2. FläktGroup
  3. LQQZ-01 Set of replacement humidifier fills

FläktGroup LQQZ-01 Set of replacement humidifier fills Installation guide

  • Hello! I have reviewed the provided installation instructions for the FläktGroup LQQZ-01 humidifier fill replacement set. This document outlines the steps for replacing the humidifier and distributor fills, ensuring proper orientation and tape integrity. I'm ready to answer your questions about this process and the components involved.
  • What is included in the LQQZ-01 set?
    How should the cassettes be fitted into the humidifier?
    What should be checked before installing the cassettes?
FläktGroup DC_9162GB 20180327_R0 Specifications are subject to alteration without notice
LQQZ-01 SET OF REPLACEMENT HUMIDIFIER
FILLS, C = 1, 2
INSTALLATION INSTRUCTION
Remove the cassettes from the humidifier section. Turn them up-side
down and fit the humidifier fill and distributor fill as shown below.
When the cassettes are fitted into the humidifier, the cut corner should
be located downwards and facing the direction of air flow.
N.B.! Ensure that the tape on the insides of the cassettes
is intact.
Included in
the LQQZ-01
Tape
The figure shows the cassette in the upside down position.
Humidifier fill
Distributor fillDistributor fill
Spacer strip
/