Kohler K-RH5846-4-0 Installation guide

Kohler
Brand
Kohler
Model
K-RH5846-4-0
Category
Racks
Type
Installation guide
Product Information
Applicable product:
Under-mount kitchen sink with one hole
(shown)
K-5846-1
Under-mount kitchen sink with three holes K-5846-3
Under-mount kitchen sink with four holes K-5846-4
Under-mount kitchen sink with five holes K-5846-5U
Fixture*:
Basin area 14-3/16″ (360 mm) x 16-1/16″
(408 mm)
Water depth 9″ (229 mm)
Drain holes Ø 3-7/8″ (98 mm)
Faucet holes Top-mount: Ø 1-3/8″ (35 mm)
Under-mount: Ø 2-3/8″ (60 mm)
* Approximate measurements for comparison only.
Included components:
Cut-out template 1174556-7
Under-mount sink kit 23″ (584 mm) 1054375
Recommended accessories:
P-Trap K-9000
Optional accessories:
Bottom bowl rack, left basin K-6169
Bottom bowl rack, right basin K-6197
Duostrainer
®
sink strainer K-8801
Installation Notes
Install this product according to the installation guide.
NOTICE: Countertop manufacturer or cutter must use the
cut-out template provided with the product, or a current one
provided by Kohler Co. (call 1-800-4-KOHLER). Kohler Co. is
not responsible for cutout errors when the incorrect cut-out
template is used.
Fixture dimensions are nominal and conform to tolerances in
ASME Standard A112.19.1/CSA B45.2.
K-5846-5U
K-5846-1
K-5846-3
K-5846-4
6-1/4" (159 mm)
33" (838 mm)
12" (305 mm)
2-1/16"
(52 mm)
15"
(381 mm)
1/2"
(13 mm)
22"
(559 mm)
2-11/16"
(68 mm)
9-15/16"
(252 mm)
9-5/8"
(244 mm)
4" (102 mm)
12" (305 mm)
2-1/16"
(52 mm)
2-1/16"
(52 mm)
2-1/16"
(52 mm)
2-11/16"
(68 mm)
16-1/2"
(419 mm)
1-1/2" OD
4" (102 mm)
4" (102 mm)
4-1/2"
(114 mm)
4-1/2"
(114 mm)
12-1/2"
(318 mm)
Roughing-In
K-5846
BROOKFIELD
TM
KITCHEN SINK
BROOKFIELDTM KITCHEN SINK
1179926-1-
A
  • Page 1 1

Kohler K-RH5846-4-0 Installation guide

Kohler
Brand
Kohler
Model
K-RH5846-4-0
Category
Racks
Type
Installation guide
Download PDF
report

Ask a question and I''ll find the answer in the document

Finding information in a document is now easier with AI

Related papers

Other documents