2. Troy-Bilt
  3. 13YX79KT211
13YX79KT211

Troy-Bilt 13YX79KT211, 13BX79KT011, 13WX79KT011, 13WX79KT211, 13YX79KT011 Fast Start Guide

  • Hello! I am an AI chatbot trained to assist you with the Troy-Bilt 13YX79KT211 Fast Start Guide. I’ve already reviewed the document and can help you find the information you need or explain it in simple terms. Just ask your questions, and providing more details will help me assist you more effectively!
  • What are the tools required to assemble the product?
    Where should the steering wheel be positioned?
    How do I secure the steering wheel?
    How do I attach the battery cables?
    What should be done after assembling the product?
    Where can I find help if I need it?
778-12000B© 2013 13WX79K
Attach the red cable to the positive (+) battery
terminal and attach the black cable to the
negative (–) battery terminal with the bolts and
hex nuts.
Position the red rubber boot over the
positive battery terminal.
Remove the shipping brace from the
discharge opening by grasping it
between your thumb and index finger
and rotating it clockwise.
Speed
Control
Lever
Tools Required:
• /-inch wrench (or adjustable wrench)
• ⁄-inch wrench (or adjustable wrench)
• /-inch socket wrench
PTO (Blade
Engage) Lever
Throttle
Control
Ignition
Switch
Brake
Pedal
1. With the wheels of the tractor pointing straight
forward, place the steering wheel
over the steering shaft.
2. Secure the steering wheel
with the washer (cupped side
down) and hex bolt.
3. Push the steering wheel cap
down until it “clicks” into place.
1. Remove the knob from the base
of the seat.
2. Position the seat over the seat pan,
with the two forward seat mount tabs
fitting into the provided grooves.
3. Slide the seat rearward and align the center
mounting hole in the seat with the slot in the
seat pan and secure the seat with the knob.
1
3
2
4
READ AND UNDERSTAND ALL INSTRUCTION, WARNING, AND DANGER LABELS.
PARA INSTRUCCIONES EN ESPAÑOL, REFIÉRASE AL MANUAL DEL OPERADOR.
IMPORTANT: READ OPERATOR'S MANUAL AND ENGINE MANUAL THOROUGHLY AND
FOLLOW THE IMPORTANT SAFE OPERATION PRACTICES BEFORE OPERATING .
Need Help? Call 1-888-TO-HELP-U
Insert the ignition key and turn it to the Start
position.
Release the key into the Normal Mowing position
after the engine starts.
778-12000B© 2013 13WX79K
Note: Steering Wheel not shown for clarity.
Fill fuel tank with clean, fresh gasoline.
Do not fill above the base of fuel tank neck.
Place PTO (Blade Engage) Lever in Off position.
Move the throttle control
into the Choke position
Move Throttle to Fast position.
Place Speed Control Lever
in N (neutral) position.
Fully depress the Brake Pedal.
Speed
Control
Lever
PTO (Blade
Engage) Lever
Throttle
Control
Ignition
Switch
Brake
Pedal
FAST
SLOW
FAST
SLOW
5
8
6
9
7
10
READ AND UNDERSTAND ALL INSTRUCTION, WARNING, AND DANGER LABELS.
PARA INSTRUCCIONES EN ESPAÑOL, REFIÉRASE AL MANUAL DEL OPERADOR.
IMPORTANT: READ OPERATOR'S MANUAL AND ENGINE MANUAL THOROUGHLY
AND FOLLOW THE IMPORTANT SAFE OPERATION PRACTICES BEFORE OPERATING .
Need Help? Call 1-888-TO-HELP-U
/