Cobra Systems VnM 4 User manual

Brand: Cobra Systems

Model: VnM 4

Type: User manual

User Manual

Updated: 4/2016

VnM SignMaker, Safety Signs & LabelsVnM SignMaker, Safety Signs & Labels

Version 3.0

VnM 4 SignMaker

TABLE OF CONTENTS

Introduction

Quick-start

Overview

Loading Ink Rolls

Loading Media

Setup

Print and Font Settings

Navigation

VnM®4 Templates

a) 1 to 5 Line Horizontal

b) 1 Line Vertical

c) Custom 1 Line

d) OSHA/ANSI Haz Com

e) GHS Template

f) Lockout Tags

g) Pipe Marking

h) Barcode/QR Code Labels

i) Formatted Signs

Font and Symbols

OSHA and ANSI Safety Identication

Pipe Marker Color Chart

Connecting to a PC

Maintenance/Troubleshooting

Accessories

Frequently Asked Questions

Technical Support/Service and Repair

19-20

Thank you for purchasing the VnM®4 SignMaker by Cobra Systems, Inc.

The compact, high-performance VnM 4 SignMaker System has been developed to provide a

fast, easy, and hassle-free solution to all your industrial applications. Print directly from the

preprogrammed smart keyboard, or have the ability to print via USB connection (not supported

unless used with purchased VnM LabelDirect software).

Dimensions: 2.36” (L) x 8.39” (W) x 7.40” (H)

Operating Conditions: 41°-104° F (5°-40° C )

Storage Conditions: -40°-140° F (-40°-60° C )

Resolution: 203 DPI

AC Input: 100 - 240V Power Supply

DC Output: 24V 3.75A (external adapter)

Print Speed: Variable, from 2” to 7” per second

Connections: VnM® Keypad, USB, LPT

VnM®4 SignMaker comes with a Limited Lifetime Warranty, 1-Year Print-head Warranty, 6-Month

Cutter Warranty, and 1-Year Keypad Warranty.

The VnM®4 SignMaker System includes:

1. VnM®4 SignMaker Printer (1)

2. VnM®4 SignMaker Keypad

with RS232 Cable (1)

3. Printer Power Supply (1)

4. Printer Power Cord (1)

5. Printer USB Cable for

PC Connection (1)

6. Take-Up Core for

VnM® Ink (1)

7. VnM® Ink Take-Up

Spindles (2)

Introduction

Warranty

Out of the Box

Specications

PRINTER MUST BE TURNED OFF!

1. Open printer lid by pressing the green tabs on each

side located toward the front of the printer.

2. Slide ink roll onto spindle and set in rear hub. Insert

second spindle into empty cardboard core and set in

front hub. Pass ink ribbon under the ink roll carriage

and print head. Attach ink ribbon to the empty core

and take up any slack before closing cover.

3. Slide new media onto mount. 4. Feed media, face up, under the white Teon bar

through the cutter slot. Adjust the green media

guides to t the width of the vinyl.

5. With the printer powered o, plug the keyboard and

power cord into the rear of the printer.

6. Plug the power cord into a properly grounded AC

outlet.

VnM®4 SignMaker Quickstart

NOTE: Always have the VnM printer cover closed when powering on.

VnM4 SignMaker Top View

1. Ribbon access cover

2. LED indicator

3. Feed button

4. Printer top cover

5. Top cover latch

6. Cutter

VnM4 SignMaker Rear View

7. USB port

8. Parallel port

9. Keyboard connection (RS-232 DB-9)

10. Power receptacle

11. Power switch

VnM4 SignMaker Interior View

12. Top cover

13. Top cover support

14. Centering guides

15. Print head

16. Spindle slot

17. White Teon bar

7 8 9 10 11

VnM®4 SignMaker Overview

Always turn

o printer

when

changing

Ink Rolls!

Open the

ribbon

access cover.

Load front

ink spindle

with an

empty take-

up core.

1 2

Pull ink from

rear to front

going under

the print

head and up

to the empty

take-up core.

Make sure

ink spindles

are as shown.

NOTE

: Larger

circular end

on the right

side.

Close cover,

you’re ready

to load Label

Media.

