Haier 34P9A Operating Instructions Manual

MAIN FUNCTION

34P9A

0090504754

Colour Television

Operating Instructions

◆218 Programmes stored

◆Dynamic noise reduction

◆Multi-picture modes, multi-sound modes selection

◆Auto-correcting black balance

◆Surround stereo

CONTENTS

WARNING AND CAUTIONS...............................................................................................................1

BASIC FEATURE..................................................................................................................................2

TECHNICAL SPECIFICATION............................................................................................................2

FUNCTION BUTTONS AND EXTERNAL SOCKETS.......................................................................3

REMOTE CONTROLLER BOARD......................................................................................................5

OPERATION MENU..............................................................................................................................6

MULTI FUNCTION TIMER.................................................................................................................10

PROGRAM NUMBER EXCHANGE...................................................................................................11

GENERAL OPERATION.......................................................................................................................12

EXTERNAL CONNECTIONS...............................................................................................................14

TROUBLESHOOTING GUIDE.............................................................................................................15

BASIC FEATURE

TECHNICAL SPECIFICATION

●218 programs stored

●Auto-correcting black balance

●Surround stereo

●Blue extension, green improvement

●Multi-picture modes and multi-audio modes

●Audio/Video input, S-Video input

●DVD component input

●NICAM

WARNING AND CAUTIONS

1. When you clean the TV set, please pull

out the power plug from AC outlet.

Or may result in electric shock, fire or

damage to the TV set. Don't clean the

cabinet and the screen with benzene,

petrol and other chemicals.

4. Do not place the TV set near rain

or moisture as it may cause an electric

shock, or the TV set to catch fire. The TV

set must only be used

in dry indoor location.

2. In order to prolong the using life of the

TV set, please place it in a well ventilated

location.

5. The back cover must only be removed

by a registered electrical service person.

Removing the back cover may result in

electric shock, fire or damage to

the TV set.

3. Don't place the TV

set in direct sunlight or

near heat source.

6. If the TV set is not going to be used for

long time, or there is a severe thunder &

lightening storm, it is recommended that

the TV set be disconnected from the AC

power outlet and the aerial plug

removed.

Explanation on the display tube

When the picture tube requires cleaning, please disconnect the power and use

a dry soft cotton cloth. Do not use any cleaner or abrasive cloth.

1 2

POWER SUPPLY: See rating plate

TV SYSTEM: B/G

COLOUR SYSTEM: PAL NTSC3.58/4.43 (AV)

CRT: 34"

AERIAL INPUT IMPEDANCE: 75Ωunbalanced

VIDEO INPUT: 1.0VP-P(75Ω)

AUDIO INPUT: 436mVrms(40KΩ)

VIDEO OUTPUT: 1.0VP-P(75Ω)

AUDIO OUTPUT: 436mVrms(>600Ω)

SOUND OUTPUT POWER: 5W+5W

POWER CONSUMPTION: 150W

NET WEIGHT(kg): 69

NET SIZE(mm): 880×567×669

Supplied accessories:

Infrared remote control handset 1

Battery(AA) 2

Operating instructions 1

Design and specifications are subject to change without notice.

Figure A Figure B

Antenna cable

with a plug

Figure C

Figure D

Antenna feeder

Antenna adapter

75-300Ω

Coaxial cable(75Ω) twin-lead cable(300Ω)

Antenna Connection

Connect an antenna to the antenna socket on

the TV set,we recommend using a Cable TV

system for better picture and audio quality.

1.If you use a coaxial cable(75 ),insert the

antenna plug (see figure C) into 75 socket

(see figure A).

2.If you use a twin-lead cable(300 ),please

shape the cable as figure D,and connect the

leads to antenna adapter and then insert the

antenna adapter into the 75 socket.(see

figure B)

Power source wire connection

Insert the power plug into AC outlet.

To install and to replace batteries of the remote

control unit

1.Place the remote control unit with the face

down, then open the battery cover of the unit.

