Haier 29FA10 User guide

29FA1029FA10

COLOUR TELEVISION

OPERATING

INSTRUCTIONS

◆Stage curtain for open and close effect

◆218 programs stored

◆Multi-picture modes and sound modes selection

◆On/Off timer

◆Child lock

◆Soft exchange

◆Appointment

◆DVD component input

◆Surround sound

01

0090500881

WARNING AND CAUTIONS

1. When you clean the TV set, please pull

out the power plug from AC outlet.

Or may result in electric shock, fire or

damage to the TV set. Don't clean the

cabinet and the screen with benzene,

petrol and other chemicals.

4. Do not place the TV set near rain

or moisture as it may cause an electric

shock, or the TV set to catch fire. The TV

set must only be used

in dry indoor location.

2. In order to prolong the using life of the

TV set, please place it at a well ventilated

location.

5. The back cover must only be removed

by a registered electrical service person.

Removing the back cover may result in

electric shock, fire or damage to

the TV set.

3. Don't place the TV

set in direct sunlight

or near heat source.

6. If the TV set is not going to be used for

a long time, or there is a severe thunder &

lightening storm, it is recommended that

the TV set be disconnected from the AC

power outlet and the aerial plug

Explanation on the display tube

When the picture tube requires cleaning, please disconnect the power and use a

dry soft cotton cloth. Do not use any cleaner or abrasive cloth.

1

CONTENTS

Warning and cautions................................................................................................1

Basic feature..............................................................................................................2

Technical specification..............................................................................................2

Preparing for operations............................................................................................3

Function buttons and external sockets......................................................................4

AV connections........................................................................................................5

Remote controller guide...........................................................................................6

Power supply............................................................................................................7

Tuning procedure.....................................................................................................7

Picture and audio adjustment function ..................................................................11

Time function.........................................................................................................14

Setting function .....................................................................................................17

Game......................................................................................................................22

Trouble shooting guide..........................................................................................23

BASIC FEATURE

TECHNICAL SPECIFICATION

1.CRT: 29"

2.COLOUR SYSTEM: PAL N TSC4.43/3.58(AV)

3.AUDIO SYSTEM: BG DK I M N

4.POWER SUPPLY: See rating plate

5.POWER CONSUMPTION: See rating plate

6.ANTENNA INPUT IMPEDANCE : 75Ω

7.SOUND OUTPUT POWER: 5W+5W

8.NET WEIGHT(Kg): 4 6

9.NET DIMENSION (mm): 800 × 525 ×598

Supplied accessories:

Infrared remote control handset 1

Battery(AA) 2

Operating instruction 1

Design and specifications are subject to change without notice.

2

◆Stage curtain for open and close effect

◆218 programs stored

◆Multi-picture modes and sound modes selection

◆On/Off timer

◆Child lock

◆Soft exchange

◆Appointment

◆DVD component input

◆Surround sound

Figure A Figure B

Antenna cable

with a plug

Figure C Figure D

Antenna feeder

Antenna adapter

75-300Ω

Coaxial cable(75Ω) twin-lead cable(300Ω)

Antenna connection

Connect an antenna to the antenna socket on

the TV set, we recommend using a Cable TV

system for better picture and audio quality.

1.If you use a coaxial cable(75Ω),insert the

antenna plug (see figure C) into 75Ωsocket

(see figure A).

2.If you use a twin-lead cable(300Ω),please

shape the cable as figure D, and connect the

leads to antenna adapter and then insert the

antenna adapter into the 75Ωsocket(see

figure B).

Power source wire connection

Insert the power plug into AC outlet.

Install and replace batteries of the

remote control unit:

1.Place the remote control unit with the face

down, then open the battery cover of the

unit.

2.Place the two"AA"size batteries, matching

the + and - signs on each battery to the +

and -signs of the battery compartment.

3.Close the cover of the battery compartment.

NOTE:

(1)Don't drop or wet or dismantle the unit.

(2)If you don't intend to use the unit for a

long period or the electricity of the

batteries is used up, remove the batteries

to prevent batteries acid from leaking

into the battery compartment.

(3)Replace the two old batteries at the

same time.

(4)Don't use charge battery (Ni-cd )and

don't mix battery type.

(5)Don't throw your batteries into a fire.

Dispose of your batteries in a required

place.

PREPARING FOR OPERATIONS

3

Antenna

AV CONNECTIONS

5

FUNCTION BUTTONS AND EXTERNAL SOCKETS

4

①Remote sensor:Let the remote controller aim here the set can receive remote

control signal.

②Power switch:Press the button to turn on the TV set ,press the button again to turn

off the TV set.

③Power indicator: The indicator lights when power on.