Load rear

ink spindle

with the

new ink

roll.

Tape the

ink to empty

take-up

core.

Wind the

front ink

spindle to

take up the

slack, making

sure there

are no

wrinkles in

the ink.

NOTE: Always have the VnM printer cover closed when powering on.

Loading VnM®4 Ink Roll

Loading VnM®4 Media

Always turn

o printer

when

changing

Media

Rolls! Use

only VnM®4

Media.

Insert the

VnM®4

media roll

into the

printer’s

spindle

mount.

Pull media

through

cutter.

Pull a short

piece of

media

through

and past the

cutter.

Turn printer

on by

ipping

the power

switch

located on

the back.

You’re ready

to start

printing!

Pull media

under the

white roller.

Adjust

guides to t

the Media.

Lift lid to

unlock hinge.

Once closed

push down

to lock cover.

NOTE: You

should hear

a clicking

sound.

NOTE: Handle media on the sides to prevent ngerprints on Vinyl.

Connecting VnM®4 Keypad and Power Up

1. Place printer on a at, secure surface.

2. Make sure power switch is OFF.

3. Connect VnM4 Keypad to the VnM4 SignMaker RS-232 serial port.

4. Plug power supply into rear of the printer; plug power cord into a

properly grounded outlet.

VnM®4 SignMaker Setup

Power On/O Plug to Outlet

Power Supply

Power Cables

RS232

Parallel Port

USB

Optional Battery Pack

To change print settings, including font, print speed or density, make sure you are on the

main menu; press and hold the ALT + EXIT keys at the same time.

4. Enter the Printer speed and press ENTER.

Recommended at 2.

5. Enter the print density and press ENTER.

Recommended density based on the ink

color being used:

Black: 3-5, White: 10-13

Blue: 1-3, Green: 1-3, Red: 1-3

SELECT MEDIA WIDTH:

Press 1,2,3, or 4

A) To Change Print Settings

1. This should be the rst screen you see.

VNM PRINT SETTINGS

Press ENTER

2. Press the DOWN arrow key until you see

VNM PRINT SETTINGS and press ENTER.

VNM MANUAL SETTINGS

Press ENTER

3. To manually change the print speed, print

density, and/or cutter settings, press

ENTER on VNM MANUAL SETTINGS.

ENTER DENSITY:

ENTER SPEED:

SELECT MEDIA WIDTH:

Press 1,2,3, or 4

B) To Change Font Settings

1. This should be the rst screen you see.

SELECT FONT/SYMBOLS

Press ENTER

2. Press the UP arrow key until you see

SELECT FONT/SYMBOLS and press ENTER.

CHOOSE FONT/SYMBOLS:

BOLD

3. Using the up and down arrows on the

keyboard, locate your desired font and

press ENTER. To get back to the main

menu after you have selected your font,

hold down ALT and EXIT.

CHOOSE FONT/SYMBOLS:

ITALIC

CHOOSE FONT/SYMBOLS:

NORMAL

CHOOSE FONT/SYMBOLS:

PIPE MARKER

CHOOSE FONT/SYMBOLS:

UTILITY

CHOOSE FONT/SYMBOLS:

SYMBOLS2

CHOOSE FONT/SYMBOLS:

SYMBOLS1

CHOOSE FONT/SYMBOLS:

SYMBOLS3

VnM®4 Print and Font Settings

6. Select your printer cutter option.

Press 1 for On, Press 2 for O

ENTER DENSITY:

7. To get back to the Main Screen, use the

UP arrow or hold down ALT + EXIT.

SET CUTTER:

(1)ON (2)OFF

NOTE: See pages 19 - 21 for fonts and symbols.

FORMATTED SIGNS

Press ENTER

HOW TO PRINT

QUOTATIONS

VnM4 Tips

SELECT MEDIA WIDTH:

Press 1,2,3, or 4

SELECT FONT/SYMBOLS

Press ENTER

VNM PRINT SETTINGS

Press ENTER

SELECT MEDIA WIDTH:

Press 1,2,3, or 4

Use the UP and DOWN

arrow keys on the VnM®4

Keypad to navigate

through the templates.

