer defect. Cushion’s foam

based substrates will soften with time and would also not be considered a manufacturing defect. Fading or discoloration resulting from exposure to the elements, chemical or from spills

is not covered.

To obtain warranty service please contact Foremost Groups Customer Service Department toll free number at : (800) 443-1410 between the hours of 8:30 am and 5:00 pm EST,

Monday thru Friday or fax your request to (973) 428-8026 or email us at customersevice@foremostgroups.com or visit our website at www.craftandmain.com.