④Menu button

⑤Program up/down button

⑥Volume up/down button

⑦TV/AV

W

R

B

G R

DVD(with DVD component)

W

R

G

B

Direction of signal

white（left audio）

red（C /right audio ）

blue（C ）

green

（video）

（Y）

yellow

r

b

Y

VCR (without S-VIDEO terminal)

Y

W R

T

o

a di

o

u

t

u

o

VCR (with S-VIDEO terminal)

W R

s e

o

t

T

o

-

v

id o

utpu

v

o

u

To

ide

o

tpu

t

o

m

p e t

uT c

o o

n

o t

Note:

1.When receives s-video signal, you must remove video signal; when receive

video signal, you must remove s-video signal.

2.When receive front video signal, you must remove back video signal; when

receive back video signal, you must remove front video signal.

1.Front Panel

操

作

之

前

S-VIDEO

2.The sockets on the rear panel

①Antenna socket

②Audio/Video socket

③S-Video socket

④DVD component socket

VIDEO

IN

L AUDIO R

Y

Cb

Cr

OUT

①

②

③

④

S-VIDEO

VIDEO

IN

L AUDIO R

Y

Cb

Cr

OUT

AUDIO

VIDEO

L

R

CH+

CH-

VOL+

VOL-

TV/AV

MENU

①

②

③

⑤

⑥⑦

④

POWER SUPPLY

Power supply (switch on/off to set main power supply).

1.Press power switch button to switch on AC power supply. The red power indicator

will light.

2. Press the power switch button on the remote controller to enter normal receiving

condition when the TV set is in standby condition.

There are Auto-search, Semi-Auto search and

Fine tuning method.

Auto-search

1.Press [MENU] button, let main menu display

on the screen, then press [-VOL+] buttons to select

TUNING item.

2.Press [CH-] button to enter TUNING menu, then

press [-CH+] buttons to select AUTO MEMORY.

3. Press [VOL+] button to make the AUTO MEMORY

mode work, the TV set will begin to search

programs from program number 0.

After the search is finished, program number

0 will display on the screen.

Note: During auto-search, if you want to stop searching,

press [VOL-] button.

TUNING PROCEDURE

Remote controller functions

TV/AV exchanging button

Mute button

Numeric button

One/two/three digital buttons

Picture mode selection

Volume up/dwon button

1

2

3

4

5

6

11

15

16

17

7

Program play-forward button

8

Surround sound selection button

9

10

Volume mode selection

Display button

12

Game start or restart button

13

14

System preset button

Lock preset button

Scan button

DC standby button

18

Sleep timer

Game background selection button

Game exit button

10

6 7

19

20

Calendar display button

REMOTE CONTROLLER GUIDE

17

18

16

3

15

14

13

1 2 3

4 5 6

7 8 9

0

TV/AV

SCAN

LOCK

SYSTEM

DISPLAY

-/--

CALENDAR

MENU

CH+

PRE

STEREO

GAME

BACK

P.STD

S.STD

CH-

VOL- VOL+

1

2

5

4

6

8

9

11

10

12

7

EXIT

MODE

19

20

Program play-backward button

Intell igent button:

The numeric butt on“1”has in tell igent fu nction,

press it for 6s, th en th e TV set will se arc h and sto re

the program automatically. Press 0 button conti nuall y

for 6s, the brig htness, colo r, sh arp ness and ti nt wil l be

adjuste d to the factory preset sta tus automaticall y.

ASM VL 0

STOP

SOUNDPICTURE

SELECT

CONFIRM

TIMER

TUNING

FUNCTION

SELECT

ADJUST

POSITION 01

BAND VL

SKIP OFF

SEARCH DOWN

MFT UP

AUTO MEMORY

49.87 MHZ

TUNING PROCEDURE

Press [MENU] button, let main menu display on the

screen, then press

3.Press [CH-] button to enter TUNING sub-menu. Then

press

4.Press [-VOL+] buttons to start searching.

Semi-Auto search

1.Press [-CH+] buttons or numeric button (0~9) to

select the channel number you need. (For example:

channel 1).

2.

[-VOL+] buttons to select TUNING

item.

[CH-] button to select SEARCH item.

[CH-] button

is to search the program from low FC. [CH+] button is

to search the program from high FC. Repeat above

procedure until you find the channel you need.

5.When you intend to memory another channel in

another position, press [-CH+] buttons to select

POSITION item, and use [-VOL+] button to select

a number you need, then press [CH-] button to

select SEARCH, and repeat fourth

procedure.

8

Skip

After pre-tuning the channel, you can skip the

channel you do not need in order to only select

the channel you want to watch.

1.Press [-CH+] buttons or numeric button(0~9) to

select the channel number skipped(for example:

channel 1).

2.Press [MENU] button, let main menu display on

the screen, then press [-VOL+] buttons to select

TUNING item, then press [CH-] button to enter

TUNING menu.

