Siemens DTNF364R Specification

Siemens
Brand
Siemens
Model
DTNF364R
Type
Specification

This manual is also suitable for

Siemens DTNF364R is a heavy-duty double throw safety switch that offers a range of features and capabilities for various electrical applications. With a maximum AC voltage of 600 volts, it is suitable for use in both residential and commercial settings. The switch is UL listed and meets UL98 and UL50 standards for safety and reliability. It also complies with NEMA Standard KS-1 for enclosed switches and meets NEC wire bending space requirements.

One of the key features of the Siemens DTNF364R is its quick-make and break switching action, which ensures fast and reliable operation. The visible blade and double break construction provide clear indication of the switch's status and enhance safety during maintenance. The highly visible ON/OFF indication allows for easy identification of the switch's position.

Siemens DTNF364R is a heavy-duty double throw safety switch that offers a range of features and capabilities for various electrical applications. With a maximum AC voltage of 600 volts, it is suitable for use in both residential and commercial settings. The switch is UL listed and meets UL98 and UL50 standards for safety and reliability. It also complies with NEMA Standard KS-1 for enclosed switches and meets NEC wire bending space requirements.

One of the key features of the Siemens DTNF364R is its quick-make and break switching action, which ensures fast and reliable operation. The visible blade and double break construction provide clear indication of the switch's status and enhance safety during maintenance. The highly visible ON/OFF indication allows for easy identification of the switch's position.