2.Place the two"AA"size batteries, matching

the + and - signs on each battery to the +

and -signs of the battery compartment.

3.Close the cover of the battery compartment.

NOTE:

(1)Don't drop or wet or dismantle the unit.

(2)If you don't intend to use the unit for a

long period or the electricity of the

batteries is used up, remove the batteries

to prevent batteries acid from leaking into

the battery compartment.

(3)Always replace both batteries at the same

time.

(4)Do not use rechargeable batteries (Ni-cd)

or mix battery types.

(5)Never place batteries in a fire. Dispose

of the batteries with your domestic

rubbish collection.

Ω

FUNCTION BUTTONS AND EXTERNAL SOCKETS

(8)S-video input

(9)Video input/output

(10)DVD component input

(11)Antenna input

(12)Audio input/output

Y

Cb

OUT

S-VHS

Cr

IN

VIDEO

L AUDIO R

(1)Remote sensor: let the remote controller aim here the set can receive remote

control signal.

(2)Power switch: press the button to turn on the TV set . Press the button again to turn

off the TV set.

(3)Power indicator: the indicator lights in standby status ,the indicator lights in sleep

status . The indicator glints when you use remote controller.

(4)Menu button

(5)Program up/down button

(6)Volume up/down button

(7)TV/AV

(8)

(9)

(11)

(12)

3 4

FUNCTION BUTTONS AND EXTERNAL SOCKETS

Antenna

(10)

2.Rear Panel and Side Panel

1.Front Panel

(1)

(2)

(3)

(4)

(6)

(5)

(7)

MENU

TV/AV

_

VOL

VOL +

_

CH

CH +

VIDEO

AUDIO-R

AUDIO-L

AUDIO

VIDEO

R

L

1.Entering and exiting menu

Press MENU button on the remote controller once (or directly

press PICTURE button on the remote controller),PICTURE

menu displays on the screen; press MENU button

twice (or directly press SOUND button on the remote

controller), SOUND menu displays on the screen.

Press the menu button again (3 times, or directly press

TIME button on the remote controller), TIME menu displays

on the screen. Press the menu button again (4 times, or directly press FUNCTION button on the

remote controller), FUNCTION menu displays on the screen. Press the menu button again (5

times or directly press TUNE button on the remote controller), TUNE menu displays on the

screen. Press the menu button again (6 times), EXCHANGE menu displays on the screen .To

turn off the on-screen menu display, either press the EXIT button or allow the TV set to

automatically turn off the menu by not pressing any button for a few seconds.

2.Auto search

A. Press MENU button five times continually (or directly press TUNE button on the remote

controller), e

Press MENU button five times continually (or directly press TUNE button), ensure that the

TUNE menu is displayed. Press the CH+/- buttons to select SEARCH. Then press the VOL+

button to search up or VOL- button to search down to the next TV station.(It is much faster to

search up.) If the wrong station is found, press the search button again. You may need to

repeat this until the correct station is located. To store the new program, press the EXIT

button.

4.Fine tune

If the picture or sound is poor, try to use the "FINE TUNE" feature. Select the

FINE TUNE by using the CH +/- buttons. Use the VOL +/- buttons to fine tune the

sound and picture for optimum results. Then press the EXIT button to store the

results. Do not use this feature unless reception is poor.

nsure that the TUNE menu is displayed. Press the CH+/- buttons to select

AUTO SEARCH. Then press the VOL+ button, the TV set will begin to search programs

from present programme No..

B. After the search has finished, the TV set will return to the first program that is stored.

3.Search

5.Selecting the sound system

Press the CH+/- buttons to select SOUND item. Then press the VOL+/- buttons to select a sound

system you need.

TUNING

COLOR SYSTEM AUTO

SOUND SYSTEM B/G

BAND VHFL

SKIP OFF

PROG NO 19

SEARCH

FINE TUNE

AUTO SEARCH

OPERATION MENU

6.Selecting color system

Usually this should be set in the auto position. However if the colours displayed on

the screen are incorrect you can manually select the correct colour system. When

you have finished remember to turn it back to auto again so that other programs

will still work correctly. Use the CH+/- buttons to select COLOUR then the VOL+/-

buttons to select a color system you need. Press the EXIT button to save the setting.