Press the ENTER key to

select your template.

“SELECT MEDIA WIDTH” is the Main Menu

when powering on the VnM 4 SignMaker,

and when pressing the ALT + EXIT keys.

To begin printing, select the size of media

that is loaded in the printer.

The VnM®4 keypad navigation tree on the

left displays the ow and order of all the

available options/templates.

Detailed information about each template

starts on page 10.

If an entry error has

been made, press the

EXIT key and re-enter

the information.

In order to print quotations (“) or inch and

foot marks, press the SHIFT key + PERIOD

key (on the numeric keypad). Do not use

the keypad QUOTATION key, you will have

blank text.

1 to 5 LINE HORIZONTAL

Press ENTER

CUSTOM 1 LINE

Press ENTER

OSHA TEMPLATES

Press ENTER

GHS TEMPLATE

Press ENTER

LOCK OUT TEMPLATES

Press ENTER

PIPE MARKING TEMPLATES

Press ENTER

BARCODE TEMPLATES

Press ENTER

1 LINE VERTICAL

Press ENTER

VnM®4 SignMaker Prompt: MAIN MENU

VnM®4 Keypad Navigation

PRINT UP TO

5 LINES OF TEXT

WITHOUT THE USE

OF A COMPUTER

OR SOFTWARE!

c) 5 Lines Template

d) 1 Line Template, no (N) reverse text

DANGER!

b) 1 Line Template, (Y) reverse text

1 to 5 LINE HORIZONTAL

Press ENTER

X INCH - HOW MANY LINES?

Press 1,2,3,4, or 5

RESERVE TEXT?

1.(Y)ES or 2.(N)O

ENTER QUANTITY TO PRINT:

ENTER TEXT:

/CAUTION

1. Select the 1 to 5 LINE HORIZONTAL

template by pressing the ENTER key on

the keyboard.

2. Select how many lines of text to print by

pressing the numbers 1, 2, 3, 4, or 5.

DO NOT PRESS ENTER.

3. Enter the text/symbols for your sign and

press ENTER when nished.

4. Enter the quantity of signs to print and

press ENTER.

5. Select if you would like REVERSE TEXT.

Press Y or 1 for Yes, Press N or 2 for No.

The 1 to 5 Line Horizontal template is the most versatile template for the VnM®4 SignMaker.

Create anything from 1 to 5 lines of text and your font size will adjust automatically to your

selected media size.

The CAUTION sign below was created by selecting the SYMBOLS 1 font (explained on page 8).

Select the 1 to 5 LINE HORIZONTAL template and choose 1 for the number of lines to be

printed. For this CAUTION sign, you will enter: /CAUTION (The / mark represents the

CAUTION symbol.) To use any other symbols, use the reference chart on pages 19-21.

a) 1 Line Template sign, no (N) reverse text printing, using SYMBOLS 1 font

TO GET BACK TO THE MAIN

MENU PRESS AND HOLD

THE ALT AND EXIT BUTTONS

AT THE SAME TIME.

VnM4 Tips

VnM®4 Keypad Templates: 1 to 5 Line Horizontal

a) No (N) reverse text

c) SYMBOLS 1 font

b) Reverse (Y) text

ENTER TEXT:

EXIT

REVERSE TEXT?

1.(Y)ES or 2.(N)O

ENTER QUANTITY TO PRINT:

1 LINE VERTICAL

Press ENTER

1. Select the 1 LINE VERTICAL template by

pressing the ENTER key.

2. Enter the text/symbols for your vertical

sign and press ENTER.

3. Enter the quantity of signs to print and

press ENTER.

4. Select if you would like reverse text.

Press Y or 1 for Yes, Press N or 2 for No.

The 1 Line Vertical template allows you to easily create instant vertical signs and labels. The

samples below were created with our 1 Line Vertical template.

WHEN SMALL TYPE IS

NEEDED WHILE USING 4”

MEDIA, SELECT A SMALLER

MEDIA WIDTH, E.G. 2” OR 3”.

