ASSEMBLY INSTRUCTIONS
FULL BED WITH TRUNDLE
1
YX5515
(W69740997-W69740997)
If you have any questions, please feel free to contact us.
Email: [email protected]
Detail View
2
3
Part List Hardware List YX5515
A B
Leg HB (left) -1pc
F
GI
J K L
Side rail - 2pcs
Slats - 8pcs Trundle front panel - 1pc Trundle back panel - 1pc
Trundle slats - 2pcs Slats - 5pcs
Horizontal HB/FB - 3pcs
M N
Lower support slat - 1pcLeg support - 3pcs
C
D E
Leg HB (right) -1pc
HB Frame - 1pc
Leg FB (left) -1pc
Leg FB (right) -1pc
Upper horizontal - 2pcs
O
PQ
H
Panel FB - 1pc
Horizontal FB - 2pcs
Hardware List
4
ASSEMBLY TOOLS REQUIRED ( NOT INCLUDED )
1 2
Hex-Head bolts (12pcs)
Hex-Head bolts (14pcs)
4
Allen key (1pc)
(1/4")4.5*58mm
3
Horizontal-Hole bolts(26pcs)
1/4"*15 (9.5mm)
5
Wood screws (42pcs)
8
Wheels (4pcs)
7
Wood screws (16pcs)
6
Metal bracket (2pcs)
100*63*20mm Metal bracket (2pcs)
9
5
STEP 1:
STEP 2:
Remark: We recommend you assemble your bed in the flat ground.
33
2
2
2
2
2
2
2
2
3
3
3
8PCS
2 3
8PCS
2
2
STEP 3:
STEP 4:
6
33
6PCS
2 3
6PCS
2
2
2
2
2
2
3
3
3
2
2
1
1
1
1
1
1
1
1
1
1
1
1
1
3
3
12PCS
1 3
12PCS
1
3
STEP 5:
STEP 6:
7
20PCS
5
5
Note: Do not lock the screws of the bed slats to the outermost edge of the bed slats, you
69.5mm
STEP 7:
STEP 8:
8
5
8PCS4PCS
8
5
8
5
14PCS
5
Note: Do not lock the screws of the bed slats to the outermost edge of the bed slats, you need to
leave a certain space at the edges, otherwise it will cause the board to break.
Do not lock the bed slats on the edge of the wood, please hold firmly before screwing , hold it in
234mm
STEP 9:
STEP 10:
9
8PCS2PCS
6 7
8PCS 2PCS
97
STEP 11:
10
Push Trundle under the bottom of Bunkbed.
/
