American Standard 2775002.222 User manual

American Standard
Brand
American Standard
Model
2775002.222
Type
User manual

This manual is also suitable for

American Standard 2775002.222 is a high gloss acrylic whirlpool and bathing pool that offers a luxurious and relaxing bathing experience. It features a 2.0 HP single speed, self-draining pump/motor, and eight multi-directional and flow-adjustable jets, including two Ideal-flow jets, two body massage jets, and four recessed back-rest jets. The deck-mounted air switch provides easy control of the whirlpool system, while the two silent air volume controls allow you to customize the intensity of the massage.

American Standard 2775002.222 is a high gloss acrylic whirlpool and bathing pool that offers a luxurious and relaxing bathing experience. It features a 2.0 HP single speed, self-draining pump/motor, and eight multi-directional and flow-adjustable jets, including two Ideal-flow jets, two body massage jets, and four recessed back-rest jets. The deck-mounted air switch provides easy control of the whirlpool system, while the two silent air volume controls allow you to customize the intensity of the massage.

CADET™ CORNER
WHIRLPOOL & BATHING POOL
HIGH GLOSS ACRYLIC
CADET CORNER WHIRLPOOL & BATHING POOL
❏ 2775.018W Whirlpool featuring System I
• Acrylic with fiberglass reinforcement
• Pre-leveled tub bottom
• Dual, backrest positions
• Molded-in arm rests
• 2.0 HP single speed, self-draining pump/motor
• Factory installed power cord with plug
• Eight multi-directional and flow-adjustable
jets including:
- Two Ideal-flow jets
- Two body massage jets
- Four recessed back-rest jets (two in
each backrest)
• Deck-mounted air switch On/Off
• Two silent air volume controls
• Quick Connect Safe-T-Heater connection
system
• Factory installed and tested whirlpool system
❏ 2775.018WC Stay Clean™ Whirlpool Massage
Featuring System I:
• Same as 2775.018W except with the
StayClean™ whirlpool system featuring
Antimicrobial AlphaSan®
❏ 2775.002 Bathing Pool only
Nominal Dimensions: 2159 x 1524 x 502mm
(85” x 60” x 19-3/4")
© 2003 American Standard Inc.
BV-21
NOTE: Roughing-in dimensions and product
specifications shown on reverse side of page.
Rev. 3/03
Compliance Certifications -
Meets or Exceeds the Following Specifications:
• Underwriters Laboratories - Hydromassage
Bathtubs UL 1795
• ASME A112.19.7M for Whirlpool Appliances
• ANSI Z124.1 for Plastic Bathtubs
• ASTM E162 for Flammability
• NFPA 258 for Smoke Density
To Be Specified - Required:
❏ Color:
❏ Bath Filler: (specify finish)
❏ Bath Drain: 1583.470 (specify finish)
To Be Specified - Optional:
❏ Safe-T-Heater*: 9075.120
❏ Jet Trim Ring Kit: 9860.200-two per kit
(Specify finish)
❏ Universal Tile Bead Kit: 751755-100
❏ Grab Bar Kit: 9822.200-two per kit (specify finish)
For color/finish availability and other faucet choices,
please see the Product Selector and Pricing Guide.
* NOTE: the Safe-T-Heater is designed to maintain water
temperature during operation. It will not heat cold water to
desired bathing temperature.
CADET™ CORNER
WHIRLPOOL & BATHING POOL
HIGH GLOSS ACRYLIC
© 2003 American Standard Inc.
1524mm
(60)
70mm REF.
(2-3/4)
165mm
(6-1/2)
279mm
(11)
RECOMMENDED
FITTING LOCATION
64 X 330mm (2-1/2 X 13)
229 X 305mm
(9 X 12)
CUTOUT IN
FLOOR FOR
DRAIN
ON/OFF
SWITCH
PROVIDE ACCESS
TO PUMP FOR
SERVICING ON ALL
INSTALLATIONS
OUTLINE OF