VnM4 Tips

VnM®4 Keypad Templates: 1 Line Vertical

CUSTOM 1 LINE

Press ENTER

VnM®4 Keypad Templates: Custom 1 Line

The Custom 1 Line template is a great way to label parts bins, 5S and Tool applications. The

samples below were created with our Custom 1 Line template.

140 VOLTS

NOTE: Text copy will be condensed or expanded to accommodate the width & height of

the media and size selection.

1. Select the CUSTOM 1 LINE template by

pressing the ENTER key.

2. Enter the second dimension which

represents the HEIGHT of the label:

Press 1 for 1”, 2 for 2” and 5 for 1/2”.

3. Enter text and/or symbols for the line of

text and press ENTER.

4. Enter quantity of labels to print and

press ENTER.

ENTER TEXT:

140 VOLTS

ENTER QUANTITY TO PRINT:

X X ?

Press 1,2 or 5 (1/2 in)

a) 4 x 1 inches (actual size)

140 VOLTS

c) 4 x 1/2 inch (actual size)

b) 4 x 2 inches (actual size)

DANGER HEADER?

Press ENTER

X INCH - HOW MANY LINES?

Press 1.2,3, or 4

ENTER LINE 1:

HIGH

ENTER LINE 2:

VOLTAGE

ENTER QUANTITY TO PRINT:

OSHA/ANSI HAZ COM

Press ENTER

OSHA TEMPLATES

Press ENTER

1. Select OSHA TEMPLATES by pressing

the ENTER key.

6. Enter the text/symbols for your second

line and press ENTER.

Select the OSHA/ANSI HAZ COM template

or DIE CUT TEMPLATES option by pressing

the ENTER key.

NOTE: For VnM pre-printed OSHA/ANSI

media, select DIE CUT TEMPLATES only.

(Die Cuts are pre-printed header labels

as shown below.)

7. Enter the quantity of signs to print and

press ENTER.

3. Select a header option. Choose from:

CAUTION, DANGER, NOTICE, SAFETY, or

WARNING and press ENTER.

DO NOT USE WITH DIE CUT LABELS.

4. Select how many lines of text to print by

pressing the numbers 1, 2, 3, or 4.

DO NOT PRESS ENTER.

5. Enter the text/symbols for your rst line

and press ENTER.

The OSHA/ANSI Haz Com template is perfect for creating Caution, Danger, Warning, Notice,

and Safety signs. The samples below were created with our OSHA templates.

MUST WEAR

EAR AND EYE

PROTECTION

NOTICE

UNAUTHORIZED

PERSONNEL

WILL BE

PROSECUTED

a) OSHA/ANSI, DANGER, 2 lines b) OSHA/ANSI, NOTICE, 3 lines c) OSHA/ANSI, WARNING, 4 lines

MUST WEAR

EAR AND EYE

PROTECTION

KEEP OUT

HIGH

VOLTAGE

HOT

SURFACE

EMPLOYEES

ONLY

Die Cut, WARNING Die Cut, DANGER2Die Cut, DANGER Die Cut, CAUTION Die Cut, NOTICE

HIGH

VOLTAGE

/DANGER

DIE CUT TEMPLATES

Press ENTER

VnM®4 Keypad Templates: OSHA/ANSI Haz Com

d) Compressed

Gas

ENTER QUANTITY TO PRINT:

CHOOSE PICTOGRAM:

Explosive

GHS TEMPLATE

Press ENTER

1. Select the GHS TEMPLATE and press ENTER.

(This template only works with our 4” x 4” media.

All other label sizes can be printed with our

GHS software. For more details, see below.)

2. Select a GHS Pictogram by pressing the

UP and DOWN arrow keys and press ENTER.

(Available pictograms are shown above and below)

3. Enter the quantity of labels to print and

press ENTER.

The GHS template is perfect for creating individual indicators for chemical labeling. The

samples below were created with our GHS template.

c) Oxidizinga) Explosive b) Flammable

f) Toxice) Corrosive g) Irritant h) Environmentally

Damaging

i) Health

Hazard

VnM®4 Keypad Templates: GHS

Sample GHS labels

NOTE: Using VnM pre-printed red diamond labels, the VnM SignMaker System will print all

the necessary black content, including pictogram images.

