Motorola MBP75SN User manual

USER’S GUIDE

CARE+

3-in-1 smart non-contact baby thermometer

Model: MBP75SN

The features described in this User’s Guide are subject to modifications without prior notice.

Welcome…

to your new Motorola CARE+ 3-in-1 smart non-contact baby

thermometer!

The thermometer has been carefully developed to make accurate, safe, fast

and contact-free human body temperature measurements at a distance

of not more than 3cm (or 1 inch) on the forehead and object temperature

measurements.

The reference body site is “core” and the mode of operation is “adjusted

mode”. The device is a non-sterile, reusable clinical thermometer intended

for the intermittent determination of human body temperature in “Non-

Contact” mode, using the center of the forehead as the measurement

site for people of all ages. The operator can measure and change battery

under normal circumstances and maintain the device and its accessories in

accordance with the user manual. Operators can take others’ as well as their

own temperature.

Please keep your original dated sales receipt for your records. For warranty

service of your Motorola product, you will need to provide a copy of your

dated sales receipt to confirm warranty status. Registration is not required

for warranty coverage. For product-related questions, please call:

Live Chat: motorolastore.support/en

E-mail: support@motorolastore.com

On the Web: www.motorolastore.com/support

This User’s Guide has all the information you need to make the most out of

your product. Please read this instruction manual carefully before using your

forehead thermometer.

Inside the Box

• 1 x Non-Contact Baby Thermometer

• 2 x 1.5V AAA size alkaline batteries

• 1 x Quick Start Guide

Overview of the Thermometer

1

2

3

54

6

8

7

9

1. LCD Display

2. LED Indicator

3. Power and Measure Button

4. Forehead/Object Button

5. Memory Button

6. Infrared Sensor

7. Distance Sensor

8. Buzzer

9. Battery Cover

Description of LCD Display

Digital readout

Measuring in process

Silent Mode

Forehead Mode

Object (Liquid or Food) Mode

Celsius

Fahrenheit

Low battery indicator

Smiley face (measurement is lower than 38°C/

100.4°F)

Frowning face (measurement equals to or is

higher than 38°C/ 100.4°F)

Memory Symbol and sets of records

Distance detection

4 Table of contents

TABLE OF CONTENTS

1. IMPORTANT SAFETY INFORMATION ...............................................................5

2. INFLUENCES ON BODY TEMPERATURE ........................................................ 7

3. PRIOR TO USE ................................................................................................................ 8

4. TEMPERATURE LED INDICATION .......................................................................9

5. MEASURING MODES ..................................................................................................9

6. TEMPERATURE TAKING HINTS ..........................................................................10

7. HOW TO MEASURE FOREHEAD TEMPERATURE .....................................11

8. HOW TO MEASURE OBJECT (LIQUID/FOOD) TEMPERATURE ..... 12

9. CHECK THE MEMORY .............................................................................................. 12

10. REPLACING THE BATTERY ................................................................................... 13

11. CELSIUS/FAHRENHEIT OPTION ........................................................................ 13

12. SETTING UP THE SMART THERMOMETER WITH THE HUBBLE

CONNECTED APP ...................................................................................................... 14

13. CARE AND CLEANING ............................................................................................ 18

14. CLINICAL ACCURACY VALIDATION METHOD .......................................... 18

15. TROUBLESHOOTING ................................................................................................ 19

16. EXPLANATION OF SYMBOLS ............................................................................. 21

17. DISPOSAL OF THE DEVICE (ENVIRONMENT) ........................................ 22

18. DESCRIPTION OF THE WIRELESS FUNCTIONS AND

TECHNOLOGY ............................................................................................................. 23

19. IMPORTANT INFORMATION REGARDING ELECTROMAGNETIC

COMPATIBILITY(EMC) ............................................................................................ 25

20. GENERAL INFORMATIONS .................................................................................. 27

21. FCC AND IC REGULATIONS

(FCC PART 15) .............................................................................................................. 31

22. SPECIFICATIONS ....................................................................................................... 32

ENGLISH

Important Safety Information 5

1. IMPORTANT SAFETY INFORMATION

To obtain an accurate measurement, please read this manual carefully prior

to use.