CUTOUT
2159mm
(85)
1080 mm
(42-1/2)
C/L
1524mm
(60)
1076mm
(42-3/8)
1080mm
(42-1/2)
PUMP
C/L OF
DRAIN OUTLET
1-1/2 O.D. TAILPIECE
LEVELING STRINGER
NOT FOR SUPPORT
70mm
(2-3/4)
117mm
(4-5/8)
1-1/2 N.P.T.M.
THREADS
38 mm REF.
(1-1/2)
C/L OF
OVERFLOW
76mm
(3)
464mm
(18-1/4)
502mm
(19-3/4)
ROUGH
FLOOR
INTEGRAL
SUPPORT
FEET
SAFE-T-
HEATER
REMOVABLE
BLANK
INTEGRAL
FEET
1524mm
(60)
70mm REF.
(2-3/4)
165mm
(6-1/2)
279mm
(11)
RECOMMENDED
FITTING LOCATION
64 X 330mm (2-1/2 X 13)
229 X 305mm
(9 X 12)
CUTOUT IN
FLOOR
FOR
DRAIN
OUTLINE OF
CUTOUT
2159mm
(85)
1080 mm
(42-1/2)
C/L
1524mm
(60)
1076mm
(42-3/8)
C/L OF
DRAIN OUTLET
1-1/2 O.D. TAILPIECE
LEVELING STRINGER
NOT FOR SUPPORT
70mm
(2-3/4)
117mm
(4-5/8)
1-1/2 N.P.T.M.
THREADS
38 mm REF.
(1-1/2)
C/L OF
OVERFLOW
76mm
(3)
464mm
(18-1/4)
502mm
(19-3/4)
ROUGH
FLOOR
85 X 60 X 19-3/4In.(2159 X 1524 X 502mm)
130 Lbs. (59 Kg.)
756 Lbs. (343 Kg.)
75 Gal. (284 L.)
60 Gal. (227 L.)
32 X 32 In. (813 mm X 813 mm)
46 X 46 In. (1168 X 1168mm)
14 In. (356 mm)
34 Lbs./Sq. Ft. (115 Kgs/Sq. m.)
41.7
70.4
GENERAL SPECIFICATIONS FOR 2775 WHIRLPOOL
INSTALLED SIZE
WEIGHT
WEIGHT w/WATER
GAL. TO OVERFLOW
MIN. OPERATING GAL.
BATHING WELL AT SUMP
BATHING WELL AT RIM
WATER DEPTH TO OVERFLOW
FLOOR LOADING
(PROJECTED AREA)
PTS.
CUBE (FT
3
)
WHIRLPOOL ELECTRICAL SPECIFICATIONS
2.1 HP, 14.4 AMPS, 120V.SYSTEM I PUMP
85 X 60 X 19-3/4In.
(2159mm X 1524 mm X 502mm)
105 Lbs. (48 Kg.)
730 Lbs. (328 Kg.)
75 Gal. (284 L.)
32 X 32 In. (813 mm X 813 mm)
46 X 46 In. (1168 X 1168mm)
14 In. (356 mm)
33 Lbs./Sq. Ft. (111 Kgs/Sq. m.)
41.7
70.4
GENERAL SPECIFICATIONS FOR 2775 BATHING POOL
INSTALLED SIZE
WEIGHT
WEIGHT w/WATER
GAL. TO OVERFLOW
BATHING WELL AT SUMP
BATHING WELL AT RIM
WATER DEPTH TO OVERFLOW
FLOOR LOADING
(PROJECTED AREA)
PTS.
CUBE (FT
3
)
NOTES:
BATH CAN BE INSTALLED EITHER ABOVE OR BELOW FLOOR LINE AS PIER, ISLAND, OR PENINSULA
TYPE INSTALLATION. SUMP OF BATH IS SUPPORTED BY INTEGRAL FEET. NO ADDITIONAL SUPPORT
REQUIRED. ENCLOSING MATERIAL BY OTHERS.
REFER TO INSTALLATION INSTRUCTIONS SUPPLIED WITH WHIRLPOOL FOR ADDITIONAL
INFORMATION.
OPTIONAL 2 WALL TILING BEAD KIT AVAILABLE AND MUST BE ORDERED SEPARATELY.
FITTINGS NOT INCLUDED AND MUST BE ORDERED SEPARATELY.
PROVIDE SUITABLE REINFORCEMENT FOR ALL SUPPORTS.
IMPORTANT:
Dimensions of fixtures are nominal and may vary within the range of tolerances established by ANSI
Standard Z124.1/A112.19.7M.
These measurements are subject to change or cancellation. No responsibility is assumed for use of
superseded or voided leaflet.
■
  • Page 1 1
  • Page 2 2

American Standard 2775002.222 User manual

American Standard
Brand
American Standard
Model
2775002.222
Type
User manual
This manual is also suitable for

American Standard 2775002.222 is a high gloss acrylic whirlpool and bathing pool that offers a luxurious and relaxing bathing experience. It features a 2.0 HP single speed, self-draining pump/motor, and eight multi-directional and flow-adjustable jets, including two Ideal-flow jets, two body massage jets, and four recessed back-rest jets. The deck-mounted air switch provides easy control of the whirlpool system, while the two silent air volume controls allow you to customize the intensity of the massage.

Download PDF
report

Ask a question and I''ll find the answer in the document

Finding information in a document is now easier with AI

Related papers

Other documents