2. Industrial & lab equipment
  3. Electrical equipment & supplies
  4. Electrical controls
  5. Energy cost meters
  6. Sitecom
  7. WLE-1100
WLE-1100

Sitecom WLE-1100 Installation guide

  • Hello! I am an AI chatbot trained to assist you with the Sitecom WLE-1100 Installation guide. I’ve already reviewed the document and can help you find the information you need or explain it in simple terms. Just ask your questions, and providing more details will help me assist you more effectively!
Installation guide
WLE-1100INT_QIG_20131127.indd 1-2 09-01-14 16:09
Package content
3x SmartPlugs
Sitecom and NET2GRID
Many energy suppliers off er a way to gain insights into your energy use.
We believe that you don’t have to be tied to a supplier to gain insights
into your energy use.
NET2GRID provides an easy solution to measure and monitor your home’s
energy consumption. That’s why we have partnered up with them.
home energy
monitor
3x SmartPlugs
Extension Pack
EN
WLE-1100INT_QIG_20131127.indd 3-4 09-01-14 16:09
SmartPlug LED
Smartplug Pairing
and On/Off button
SmartPlug
• Pairing mode: LED blinking red/green, ready to connect to smartbridge.
• Smartplug ON: LED is solid green / Smartplug OFF: LED is off .
Choose your
installation method
Option 1)
With the SmartBridge
Option 2)
With the Energy Insight app
Option 3)
With a web browser
EN
WLE-1100INT_QIG_20131127.indd 5-6 09-01-14 16:09
Install your
SmartPlugs with
the SmartBridge
1
Plug the SmartPlugs into a power socket.
OPTION
• Make sure to use power sockets close to the SmartBridge for installation.
• After successful installation you can move the SmartPlugs anywhere in your house.
1
EN
!
Check if the SmartPlug LEDs are green.
If not press the button to turn on the SmartPlug.
WLE-1100INT_QIG_20131127.indd 7-8 09-01-14 16:09
Push the button on each of the three SmartPlugs for 5 seconds
until the LED starts to blink green and red.
2 3
Disconnect your SmartBridge from the wall socket.
press
5 sec.
press
5 sec.
press
5 sec.
EN
WLE-1100INT_QIG_20131127.indd 9-10 09-01-14 16:09
Plug the power adapter of your SmartBridge back into a wall socket.
4
When the LED’s turn solid blue your SmartBridge is ready.
5
EN
WLE-1100INT_QIG_20131127.indd 11-12 09-01-14 16:09
Check that the LEDs of the SmartPlugs have turned solid green.
• Now you can move the SmartPlugs and plug in the devices you would like to measure.
6
EN
• The button can now be used to turn the plugs on and off .
WLE-1100INT_QIG_20131127.indd 13-14 09-01-14 16:09
Plug the SmartPlugs into a power socket.
• Make sure to use power sockets close to the SmartBridge for installation.
• After successful installation you can move the SmartPlugs anywhere in your house.
1
Install your
SmartPlugs with
the Energy Insight app
2
OPTION
EN
!
Check if the SmartPlug LEDs are green.
If not press the button to turn on the SmartPlug.
WLE-1100INT_QIG_20131127.indd 15-16 09-01-14 16:09
Open the Energy Insight app on your smartphone.
3
Push the button on each of the SmartPlugs for 5 seconds until the
LED starts to blink green and red.
2
press
5 sec.
press
5 sec.
press
5 sec.
iOS Android
EN
WLE-1100INT_QIG_20131127.indd 17-18 09-01-14 16:09
Click “Scan”.
4
While scanning, the SmartBridge will blink white. When the
LED’s turn solid blue your SmartBridge is ready.
5
iOS Android
EN
WLE-1100INT_QIG_20131127.indd 19-20 09-01-14 16:09
Check that the LEDs of the SmartPlugs have turned solid green.
6
• Now you can move the SmartPlugs and plug in the devices you would like to measure.
EN
• The button can now be used to turn the plugs on and off .
WLE-1100INT_QIG_20131127.indd 21-22 09-01-14 16:09
Plug the SmartPlugs into a power socket.
1
• Make sure to use power sockets close to the SmartBridge for installation.
• After successful installation you can move the SmartPlugs anywhere in your house.
With a web browser
3
OPTION
EN
!
Check if the SmartPlug LEDs are green.
If not press the button to turn on the SmartPlug.
WLE-1100INT_QIG_20131127.indd 23-24 09-01-14 16:09
Open your web browser and go to http://smartbridge.local
3
Push the button on each of the SmartPlugs for 5 seconds until
the LED starts to blink green and red.
2
press
5 sec.
press
5 sec.
press
5 sec.
EN
WLE-1100INT_QIG_20131127.indd 25-26 09-01-14 16:09
Click “scan”.
4
While scanning, the SmartBridge will blink white. When the
LED’s turn solid blue your SmartBridge is ready.
5
EN
WLE-1100INT_QIG_20131127.indd 27-28 09-01-14 16:09
Check that the LEDs of the SmartPlugs have turned solid green.
6
• Now you can move the SmartPlugs and plug in the devices you would like to measure.
EN
• The button can now be used to turn the plugs on and off .
WLE-1100INT_QIG_20131127.indd 29-30 09-01-14 16:09
Apri il browser Web e vai al sito http://smartbridge.local
3
IT
2
premere
5 sec.
premere
5 sec.
premere
5 sec.
Tieni premuto per 5 secondi il tasto di ciascuno degli SmartPlug
nché non lampeggiano prima il LED verde e poi quello rosso.
WLE-1100INT_QIG_20131127.indd 109-110 09-01-14 16:10
www.sitecom.com/helpdesk
WLE-1100INT_QIG_20131127.indd 143-144 09-01-14 16:11
/