• Use of this thermometer is not intended as a substitute for

consultation with your physician.

• Measurement results are for reference only. Contact your physician if

you experience or suspect any health concerns.

• The infrared sensor must be completely clean, dry and undamaged

to ensure accurate measurements.

• Do not touch or blow on the infrared sensor. A dirty infrared sensor

may produce inaccurate readings.

• If the temperature of the storage area differs greatly from that of the

measuring area, please wait until the thermometer temperature has

equalised to the room temperature, about 30 minutes, prior to use.

• Keep the device out of the reach of children and pets to avoid

inhalation or swallowing of small parts. Children may not be able

to use the device in accordance with the instructions. Do not allow

children to take their temperatures unattended. This device must be

used in accordance with the user manual and is not a toy.

• Do not dispose of disposable batteries by fire. Doing so may cause

batteries to explode.

• Do not store the thermometer under extreme temperature (below

-20°C/-4°F or over 55°C/131°F) or extreme humidity conditions

(below 15% RH or over 90% RH). Failure to store device under proper

conditions may cause inaccurate readings.

• Do not use the thermometer if the device is damaged (for example, if

the infrared sensor is broken). Continued use of a damaged unit may

cause injury, inaccurate results or serious hazard.

• Do not disassemble, repair or change any parts of the unit.

• If your thermometer will not be used for a long time, remove battery

to prevent possible damage caused by chemical leakage.

• If the battery is leaking, remove it carefully. Do not allow the leaking

fluid to touch your bare skin.

6 Important Safety Information

• Use of this product requires special precautions regarding

electromagnetic compatibility (EMC). It must be installed and put

into service in accordance with the EMC information provided. This

unit can be affected by portable and mobile RF communications

equipment.

• During use, the operator shall prevent simultaneous contact between

the battery and the patient.

• All materials (e.g. ABS) intended to come into contact with patients

have passed the ISO 10993-5 and ISO 10993-10 standards test,

whereby they are non-toxic and non-allergenic, and do not produce

irritation reactions. However, the state of current scientific knowledge

and technology being incomplete, other potential allergic reactions

may not yet be known. Should you have an allergic reaction, please

stop using the product immediately and consult your physician.

• Store the thermometer in a dry, clean place. Do not expose the

product to chemical solvents, lint, dust, direct sunshine or high

temperature.

• Do not maintain or service the device while it is in use.

• Should you experience any problems with this device (e.g. set-up,

maintenance or use), please contact Motorola customer service or

your local retailer.

• Should any unexpected operations or events occur, please report

them to the manufacturer.

Caution:

This device should not be used adjacent to or stacked with other

equipment. Should adjacent or stacked use be necessary, this device

should be observed to ensure normal operation in the conﬁguration in

which it will be used.

ENGLISH

Inﬂuences On Body Temperature 7

2. INFLUENCES ON BODY TEMPERATURE

• A person’s individual metabolism

• Age

Body temperature is higher in babies and toddlers than in adults.

Greater temperature fluctuations occur faster and more often in

children. Normal body temperature decreases with age.

• Clothing

• Outside temperature

• Time of day

Body temperature is lower in the morning and increases throughout

the day towards evening.

• Activities

Physical and, to a lesser extent, mental activities increase body

temperature.

This is why we recommend that you practise using the thermometer

on yourself and family members when you are healthy. By doing so,

you will know how the thermometer works and will feel more confident

regarding the temperature readings you take when a family member is

not feeling well.

8 Prior To Use

3. PRIOR TO USE

• The key to obtaining accurate readings is a clean sensor. To clean

the sensor, use a cotton swab slightly moistened with alcohol to

gently wipe its surface, and then immediately wipe dry using a clean

cotton swab. Wait at least 20 minutes to make sure that the sensor is

completely dry before taking temperature.

