1
Please inspect the contents of your shipped package to ensure you have received everything that is listed
below.
Flo Professional 4 Video Camera Slider
(SL-FLO-01)
Assembly Manual
All rights reserved.
No part of this document may be reproduced, stored in a retrieval system, or transmied by any form or by any means,
electronic, mechanical, photo-copying, recording, or otherwise, except as may be expressly permied by the applicable copyright
statutes or in wring by the Publisher.
T-Type Allen Key
5mm
What’s In The Box
100mm Bowl Adapter 1 x Mitchell plate
Proaim Flo Slider
2
Camera Slider Setup
• Rotate the cylindrical knob to allow the fric-
onless wheels to move.
• Pull the circular knob to lock the cylindrical
knob.
• Rotate the black knob to restrict mobility of
the wheels.
• Loosen the knobs on the foot of the slider to
adjust their height.
Bag Packing
3
• Remove the screws on the bowl head using
an Allen key.
• Remove the bowl head and mount the Mitch-
ell plate on the slider.
• Remove the Mitchell plate to mount the
bowl adapter.
• Image shows the bowl head securely aached
to the slider.
• Secure the Mitchel plate using screws and the
Allen key.
• Secure the bowl adapter using screws and the
Allen key.
4
YOUR PROAIM FLO PROFESSIONAL 4FT VIDEO CAMERA SLIDER
ALL DRESSED UP AND READY TO GO!
(SHOWN WITH OPTIONAL ACCESSORIES)
Warranty: We oer one year warranty for our products from date of purchase. Within this period of me,
we will repair it without charge for labor or parts. Warranty doesn’t cover transportaon costs nor does it
cover a product subjected to misuse or accidental damage. Warranty repairs are subjected to inspecon and
evaluaon by us.
Liability: We are not liable for damage caused by products that we do not supply or from mishandling in
transit, accident, misuse, neglect, lack of care of the product, or service by anyone other than our company.
Contact Us: In case of any kind of dissasfacon, please Contact us immediately and we promise our utmost
support and care unl you use our product.
/