MARK

FUNCTION DESCRIPTION

MUTE

STANDBY

ONE DIGIT SELECTION

ONE OR TWO OR THREE DIGITS PRE-SELECTION

TV/VIDEO SELECTION

MENU DISPLAY

SWAP PROGRAM BETWEEN THE PRESENT AND THE LAST

VOLUME CONTROL

CHANNEL NUMBER UP/DOWN

0-9

-/--

TV/AV

MENU

SWAP

-VOL+

-CH+

PICTURE MENU

PICTURE

SOUND MENU

SOUND

TIME MENU

TIME

FUNCTION MENU

FUNCTION

NOTE：

The function of selecting menu button on the remote controller is

the same as that of program up/down button on the TV set.

The fuction of identifying menu button on the remote controller

is the same as that of volume up/down button on the TV set.

T

M

U

E

S A

C

N

PROGRAM SCAN

O

Z

O

M

O

Z

O

M

C

A

L

S AYD

I L

P

I

E

X

T

I

I-

I

TD

P

S.

T

S

.

S

D

E

TU

N

CHILD LOCK

PICTURE MODE SELECTION

SOUND MODE SELECTION

TUNE MENU SELECTION

EXIT MENU DISPLAY

REMOTE CONTROLLER BOARD

1 2

3

4

5

E

X

I

T

.

ST

P

D

S

.ST

D

C

A

S N

LOC

K

P

CT

I

U

RE

VO

L

-

+C

H

+

V

O

L

-

C

H

M

U

TE

6

I E

N

U

S

N

M

U T

N

E

O

U

D

T

F

C IO T N

7 8

9

/

V A

T V

-

/

-

ZOOM

C

L

A

L

0

-

I

.

P

M N

E U

W

S A

P

L

C

O K

NICAM/MONO SOUND SELECTION

Setting Channel

5 6

Press the MENU button once or press the PICTURE button

on the remote controller to display the PICTURE setting

menu.

1.Contrast (adds depth to the picture)

Press the CH+/- buttons to select CONTRAST, then

press the VOL+/- buttons to adjust the contrast level.

2.Brightness (adds sparkle and shine to the picture)

Press the CH+/- buttons to select BRIGHTNESS, then press the VOL+/- buttons

to adjust the brightness level.

3.Colour (adds colour depth)

Press the CH+/- buttons to select COLOUR, then press the VOL+/- buttons to

adjust the colour level.

4.Sharpness (adds fine detail)

Press the CH+/- buttons to select SHARPNESS, then press the VOL+/- buttons to

adjust the sharpness level.

Note: Do not turn the sharpness up to high if the reception is poor or has lots of

noise as it will enhance the fine grain details.

7.Program skip

The program skip feature enables you to skip/hide programs that you do not

wish to be displayed when using the CH+/- buttons. These channels will still

be displayed by directly using the channel number buttons on the remote

controller. To skip , press the CH+/- buttons to select the SKIP menu, press the

VOL+/- buttons to tune the skip feature on/off. Press the EXIT button to save

the setting.

8.Program number

The program number is the remote control channel number. You can change the

program number to see channels stored without exiting this main menu. Press the

CH+/- buttons to select PROGRAM, press the VOL+/- buttons to change the

program number that you are adjusting.

9.Band switching (Note: This is a new item.)

If you already know what band the channel is on, tuning can speed up by selecting

the correct band before going into the search menu. This feature should only be

used if you understand the channels in your local area.

Picture Adjustments

PICTURE

CONTRAST 89

BRIGHTNESS 66

COLOUR 50

SHARPNESS 50

IIIIIIIIIIIIIIIIIIIIIIIII..........

OPERATION MENU

Sound Adjustments

Press the MENU button twice or press the SOUND button on the remote controller

to display the sound setting menu.

