2. JasonL
  3. SPB24PT

JasonL SPB24PT Operating instructions

  • Hello! I've reviewed the assembly instructions for the Sapphire 2400 x 1200 mm Meeting Table. This document outlines the necessary steps for putting together your table, including tool recommendations and important notes on screw tightening. I'm here to help if you have any questions about the assembly process.
  • What tools are needed for assembly?
    What should I do about pre-drilled holes?
    Why completely tighten the frame before adding the top?
Need help!
Call us on
1300 527 665
www.jasonl.com.au
ASSEMBLY INSTRUCTIONS
Sapphire
Meeting Table
Size: 2400 x 1200 mm
Page 01
Note: Please ignore any pre-drilled holes or nut inserts that maybe present in your top(s). They will not match your particular
table/desk base and woods screws will be required to be screwed directly into the underside of the top.
Note: It is important to fully tighten all bolts and screws before attaching the top(s) so that the frame is suciently rigid.
Failure to do this may aect stability once the tops are attached.
Tools Required: Power screwdriver. We strongly recommend using an impact drill gun together with thread locking all screws.
Need help!
Call us on
1300 527 665
www.jasonl.com.au
ASSEMBLY INSTRUCTIONS
STEP 2STEP 1
Page 02
A * 2 B * 2
C * 2
G * 16 woodscrews
D * 6 (M8*30mm)
E * 6 (M8*30mm) F * 1
Sapphire
Meeting Table
Size: 2400 x 1200 mm
Need help!
Call us on
1300 527 665
www.jasonl.com.au
ASSEMBLY INSTRUCTIONS
STEP 3
Page 03
STEP 4
Adding the Tops
Screw the table tops through the
square top plates using woodscrews
(G*8 wood screws) through the
following holes.
Ask a second person to help to
turn the tables and bases over.
Careful: tables are heavy.
G
Sapphire
Meeting Table
Size: 2400 x 1200 mm
Need help!
Call us on
1300 527 665
www.jasonl.com.au
ASSEMBLY INSTRUCTIONS
Page 04
Sapphire
Meeting Table
Size: 2400 x 1200 mm
/