American Standard 2764014M202.011 Spec sheet

Type
Spec sheet
H1b-1
© 2019 AS America Inc.
SEE REVERSE SIDE FOR ROUGHING-IN DIMENSIONS
AND PRODUCT SPECIFICATIONS
Cadet Freestanding Tub
2764.014M202 CADET FREESTANDING TUB KIT
Product Features:
Sleek contemporary styling
High-gloss acrylic 2-piece construction with
berglass reinforcement
• Soaking tub with extra deep bathing well
Wide accessory storage deck
• Overow cover and drain included
Complete tub kit - Chrome Freestanding tub ller
with hand spray
Pre-leveled tub bottom
• Limited Lifetime warranty
2764.014 CADET FREESTANDING TUB KIT
LESS TUB FILLER
Same as above except does not include chrome
oor-mounted tub ller with hand spray
2764.014M203 CADET FREESTANDING TUB KIT
Same as M202 except with Brushed Nickel nish
oor-mounted tub ller with hand spray and
drain/overow
2764.014M204 CADET FREESTANDING TUB
KIT LESS TUB FILLER
Same as M203 except does not include Brushed
Nickel nish oor-mounted tub ller with hand spray
Nominal Dimensions:
66" x 32" x 23" (tub only)
(1676 x 813 x 584mm)
Installed size with ller:
66" x 42" min. x 23"
(1676 x 1067 min. x 584mm)
Compliance Certications -
Meets or Exceeds the Following Specications:
• CSA B45.5 / IAPMO Z124
spec_2764.014M202 Cadet Freestanding Tub Rev. 5 7/19
Cadet
®
Freestanding Tub
HIGH GLOSS ACRYLIC
To Be Specied - Required:
Color: Arctic White
Optional Components:
Universal Bathtub Drain: 1583.470 (specify nish)
Deep Soak Bathtub Drain: 1640.305 (specify nish)
H1b-2
© 2019 AS America Inc.
Cadet
®
Freestanding Tub
HIGH GLOSS ACRYLIC
spec_2764.014M202 Cadet Freestanding Tub Rev. 5 7/19
NOTES:
REFER TO INSTALLATION INSTRUCTIONS SUPPLIED WITH BATHTUB FOR ADDITIONAL INFORMATION.
IMPORTANT: Dimensions of xtures are nominal and may vary within the range of tolerances established by ANSI Standard Z124.1.
These measurements are subject to change or cancellation. No responsibility is assumed for use of superseded or voided leaet.
21-1/2"
(546mm)
1-1/2"
(38mm)
1" (25mm)
FROM INSIDE
EDGE OF COVER
10"
(254mm)
5-5/8"
(143mm)
4-1/16"
(103mm)
43-1/8"
(1095mm)
66"
(1676mm)
32"
(813mm)
FLOOR
CUTOUT
COVER
LOCATION FOR
OPTIONAL FILLER
DRAIN OVERFLOW
66 x 32 x 23 in. (TUB ONLY)
(1676 x 813 x 584mm)
120 Lbs. (54 Kg.)
600 Lbs. (270 Kg.)
58 Gal. (220 L)
47-1/4 x 20-1/2 In. (1200 x 521mm)
56-1/4 x 23-1/4 In. (1429 x 591mm)
14-5/8 In. (371mm)
79 Lbs./Sq.Ft. (386 Kgs./Sq.m)
GENERAL SPECIFICATIONS FOR
2764 FREE STANDING BATH
INSTALLED SIZE
WEIGHT
WEIGHT w/WATER
GAL. TO OVERFLOW
BATHING WELL AT SUMP
BATHING WELL AT RIM
WATER DEPTH TO OVERFLOW
FLOOR LOADING
(PROJECTED AREA)
  • Page 1 1
  • Page 2 2

American Standard 2764014M202.011 Spec sheet

Type
Spec sheet

Ask a question and I''ll find the answer in the document

Finding information in a document is now easier with AI