2.Bass (add low frequency depth)

Press the CH+/- buttons to select BASS, then

press the VOL+/- buttons to adjust the bass level.

3.Treble (add high frequency clarity)

Press the CH+/- buttons to select TREBLE, then

press the VOL+/- buttons to adjust the treble

level.

4.Balance (selects between the left and right

stereo channel levels)

Press the CH+/- buttons to select BALANCE,

then press the VOL+/- buttons to adjust the

balance level.

5.Surround (enhances the stereo effect by

making the sound appear wider)

Press the CH+/- buttons to select SURROUND,

then press the VOL+/- buttons to turn this feature

on/off.

1.Volume (adjust the loudness level)

Press the CH+/- buttons to select VOLUME,

then press the VOL+/- buttons to adjust the

volume level.

SOUND

VOLUME 50

BASS 50

TREBLE 50

BALANCE 0

IIIIIIIIIIIIIIIIIIIIIIIII..........

SURROUND OFF

OPERATION MENU

7 8

5.Hue

Press the CH+/- buttons to select HUE, then press the VOL+/- buttons to adjust

the hue level.

Note: Hue is only used in the AV mode.

TIME

CLOCK --:--

ON TIME --:--

ON PROG 1

OFF TIME --:--

SLEEP TIME 0

REMIND TIME --:--

REMIND PROG 1

COUNT 00000 :32

Multi Function Timer

The TV set has in built a comprehensive timer

that has five basic functions.

1.Clock

2.On time so that the TV set can be programmed

to turn on at a certain time.

3.Off time to allow the TV set to turn off at the

preset time.

4.Sleep timer to allow the TV set to turn off after

10 ~ 180 minutes.

5.Program remind timer, that displays an on-

screen reminder prompt, when a program on a

different channel is due to start.

Selecting the clock menu

Press the MENU button three times until the CLOCK menu is displayed or press

the yellow time button on the remote controller.

1.Clock (master timer clock)

Press the CH+/- buttons to select CLOCK, then press the VOL+/- buttons to

adjust the hour. Press the CH- button to select minute and the VOL +/- buttons to

adjust the minute.

2.On time

Press the CH+/- buttons to select ON TIME, then press the VOL+/- buttons to

adjust the hour. Press the CH- button to select minutes and the VOL+/- buttons to

adjust the minutes. Press the CH- button to select ON-PROG and the VOL+/-

buttons to select the TV channel that the TV set will automatically turn on to.

3.Off time

Press the CH+/- buttons to select OFF TIME, then press the VOL+/- buttons to

adjust the hour. Press the CH- button to select minute and the VOL+/- buttons to

adjust the minute.

4.Sleep timer

Press the CH+/- buttons to select SLEEP TIMER, then press the VOL+ button

Note: When the set is disconnected from the power supply or is turned off by the

main power switch on the front panel, the clock looses power and will need

to be reset when the power is reconnected.

MULTI FUNCTION TIMER

FUNCTION

LANGUAGE ENGLISH

BACKGROUND ON

BLACK STRETCH ON

NOISE REDUCE OFF

FADE ON

AVL OFF

SOFT CHANGE OFF

7.AVL (Automatic Volume Limit control reduces effect of large volume

changes such as when the ads come on.) Press the CH+/- buttons to select

AVL, then press the VOL+/- buttons to turn this feature ON/OFF.

Calendar Menu (enables the TV set internal calendar to be set)

Enter CALENDAR menu, press CH+/- buttons to select year, month date, press

the VOL+/- buttons to change calendar setup.

2.Background (If the signal is very poor or there is no

input signal the picture will mute to black.)

Press the CH+/- buttons to select BACKGROUND,

then press the VOL+/- buttons to turn this feature

ON/OFF.

3.Black stretch(Adds Deeper Blacks and increases the contrast range)

Press CH+/- buttons to select BLACK STRETCH, then press the VOL+/- buttons

to turn this feature ON/OFF.