For more information or to download our GHS software go to www.vnmsignmaker.com/ghs

ENTER COMPLETION DATE:

6/8/2016 9AM TO 12PM

7. Enter the estimated completion date for

your job and press ENTER.

LOTO TEMPLATE 1

Press ENTER

ENTER NAME:

JOHN DOE

ENTER DATE:

1/1/2016

2. Select the LOTO TEMPLATE 1 by pressing the

ENTER key.

3. Enter name of employee and press ENTER.

4. Enter the date and press ENTER.

a) LOTO Template 1

ENTER QUANTITY TO PRINT:

8. Enter the quantity to print and press ENTER.

LOCK OUT TEMPLATES

Press ENTER

a) Lock Out Templates, LOTO Template 1

THIS LOCK/TAG MAY ONLY

BE REMOVED BY:

NAME: JOHN DOE

DATE: 1/1/2016

JOB DESCRIPTION:

LOCATION ABC

GU143CM

ESTIMATED LENGTH OF JOB:

6/8/2016 9AM TO 12PM

OUT OF

SERVICE

DO NOT USE!

NAME: JOHN DOE

DATE: 1/1/2016

1. Select LOCK OUT TEMPLATES by

pressing the ENTER key.

(This template only works with our LOTO media.)

b) Lock Out Templates, LOTO Template 2

VnM®4 Keypad Templates: Lockout Tags

LOTO TEMPLATE 2

Press ENTER

ENTER NAME:

JOHN DOE

ENTER DATE:

1/1/2016

2. Select the LOTO TEMPLATE 2 by pressing the

ENTER key.

3. Enter name of employee and press ENTER.

4. Enter the date and press ENTER.

ENTER QUANTITY TO PRINT:

5. Enter the quantity to print and press ENTER.

b) LOTO Template 2

ENTER DESC. LINE 1:

LOCATION ABC

5. Enter the 1st line of job description and

press ENTER.

ENTER DESC. LINE 2:

VALVE OPEN

6. Enter the 2nd line of job description and

press ENTER.

ENTER QUANTITY TO PRINT:

5. Enter the quantity to print and press ENTER.

REPEAT TEMPLATE:

Press ENTER

3. Select the REPEAT TEMPLATE and press ENTER.

ENTER TEXT:

;

PIPE SIZE (inch dia.)

4. Enter the symbol/character and press ENTER.

5. Enter diameter of your pipe and press ENTER.

c) Repeat Template

ENTER QUANTITY TO PRINT:

6. Enter the quantity to print and press ENTER.

PIPE MARKING TEMPLATES

Press ENTER

NITROGEN

a) 2 x 12 inches

FIRE SPRINKLER WATER

b) 1 x 7 inches

DOMESTIC CHILLED WATER;

d) 3 x 24 inches

€ € € € € €

c) 2 inch Repeat Template, 4 inch diameter

1. Select PIPE MARKING TEMPLATES by

pressing the ENTER key.

2. Select any PIPE MARKING TEMPLATE

option by pressing the UP and DOWN

arrow keys.

The Pipe Marking template meets ANSI/ASMI letter height standards and tape lengths,

allowing you to create custom pipe markers.

Below is a 2 x 12 pipe marker example identifying the contents of the pipe as NITROGEN (a).

IF YOU ARE NOT SURE WHICH

TEMPLATE TO USE, REFER

TO THE VNM PIPE MARKING

GUIDE ON PAGE 22.

VnM4 Tips

VnM®4 Keypad Templates: Pipe Marking

1INCH - MARKING TEMPLATE

1 X 7 INCHES (1 LINE)

3INCH - MARKING TEMPLATE

3 X 24 INCHES (1 LINE)

2INCH - MARKING TEMPLATE

2 X 12 INCHES (1 LINE)

4INCH - MARKING TEMPLATE

4 X 24 INCHES (1 LINE)

2INCH - MARKING TEMPLATE

2 X 14 INCHES (1 LINE)

4INCH - MARKING TEMPLATE

4 X 32 INCHES (1 LINE)

2INCH - MARKING TEMPLATE

2 X 12 INCHES (1 LINE)

3. Select any PIPE MARKING TEMPLATE option

and press ENTER.

