2. Emtek
  3. Passage & Privacy

Emtek Passage & Privacy Template

  • Hello! I've reviewed the provided instructions for the OVAL STRETTO door preparation. This document details the necessary steps for preparing your door, providing precise measurements and drilling instructions for different door thicknesses. I'm ready to assist you with any questions you might have about the installation process, drilling requirements or measurements.
  • What is the first drilling action?
    What to do after printing from the electronic file?
    What are the indicated backset measurements?
2"
1"
IN4-OVALSTRETTO REV 1 3/1/2023
2-1/4
1
2-3/8
BACKSET C
L
Ø1 HOLE X 4
DEEP
FOR 2
THICK DOOR
FOR 1-3/4
THICK DOOR
FOR 1-3/8
THICK DOOR
FOLD LINE ALONG EDGE OF DOOR
2-3/4
BACKSET
Ø3/8
THRU
Ø3/8
THRU
OVAL STRETTO DOOR
PREPARATION
0123
1
2
3
Caution:
If printed from electronic file
set print scale to 1:1. Measure
with ruler to check scale.
Ø1-1/4
THRU
*NOTES:
ALL DIMENSIONS ARE IN INCHES.
DO NOT PHOTOCOPY TEMPLATE (SCALE MAY BE AFFECTED).
R
1"
IMPORTANT! Ø 5/16" x 2-1/2" DEEP HOLES
MUST BE DRILLED
BEFORE Ø1 HOLE
/