3.Press [-CH+] buttons to select SKIP item.

4.Press [-VOL+] buttons to set SKIP ON mode.

5.Press [DISPLAY] button to shut off the menu. The

channel number will be skipped when you use

[-CH+] buttons to select channels. But you can

still use numeric button to select the channel

number skipped.

Note:

1.You can use the numeric button to select the

channel number that need recover.

2.Press [MENU] button to let the main menu

appear on the screen, then press [-VOL+]

buttons to select TUNING, and press [CH-]

button to enter TUNING menu, then select SKIP.

3.Press [-VOL+] buttons to set SKIP OFF mode.

9

TUNING PROCEDURE

1

SOUNDPICTURE

SELECT

CONFIRM

TIMER

TUNING

FUNCTION

SELECT

ADJUST

POSITION 01

BAND VL

SKIP OFF

MFT UP

SEARCH DOWN

AUTO MEMORY

49.87 MHZ

SELECT

ADJUST

POSITION 01

BAND VL

SKIP OFF

MFT UP

SEARCH DOWN

AUTO MEMORY

49.87 MHZ

SELECT

ADJUST

BAND VL

SKIP OFF

SEARCH DOWN

MFT UP

POSITION 01

AUTO MEMORY

49.87 MHZ

SELECT

ADJUST

BAND VL

SKIP OFF

SEARCH DOWN

MFT UP

POSITION 01

AUTO MEMORY

49.87 MHZ

SELECT

ADJUST

POSITION 01

BAND VL

SEARCH DOWN

MFT UP

SKIP OFF

AUTO MEMORY

49.87 MHZ

SELECT

ADJUST

POSITION 01

BAND VL

SEARCH DOWN

MFT UP

SKIP OFF

AUTO MEMORY

49.87 MHZ

10

Picture mode selection

You can select the picture mode you need

quickly in five preset modes and a user's

personal set.

Press [ P.STD] button to select the picture

quality you need. There are six picture modes

you can select in turn.

DYNAMIC, STANDARD, MILD, MEMORY,

PICTURE MUTE and COLOR MUTE.

Mode Picture quality

DYNAMIC Rich , Bright Movie

STANDARD Proper color

MILD Soft, Light

MEMORY The picture quality you set

PICTURE MUTE function ( no signal)

COLOR MUTE Black &White picture

Note: If the picture in PICTURE MUTE or COLOR MUTE

status, the TV set will recover to DYNAMIC

status when restart.

Adjust the picture status you need to Memory.

1.

Item Press [VOL-]button

CONTRAST Weak Strong

BRIGHT Dark Bright

COLOR Light Dark

SHARP Soft Sharp

B.B Light green Light purple

Note: Tint is only appear in N signal, the method of adjustment is the same

as above.

Picture mute

Press [MENU] button, let main menu display on

the screen, then press [-VOL+] buttons to select

PICTURE item, then press [CH-] button to enter

PICTURE menu.

2.Press [-CH+] buttons to select the item you want

to adjust, then press [-VOL+] buttons to adjust to

your expect effect. The picture status will be stored

to the COLOR MUTE item.

Press [VOL+]button

PICTURE AND AUDIO ADJUSTMENT FUNCTION

11

TUNING PROCEDURE

Fine tuning

Because of some reasons, if auto searching effect of program

isn't good, please fine tune your TV set.

1.Press [-CH+] buttons or numeric button(0~9)

to select the channel number that need to fine

tune.( For example: channel1)

4.Press and hold [-VOL +] buttons until the effects

of the picture and audio are good.

2.Press [MENU] button, let main menu display on

the screen, then press [-VOL+] buttons to select

TUNING item, then press [CH-] button to enter

TUNING menu.

3.Press [-CH+] buttons to select MFT item.

[VOL -] button is to search program from low FC.

[VOL+] button is to search program from low FC.

1

DY NAM IC

MILD

MEMORY

COLOR MUTE

STANDARD

PICTURE MUTE

SELECT

ADJUST

CONTRAST 100

BRIGHT 50

COLOR 50

B.B ON

SHARP 50

SELECT

ADJUST

POSITION 01

BAND VL

SEARCH DOWN

SKIP OFF

MFT UP

AUTO MEMORY

49.87 MHZ

SELECT

ADJUST

BAND VL

SEARCH DOWN

MFT UP

POSITION 01

SKIP OFF

AUTO MEMORY

49.87 MHZ

12

S.C.C

There is soft exchange function in this TV set, when you set this function is ON

and exchange channels, the picture will fade in/fade out to protect your eyes.

1.Press [MENU] button, let main menu display on

the screen, then press [-VOL+] buttons to select

FUNCTION item, then press [CH-] button to enter

FUNCTION menu.