4.Noise reduce (Picture Noise & Grain reduction circuit)

Press the CH+/- buttons to select NOISE REDUCE, then press the VOL+/- buttons

to turn this feature ON/OFF.

OPERATION MENU

6.Fade

The FADE control allows time for the picture tube to warm up and gently

turned on, which can help prolong the life of the picture tube.

Function Menu

9

10

CALENDAR

SOLAR 2004 1 1

S M T W T F S

1 2 3

4 5 6 7 8 9 10

11 12 13 14 15 16 17

18 19 20 21 22 23 24

25 26 27 28 29 30 31

1.Language selection

Press the CH+/-buttons to select LANGUAGE, then

press the VOL+/-buttons to select an OSD language

you need.

to adjust the amount of time before the TV set will automatically turn off. Each

time the VOL+ button is pressed the sleep time will increase by 10 minutes. The

maximum sleep time is 180 minutes.

5.Remind time

Press the CH+/- buttons to select REMIND TIME, then press the VOL+/- buttons

to adjust the hour.

Press the CH- button to select minute and the VOL +/- buttons to adjust the minute.

Press the CH- button to select REMIND PROG and the VOL +/- buttons to select the

TV channel that the TV set will automatically remind you to turn to while watching

another channel.

Program Number Exchange

This feature enables TV programs that

may be on a wrong TV channel number

to be swapped/exchanged. This feature

is very useful when Automatic Search

Tuning has been used, to reallocate the

found programs to the correct channel

numbers.

Press the MENU button 7 times until the

exchange menu is displayed.

Press the CH+/- buttons until program 1 is

selected. Use the VOL+/- buttons to

select the channel number to be swapped.

(I.E If you wish to exchange channel 2

and 4 PROGRAM 1 should = 2.)

Press the CH+/- buttons until program 2 is

selected. Use the VOL+/- buttons to

select the channel number to be swapped.

(I.E If you wish to exchange channel 2

and 4 PROGRAM 2 should = 4.)

Press the CH+/- buttons until EXCHANGE is

selected. Press the VOL+ button to

enable the exchange.

1.Channel changing (218 possible channels)

Use either the CH+/- buttons on the remote controller or the front panel of the TV set

to change the channels. Or directly enter the channel number with the numeric button

on the remote controller.

To select channel numbers from 10 ~ 99, press [-/--] button and enter the two digits

channel number. To select channel numbers from 100 ~ 217, press [-/--] button and

enter the 3 digits channel number.

2.Volume adjustment

Press the VOL+/- buttons on the remote controller or the front of the TV set to adjust

the volume level. The range is 0~100. When the volume buttons are pressed, the

volume level is displayed automatically on the TV screen.

3.Standby

Using the remote controller the TV set can be placed into standby mode. Standby

mode must be used when the timer features is operated correctly. A red standby

light will glow on the TV front panel when the TV set is placed into standby. To turn

the TV set back on again, press standby button on the remote controller again. It will

take a few seconds before a picture will be displayed.

4.Mute

Press the MUTE button on the remote controller to mute the TV sets sound. Pressing

the MUTE button again will turn the sound back on again.

5.Preset picture modes

Our engineers have designed in 5 commonly used picture settings to allow fast

picture level selection depending on what type of TV program is showing. Each

mode is selected in turn by pressing the "P. STD" button on the remote controller.

The 5 modes are:

Listen- This is a new feature that blacks out the TV screen when listening to

music only channels.

Soft - Designed for night time low light viewing.

Standard - Designed for rooms that have good all round lighting.

Rich - Designed for rooms with high ambient lighting such as daytime sport.

User- A spare setting that can be adjusted to personal tastes.

All the 5 modes can be independently adjusted by using the PICTURE

adjustment menu.

EXCHANGE

PROGRAM 1 1

PROGRAM 2 1

EXCHANGE

MULTI FUNCTION TIMER

GENERAL OPERATION

PROGRAM NUMBER EXCHANGE

11

12

6.Preset sound modes

Our engineers have designed in 4 commonly used sound modes to allow the

best possible sound to be selected quickly. Each mode is selected in turn by

pressing the "S.STD" button on the remote controller.