Product Specification Sheet HD200.8
Answers for industry.
Heavy and General Duty Double
Throw Safety Switch
Type VBII, 200 Amp, Type 3R (Outdoor)
Standards and Ratings
• UL Listed under file #E4776
• Meets UL98 for switches and UL50
for enclosures
• Suitable for use as Transfer
Equipment on optional standby
systems as defined by Article 702
of the NEC
• Meets NEMA Standard KS-1 for
enclosed switches (Type HD)
• Meets NEC wire bending space
requirements
• Suitable for use as service equipment
• AIC Ratings
Gener
al Duty 10,000 AIC when
protected by Class H or 100,000 AIC
when protected by Class R, J or T
fuses (fuse ampere rating must not
exceed switch ampere rating)
Hea
vy Duty 10,000 AIC with Class H
or 200,000 AIC when used with or
protected by Class R, J or T fuses
(fuse ampere rating must not exceed
switch ampere rating)
Features
• Quick-make and break
switching action
• Visible blade, double break
construction
• Highly visible ON/OFF indication
• Modular design allows quick and
easy replacement of parts
• Front removable lugs which can
easily be converted to copper body
or compression type lugs
• Defeatable dual cover interlock
• All copper current carrying parts
1
• Tangential knockouts
• Handle is padlockable in OFF position
1
Lugs are aluminum alloy as standard. Optional copper body lugs are available.
2
Fusible switches accept: Class H fuses as standard or Class R or T fuses with kit, Class J fuses
(move load base).
Catalog Max Shipping
Number AC Volts Description Weight (lbs.)
General Duty
DTGNF224R 240 Non-fusible, 2 Pole, 2 Wire 81
DTGNF224NR 240 Non-fusible, 2 Pole, 3 Wire 82
DTGNF324R 240 Non-fusible, 3 Pole, 3 Wire 84
DTGNF324NR 240 Non-fusible, 3 Pole, 4 Wire 85
Heavy Duty
DTF224R
2
240 Fusible, 2 Pole, 2 Wire 91
DTF324R
2
240 Fusible, 3 Pole, 3 Wire 94
DTF364R
2
600 Fusible, 3 Pole, 3 Wire 94
DTNF224R 240 Non-fusible, 2 Pole, 2 Wire 81
DTNF324R 240 Non-fusible, 3 Pole, 3 Wire 84
DTNF364R 600 Non-fusible, 3 Pole, 3 Wire 84
General Information
Mechanical Lug Wire Ranges (75°C, Cu/Al)
Description Wire Range
Line, Load
#6-250 kcmil
Neutral
Ground #14-4 AWG
Product Specification Sheet #HD200.8 (page 2 of 3)
Catalog
240V 1Ø 240V 3Ø 480V 3Ø 600V 3Ø 250V DC
Number Std Max Std Max Std Max Std Max Std Max
General Duty
DFGNF224R — 15 — 60 — — — — — 40
DFGNF224NR — 15 — 60 — — — — — 40
DFGNF324R — 15 — 60 — — — — — 40
DFGNF324NR — 15 — 60 — — — — — 40
Heavy Duty
DTF224R 15 — 25 60 — — — — 40 —
DTF324R 15 — 25 60 — — — — 40 —
DTF364R 15 — 25 60 50 125 60 150 40 —
DTNF224R — 15 — 60 — — — — — 40
DTNF324R — 15 — 60 — — — — — 40
DTNF364R — 15 — 60 — 125 — 150 — 40
Horsepower Ratings
1
Accessories
Catalog Number Description
Replacement Parts
Catalog Number Description
HBB64 Fusible Load Side Replacement Base (2) kits required per switch
HFB64 Fusible Line Side Replacement Base (2) kits required per switch
HNB64 Non-fusible Replacement Line Base (2) kits required per switch
HHD61234 Replacement Handle/Handle Guard
HL64 Replacement Lugs (3 lugs per kit)
HM64 Replacement Mechanism
2
3
Replacement Door
General & Heavy Duty Double Throw Switches
HG61234 Equipment Ground Lug Kit
HG261234 Isolated Equipment Ground Lug Kit
HNC264 Neutral Kit
HS200 2.00” Type “HS” Outdoor Hub
HS250 2.50” Type “HS” Outdoor Hub
Heavy Duty Double Throw Switches Only
HA161234 Auxiliary Switch (1-NO & 1 NC)
2
HA261234 Auxiliary Switch (2-NO & 2 NC)
2
HA361234 Low Voltage Auxiliary Switch
2
HR64 Class R Fuse Clip Kit (3 fuse clips per kit, (2) kits required per switch)
HLC64 Copper Lug Kit (9 lugs per kit)
2
HT24 300V Class T Kit (2) required per pole
HT64 600V Class T Kit (2) required per pole
1
Dual horse ratings: Std - applies when non-time delay fuses are installed.
Max - applies when time-delay fuses are installed.
2
(2) required per switch (one for each of the two line bases).
3
Catalog number is same as switch catalog number plus “DOOR” suffix.
Product Specification Sheet #HD200.8 (page 3 of 3)
Compression Lugs (UL listed for field installation) Dimensions and Wire Bending Space
Wire
Burndy Thomas-Betts IIsco
Size CU ONLY CU/AL CU ONLY CU/AL CU ONLY CU/AL
YA2C-L BOX YA2CA1 54142-TB 60117 CRB-2 IACL-2
#2
YA2C CRB-2L ACN-2
YA1C-L BOX YA1CA1 54147 60123 CRA-1-38 ACN-1
#1
YA1C 54947BE CRA-1L
1/0
YA25-L BOX YA25A1 54153-TB 60129 CRA-0 IACL-1/0
YA25 54949BE 61130 CRA-1/0L ACN-1/0
YA26-L3 YA26A6 54158 60135 CRA-2/0 ACL-2/0
2/0 YA26 256-30695-1229 61136 CRA-2/0L IACL-2/0
54910BE
3/0
YA27-L3 YA27A1 54163-TB 60141 CRC-3/0 IACL-3/0
YA27 61142 CRB-3/0L ACL-3/0
4/0
YA28-L3 YA28A1 54168 61148 CRC-4/0 IACL-4/0
YA28-TC38 256-30695-1253 60147 CRB-4/0L ACL-4/0
250 YA29-L7 54173 61156 CRA-250
Kcmil 54913BE
2.50 (89)
C
L
(6) .44" (11) diameter
mounting holes
(2) knockouts in back and
(1) in each side for 1 1/4,
1 1/2, 2, 2 1/2" conduit
.55 (14)
6.84
(174)
5.73
(146)
C
2.45
(62)
6.42
(163)
.82 (21)
.25(6)
2.63
(67)
16.44
(418)
.80 (20)
A
(OD Box
Less Cover)
4.50
(114)
7.50
(191)
7.50
(191)
B
21.20
(538)
C
L
4.50
(114)
4.56
(116)
.87
(22)
4.88
(124)
19.12
(486)
1.69 (43)
(4) knockouts
for 1 1/4,
1 1/2, 2,
2 1/2"conduit
4.50
(114)
4.88
(124)
2.44
(62)
2.44
(62)
(2) knockouts
for 1/2"
conduit
C
L
2.09 (53)
Provision for HS
Type 3R Hub
Catalog
Dimensions Wire Bending Space
Number A B C Top Bottom
DTGNF224R
DTGNF224NR
DTGNF324R
36.00 31.00 36.66
DTGNF324NR
DTNF224R
(914) (787) (931) 7.50 7.50
DTNF324R
DTNF364R
DTF224R
49.48 44.50 50.13
10.00
DTF324R
(1257) (1130) (1273)
7.50 10.00
DTF364R
7.50
Dimension Drawing
Dimensions shown in inches and millimeters ( ).
Dimension shown accurate to
+
¹⁄₈ inch.
Enclosure: Galvanized Steel .060 (16 Gauge)
Finish – ANSI Grey #61 Paint
Siemens is a registered trademark of Siemens AG. Product names
mentioned may be trademarks or registered trademarks of their
respective copanies. Specifications subject to change without notice.
www.usa.siemens.com/switches
Siemens Industry, Inc.
Building Technologies Division
5400 Triangle Parkway
Norcross, GA 30092
1-800-964-4114
Subject to change without prior notice
All rights reserved
Printed in USA
© 2009 Siemens Industry, Inc.
  • Page 1 1
  • Page 2 2
  • Page 3 3

Siemens DTNF364R Specification

Siemens
Brand
Siemens
Model
DTNF364R
Type
Specification
This manual is also suitable for

Siemens DTNF364R is a heavy-duty double throw safety switch that offers a range of features and capabilities for various electrical applications. With a maximum AC voltage of 600 volts, it is suitable for use in both residential and commercial settings. The switch is UL listed and meets UL98 and UL50 standards for safety and reliability. It also complies with NEMA Standard KS-1 for enclosed switches and meets NEC wire bending space requirements.

One of the key features of the Siemens DTNF364R is its quick-make and break switching action, which ensures fast and reliable operation. The visible blade and double break construction provide clear indication of the switch's status and enhance safety during maintenance. The highly visible ON/OFF indication allows for easy identification of the switch's position.

Download PDF
report

Ask a question and I''ll find the answer in the document

Finding information in a document is now easier with AI

Related papers

Other documents