Kohler K-RH6482-4-7 Installation guide
- Category
- Flat panel accessories
- Type
- Installation guide
Product Information
Applicable product:
Top-mount kitchen sink with
four holes
K-RH6482-4
Fixture*:
Bowl area 29-3/4″ (756 mm) x 18″ (457 mm)
Bowl depth 9″ (229 mm)
Drain hole Ø 3-7/8″ (98 mm)
Faucet hole Ø 1-3/8″ (35 mm)
* Approximate measurements for comparison only.
Included component:
Cut-out template 1159401-7
Optional accessories:
Sponge caddy K-6545
Bottom bowl rack, left K-6640
Bottom bowl rack, right K-6659
Duostrainer
®
sink strainer K-8801
Cast iron cleaner, 8 oz (0.2 L) 1012525
Recommended accessories:
P-Trap K-9000
Installation Notes
Install this product according to the installation guide.
NOTICE: Countertop manufacturer or cutter must use the
cut-out template provided with the product, or a current one
provided by Kohler Co. (call 1-800-4-KOHLER). Kohler Co. is
not responsible for cutout errors when the incorrect cut-out
template is used.
Fixture conforms to ASME Standard A112.19.1/CSA B45.2. All
dimensions are nominal.
9/16"
(14 mm)
2-5/16"
(59 mm)
16-1/2"
(419 mm)
14-3/16"
(360 mm)
9-5/8"
(244 mm)
7" (178 mm)
26" (660 mm)
4"
(102 mm)
8-1/8"
(206 mm)
33" (838 mm)
22"
(559 mm)
15"
(381 mm)
1-1/2" OD
Roughing-In
K-RH6482
BELLEGROVE
TM
TOP-MOUNT KITCHEN SINK
BELLEGROVETM TOP-MOUNT KITCHEN SINK
1192045-1-
A
-
1
Kohler K-RH6482-4-7 Installation guide
- Category
- Flat panel accessories
- Type
- Installation guide
Ask a question and I''ll find the answer in the document
Finding information in a document is now easier with AI
Related papers
-
Kohler K-RH5846-4-0 Installation guide
-
-
-
-
-
-
-
-