The 4 modes are:

Speech- Designed to reduce the bass and treble which enhances the voice for

News programs.

Theatre- Enables extra bass and treble to enhance the movie experience.

Music- Adjust the sound to best suit music programs.

User - A spare setting that can be adjust to personal tastes.

All the 5 modes can be independently adjusted by using the PICTURE

adjustment menu.

7.Recall (On-screen Display)

The CALL button on the remote controller allows the on screen menu to be

displayed, showing the channel numbers and colour system and sound system.

8.Program scan (Automatically increments/scans the channels and displays

each channel for a short time.)The SCAN button on the remote controller

turns on/off the scan feature.

9.Zoom (changes the picture size format)

Each time the ZOOM button is pressed, the picture size will change. There are

3 size options:

Normal - Used for standard 4:3 picture programs.

16:9 - Automatically reduces the height so that the TV set displays wide

screen type image.

Enlarged - Zooms the picture in to magnify smaller images.

10.Channel swap (toggles between the last channel view and the current

channel)

Each time the SWAP button is pressed, the last channel view is displayed.

GENERAL OPERATION

11.AV input selection

Each time the TV/AV button is pressed, the input selection will cycle among

TV- AV1- AV2- SVHS- DVD- TV.

Notes: I.AV1 & SVHS share the same AV1 audio input.

Ⅱ.In AV modes the RECALL status display will only display the colour

system.

12.Lock

Press the LOCK button to select Child Lock on/off.

13

VCR (without S-VIDEO terminal)

Y

W R

T

A

UD

I

OU

T

P

O

U

T

VCR (with S-VIDEO terminal)

W R

TO

S

-VI

D

E

O

UTP

U

T

D O TT

O

V

I

E OU

T

PU

B

G

R

o t

T c

o

m

p

o

n

e

n

o

u

t

EXTERNAL CONNECTIONS

Y

Cb

OUT

S-VHS

Cr

IN

VIDEO

L AUDIO R

W

R

DVD(with DVD component)

14

Note: when you use S-VHS terminal, the audio signal will

be input from side AV terminal.

VIDEO

AUDIO-R

AUDIO-L

AUDIO

VIDEO

R

L

To assist in location possible faults use help guide below:

BREAKDOWN PHENOMENON

PICTURE

SOUND

CHECKING

the aerial direction and connection

volume、sound mute

Ensure that the power supply is connected to

the TV set and turned on. Also ensure that the

TV set is not in "Listen Mode" or that the

brightness and contrast are not turned down.

adjust color control

adjust channel again

Colour purity fault which can be caused by moving

the TV set, placing magnets near the TV screen or

turning on/off house hold appliances such as

vacuum cleaners near the TV set. Turn the TV off

with the mains power switch for 15 minutes.

When the power is turn on again the TV set will

automatically degauss the picture. In server cases

leave the TV set turned off over night.

Picture with Snow

Noise

Color Spot

Normal Volume

Scramble

Normal or Weak Volume

No Color

Normal Volume

No Picture

No Sound

Normal

Disturb

Noise

Double or Triple Image

Note:

1.If the fault can not be repaired by using above guide consult with your local authorized service center.

2.The TV set must only be repaired by a qualified registered service person. Never attempt

to remove the back cover as the TV set has dangerous voltages in side that may cause a fatality or fire.

3.The cabinet may produce the occasional "snapping sound" This is normal and caused by

the materials in the cabinet expanding with room temperature changes.

TROUBLESHOOTING GUIDE

Electrical interference which can be caused by

cars, motorbikes etc, fluorescent lamps and

dirty insulators on overhead power cables.

This is called ghosting which can be minimized

with an outside aerial, and good quality cable

and terminations. Altering the aerial direction

can also minimize this effect.

15

Haier 34P9A Operating Instructions Manual

Haier 34P9A Operating Instructions Manual

Related papers

Other documents