• Skin surface lipids on the forehead may cause an inaccurate

measurement, so make sure the forehead is clean. If you clean the

forehead, please keep waiting a further 5 to 10 minutes before

measuring.

• If the temperature of the storage area differs greatly from that of the

measuring area, please wait until the thermometer temperature has

equalized to the room temperature, about 30 minutes, prior to use.

• Gently slide the battery cover back and install 2 x 1.5V AAA size

alkaline batteries (which can be found inside the packaging)

according to the proper polarity, slide the battery cover back, press

the

button to turn the thermometer on.

ENGLISH

Temperature Led Indication 9

4. TEMPERATURE LED INDICATION

LED indications:

Light Off: 34.0°C (93.2°F) to 37.9°C (100.3°F) = Normal Temperature

Red LED: 38.0°C (100.4°F) to 42.9°C (109.3°F) = High Temperature

5. MEASURING MODES

1. When it is on, press the button to switch different scan modes.

There are 4 kinds of mode which including Forehead

, Object

,

Forehead/Silent

and Object/Silent

modes.

2. The device beep tone will be muted when Forehead/ Silent

or

Object/ Silent

Mode is selected, the

symbol will appear on

the LCD for indicating the Silent Mode is activated.

F F FF

Note: each key press will send a key tone to conﬁrm the setting is

activated. (Except both the two Silent modes)

10 Temperature Taking Hints

6. TEMPERATURE TAKING HINTS

1. External factors may influence forehead temperature. Specific

external factors include:

• Attempting to take temperature reading from sites on the body other

than the forehead may produce inaccurate results.

• Exposure to very hot or very cold foods.

• Recent swimming or bathing.

• Having their forehead covered.

• In these cases, remove individual from the above situation or

environment and have them remain in a normal room temperature

environment for 30 minutes before taking a temperature.

2. In “object (liquid/food) measurement mode”, the current surface

temperature of the object is displayed. This may be different from

its internal temperature, especially if its surface is exposed to direct

sunlight or a draft.

3. Temperature taken while asleep is lower hence should not compare

directly with readings taken while awake.

4. Temperatures measured using different thermometers should

never be compared to each other. Tell your doctor what type of

thermometer you used to take your temperature and on which part

of the body.

Note:

Holding the thermometer for too long in the hand before taking a

measurement may cause the device to warm up. This means the

measurement could be incorrect.

ENGLISH

How To Measure Forehead Temperature 11

7. HOW TO MEASURE FOREHEAD

TEMPERATURE

Make sure the probe is clean before measuring.

1. Press the

button to power on the thermometer. When the device is

ready, ‘ - - ’ will appear on the screen.

2. Ensure that the thermometer is in Forehead Mode; the Forehead

symbol

will be on the display.

3. Position the thermometer not more than 3cm (or 1 inch) from the

center of the forehead with the sensor aimed between the eyebrows.

3cm (or 1 inch)

4. Press once the button.

5. When the measurement is completed, it will end with a confirmation tone.

6. If the temperature measurement is below 38

0

C/100.4

0

F, a symbol

will be appeared on display. If the reading is 38

0

C/100.4

0

F or above,

symbol will be appeared on display.

7. About 30 seconds after use, the thermometer will automatically beep

and shut off.

High Temperature Alarm:

Only in Forehead

Mode and Forehead/Silent

Mode

Note:

• When taking a patient’s temperature, ensure that the thermometer is

in Forehead Mode; the

symbol appear on the display.

• If the skin is covered with hair, sweat, or dirt, clean the area and wait

10 minutes before taking a measurement.

• Ensure that the thermometer is held ﬁrmly during measurement and

that the patient does not move until the measurement is complete.

Movement can impact the measurement.

12 How To Measure Object (liquid/food) Temperature

8. HOW TO MEASURE OBJECT (LIQUID/

FOOD) TEMPERATURE

1. Press the button to turn the thermometer on. All symbols on the

display will momentarily appear.