2.Press [-CH+] buttons to select S.C.C item, then press

[-VOL+] buttons to set the S.C.C ON/OFF.

MUTE function

When you need pay attention to the surround sound or answer the telephone or the

guest to visit, using mute function will be convenient.

1.Press [MUTE] button on the remote controller, the( )

will appear at the bottom of the screen, at this time

the sound will be shut off.

2.If you want to recover the sound, you can press the

MUTE button again or press the [-VOL+] buttons

directly.

13

PICTURE AND AUDIO ADJUSTMENT FUNCTION

Sound mode selection

You can select the sound mode you need from

three modes quickly.

Press [S.STD] button to select the sound quality

you need. There are THEATER, NEWS, MUSIC,

PERSONAL to select in turn.

Volume set function

You can adjust the volume to your preset value

quickly(for example: BASS, TREBLE, BALANCE

or S.WOOFER)

1.Press [MENU] button to let main menu display on

the screen, then press [-VOL+] buttons to select

SOUND item, then press [CH-] button to enter

SOUND menu.

2.Press [-CH+] buttons to select BASS item, then

press [-VOL+] buttons to adjust to your expect

effect. You can adjust the parameters of TREBLE,

BALANCE and S.WOOFER by using the same way.

Note: If you want to adjust the S.WOOFER volume,

you should set the S.WOOFER ON.

THEATERTHEATER

NEWSNEWS

MUSICMUSIC

PICTURE AND AUDIO ADJUSTMENT FUNCTION

PERSONALPERSONAL

SELECT

ADJUST

TREBLE 68

BALANCE ±00

S.WOOFER ON

S.WOOFER 100

BASS 66

LANG. ENGLISH

CURTAIN III

POS. EX.

AUTO OFF OFF

S.C.C OFF

SELECT

ADJUST

SELECT

ADJUST

BASS 66

BALANCE ±00

S.WOOFER ON

S.WOOFER 100

TREBLE 68

SELECT

ADJUST

BASS 66

TREBLE 68

BALANCE ±00

S.WOOFER 100

S.WOOFER ON

Off timer function

When you use OFF TIMER function, you can make the TV set switch to the

standby status in that the appointing timer is coming.

1.Press

[MENU] button to let the main menu display

on the screen, then press [-VOL+] buttons to select

TIMER item.

2.Press [CH-] button to enter TIMER menu, then

press [-CH+] buttons to select OFF TIMER item,

then press [-VOL+] buttons repeatedly to set

ON-TIMER to ONCE, EVERY or OFF.

3.Press [CH-] button to select the next item, at this

time, you can set the off time by pressing [-VOL+]

buttons.

4.Press [-CH+] buttons to select CLOCK item, then

you can set the current time by pressing [-VOL+]

buttons. ( on timer/off timer take this clock as

standard )

TIME FUNCTION

14

15

TIME FUNCTION

Sleep timer function

Using the sleep timer function, the TV set can switch to the standby status

automatically when the TV set restarts after an appointing certain time.

1.The sleep timer can be set 120 minutes longest, and it can

change every 10 minutes unit, there are 12 off timer in all.

2.Press[ ] button, the bottom of the

screen will display the right figure cycle.

On timer function

Using ON TIMER function in the standby status, the TV set can connect power

supply and broadcast the appointing channel number automatically when the

appointing time is coming.

1.Press [MENU] button to let the main menu appear

on the screen, then press [-VOL+] buttons to select

TIMER item, then press [CH-] button to enter

TIMER menu.

2.Press[-CH+] buttons to select ON TIMER item,

then press [-VOL+] buttons repeatedly to set the

ON TIMER to OFF, ONCE or EVERY .

3.Press[-CH+] buttons to select next item. At this

time, press [-VOL+] buttons to set ON TIMER(the

method is the same as OFF TIMER).

4.Press[-CH+] buttons to select POS 00 item, then press

[-VOL+] buttons to set ON/OFF TIMER channel

number(for example 05).

5.Press[-CH+] buttons to select CLOCK item, then

press [-VOL+] buttons to set the current time(the

method is the same as OFF TIMER, ON/OFF

TIMER takes this clock as standard).

SLEEP: OFFSLEEP: OFF

SLEEP: 120MINSLEEP: 120MIN

SLEEP: 110MINSLEEP: 110MIN

SLEEP: 20MINSLEEP: 20MIN

SLEEP: 10MINSLEEP: 10MIN

SELECT

ADJUST

19:00

ON TIMER OFF

22:00

POS 0

CLOCK 1:40

APPOINTMENT

OFF TIMER ONCE

0

SELECT

ADJUST

19:00

ON TIMER OFF

22:00

POS 0

CLOCK 1:40

APPOINTMENT

OFF TIMER ONCE

0

SELECT

ADJUST

ON TIMER OFF