2. Ensure that the thermometer is in Object Mode; the Object

symbol will be on the display.

3. Position the thermometer about 3cm (or 1 inch) from the object.

3cm (or 1 inch)

4. Press once the button and the temperature reading will be

displayed.

5. About 30 seconds after use, the thermometer will automatically beep

and shut off.

9. CHECK THE MEMORY

The device stores up to 10 measurements which you can share with

physician or trained healthcare professional.

1. When the device is on, press once the

button, then press again to

show the last measurement.

2. The

symbol or symbol will appear together with each

measurement for representing body or object temperature reading.

3. Press each to proceed to next reading.

4. To clear all the memory, press and hold

button for more than 3

seconds until you see “- -” on display and hear the beep.

Note: Both Forehead or Object records will all be cleared.

ENGLISH

Replacing The Battery 13

10. REPLACING THE BATTERY

Low battery warning:

When the battery power becomes low, the low battery symbol will

appear on the display. The thermometer can still be used during

this time, but the batteries should be replaced as soon as possible.

If the batteries run out completely, “Lo” will be displayed along with

the low battery symbol. In this case, the batteries will need to be

replaced before using the thermometer again.

Replacing the Battery:

1. Gently remove the battery cover.

2. Carefully remove the old batteries and

properly discard.

3. Insert new batteries (2 x 1.5V AAA size

alkaline batteries) according to the

proper polarity.

4. Slide the battery cover back until it

snaps in place.

Note:

1. Please properly dispose of the batteries away from small children and

heat.

2. It is recommended to remove the batteries if the unit will not be used

for an extended period of time.

3. For long durations of non-operation, please remove all batteries from

the device.

4. Batteries must be disposed of in accordance with local environmental

and institutional policies.

5. Dispose of used batteries in accordance with the applicable legal

regulations. Never dispose of batteries in the normal household

waste.

11. CELSIUS/FAHRENHEIT OPTION

In standby mode, you can switch between Celsius (°C) and

Fahrenheit (°F) by pressing and holding the Forehead/Object

and

Memory

buttons at the same time.

14 Setting Up The Smart Thermometer With The Hubble Connected App

12. SETTING UP THE SMART THERMOMETER

WITH THE HUBBLE CONNECTED APP

Please take note of the following minimum system requirements:

Smartphones/Tablets: iOS 10.0, Android™ 7.0

12.1 Download Hubble Connected App

• Scan the QR code with your smart

device and download Hubble Connected

App from the App Store for iOS devices

or from the Google Play™ Store for

Android™ devices.

• Install Hubble Connected App on your

device.

12.2 Sign up with Hubble on your smart device

• Turn on Bluetooth on your compatible smartphone or tablet.

• Open the Hubble Connected App on your compatible

smartphone or tablet (fig. 1), read through the Privacy Policy,

Terms and Conditions, by signing up you agree to our terms of

service before tap Done (fig. 2), enter your account information

to sign up with Hubble.

Note:

If you already have a Hubble App account, please tap Log in with

Hubble to go to the next steps.

fig. 1 fig. 2

ENGLISH

Setting Up The Smart Thermometer With The Hubble Connected App 15

12.3 Add the smart thermometer to your account

• Log in your Hubble Account by entering “User Name” and

“Password” (fig. 3).

• Tap

on the screen of your device to add smart thermometer

(fig. 4)

fig. 3 fig. 4

• To select your device for setting up by tapping Baby wellness

(fig. 5).

• Tap MBP75SN to add the new thermometer (fig. 6) .

fig. 5 fig. 6

16 Setting Up The Smart Thermometer With The Hubble Connected App

• The following setup instructions will appear on the screen, press

and hold the

button to turn the pairing mode on (fig. 7).

• Tap Continue.

fig. 7

• Your

compatible divice will seach and connect the thermometer

automatically

(fig. 8)

• Creare New Profile for your lovely baby and confirm by Done.

fig. 8

ENGLISH

Setting Up The Smart Thermometer With The Hubble Connected App 17

• The thermometer setup has been successfully completed (fig. 9).

fig. 9

*

Follow the on app instructions to experience other features.

18 Care And Cleaning

13. CARE AND CLEANING

To ensure accurate measurements, it is very important to keep the

infrared sensor clean and free of scratches. Fingerprints and dirt will

affect the accuracy of the thermometer. In order to get an accurate

measurement, please clean the infrared sensor. Gently wipe its surface

with a cotton swab slightly moistened with alcohol and immediately

wipe dry with a clean cotton swab.

Use a soft dry cloth to clean the body of the thermometer. Never clean

the thermometer using an abrasive cleanser, thinner or benzene, nor

immerse the thermometer in water or other liquids. After cleaning,

place the thermometer in its protective case. Store it in a clean, dry

place at room temperature. Never expose the thermometer to extreme

temperatures, humidity, direct sunlight or shock.

• Clean the measuring sensor after each use. Use a clean cloth or

cotton bud that can be moistened with 75% alcohol.

• To clean the entire device, please use a soft cloth

slightly moistened with a mild soapy solution. Under no

circumstances may liquid enter the device. Do not use the device

again until it is completely dry.

14. CLINICAL ACCURACY VALIDATION

METHOD

This device is an adjusted mode clinical thermometer the validated

information for clinical accuracy in each adjusted mode are:

GroupA1: ∆cb=-0.01

0

C, LA=0.18, r=±0.08

0

C

GroupA2: ∆cb= 0.06

0

C, LA=0.22, r=±0.08

0

C

GroupB : ∆cb=-0.01

0

C, LA=0.20, r=±0.07

0

C

GroupC : ∆cb=-0.01

0

C, LA=0.18, r=±0.07

0

C

∆cb : CLINICAL BIAS

L

A

: LlMITS OF AGREEMENT

r : CLINICAL REPEATABILITY

ENGLISH

Troubleshooting 19

15. TROUBLESHOOTING

When a malfunction or incorrect temperature measurement occurs, an

error message will appear as described below.

LCD Display Display Solution

The temperature

measured is higher than

1. Forehead thermometer

mode: 43

0

C (109.4

0

F).

2. Object temperature

mode: 100

0

C (212.0

0

F).

Operate the thermometer

only between the speciﬁed

temperature ranges.

If necessary, clean the

sensor tip. In the event of

a repeated error message,

contact your retailer or

Customer Services.

The temperature

measured is lower than

34

0

C (93.2

0

F).

The operating

temperature is not in

the range 16

0

C~40

0

C

(60.8

0

F~104

0

F).

Operate the thermometer

only between the speciﬁed

temperature ranges.

20 Troubleshooting

Problem Category Problem Description/

Error

Solution

Inaccurate

measurement or

where there is any

doubt regarding the

measured reading.

Please check whether

the infrared sensor is

clean.

Clean the infrared

sensor with a cotton

swab in accordance

with the user manual.

Please check if the

proper measurement

method was used.

Ensure that you have

read the manual and

know how to use

the thermometer

properly.

Inaccurate

measurement or

where there is any

doubt regarding the

measured reading.

Please check if you

have allowed the

thermometer and

patient to stabilize in

the room for at least

30 minutes.

Please keep the

thermometer

and patient in the

measuring room at

least 30 minutes prior

to use.

Are you using the

thermometer indoors?

Please ensure that

you take temperature

indoors.

Please check if

you have held the

thermometer in your

hand for too long,

thus aecting its

accuracy.

Put the thermometer

on a table in the

room where the

measurement is being

taken and let it cool

down before using it.

The app can

,

t connect

to the device.

The Bluetooth

connection failed

Restart the device and

the app.

The app can

,

t control

the device, but the

app is connected to it.

Bluetooth

communications

failed.

Restart the app, and

then re-connect the

device.

Page is loading ...

Motorola MBP75SN User manual

This manual is also suitable for

Motorola MBP75SN User manual

Related papers

Other documents