ENTER TEXT:

NITROGEN

4. Enter the text/symbols for the pipe marker

and press ENTER.

NOTE: To add an arrow to your text (as displayed

on sample ”C”), use the ; (semicolon) character.

Use PIPE MARKER font on page 19 for reference.

a) Pipe Marking Templates

BARCODE TEMPLATES

Press ENTER

1. Select BARCODE TEMPLATES by

pressing the ENTER key.

2. Select any BARCODE TEMPLATE

option by pressing the UP and DOWN

arrow keys.

The Barcode templates include a basic 4” x 1” inventory/asset label, and a 4” x 2” bin/shelf

barcode template utilizing the CODE39 symbology.

Below are samples of the 4 x 1 and 4 x 2 barcode templates.

CHOOSE FROM 2”, 3” OR 4”

MEDIA BASED ON THE SIZE

OF YOUR APPLICATION.

VnM4 Tips

VnM®4 Keypad Templates: Barcode/QR Code Labels

a) 2 x 1 Barcode Template

745698

b) 4 x 2 Bin Label Template

98756

PRODUCT DETAILS

c) QR Code

SELECT 1 INCH TEMPLATE:

1 X 2

SELECT 3 INCH TEMPLATE:

3 X 1

SELECT X INCH TEMPLATE:

QR CODE

2. Select the QR CODE option and press ENTER.

ENTER QR CODE:

HTTP://VNMSIGNMAKER.COM

ENTER QUANTITY TO PRINT:

3. Enter the characters and press ENTER.

4. Enter the quantity to print and press ENTER.

c) QR Code Templates

SELECT X INCH TEMPLATE:

2 X 1

2. Select any BARCODE option and press ENTER.

ENTER BARCODE:

745698

ENTER QUANTITY TO PRINT:

3. Enter the barcode number and press ENTER.

4. Enter the quantity to print and press ENTER.

a) Barcode Templates

SELECT X INCH TEMPLATE:

4 X 2 BIN LABEL

Select the BIN LABEL option and press ENTER.

ENTER BARCODE:

98756

ENTER DESCRIPTION:

PRODUCT DETAILS

ENTER QUANTITY TO PRINT:

3. Enter the barcode number and press ENTER.

4. Enter a description and press ENTER.

5. Enter the quantity to print and press ENTER.

b) Bin Label Templates

SELECT 2 INCH TEMPLATE:

2 X 1

SELECT 2 INCH TEMPLATE:

2 X 4 BIN LABEL

SELECT 4 INCH TEMPLATE:

4 X 1

SELECT 4 INCH TEMPLATE:

4 X 2 BIN LABEL

Arc Flash Template

1. Scroll to FORMATTED SIGNS and press ENTER.

Select ARC FLASH TEMPLATE and press ENTER.

3. Enter the quantity to print and press ENTER.

NOTE: Pre-printed Die-Cut Header labels are

required for this selection.

f) Aisle Markers, (2) Dash

Arc Flash and Shock Hazard

Appropriate PPE Required

Refer to NFPA 70E for minimum PPE requirements.

Do not operate controls or open covers without

appropriate personal protection equipment.

Failure to comply may result in injury or death!

g) Arc Flash Template

Fire Templates

1. Scroll to FORMATTED SIGNS and press ENTER.

2. Select FIRE TEMPLATES and press ENTER.

3. Select a Fire Template option.

For a Fire Extinguisher sign (a) or (b) press 1

4. Select a label size option.

Press 1 for a 4 x 12 sign (a)

Press 2 for a 4 x 18 sign (b)

For a Fire Hose sign (c) or (d) press 2

4. Select a label size option.

Press 1 for a 4 x 12 sign (c)

Press 2 for a 4 x 18 sign (d)

5. Enter the quantity to print and press ENTER.

NOTE: 4” media is required.

Aisle Markers

1. Scroll to FORMATTED SIGNS and press ENTER.

2. Select AISLE MARKERS and press ENTER.

3. Select a Floor Marker option.

Press 1 for ARROW (e)

Press 2 for DASH (f)

4. Enter the quantity to print and press ENTER.

e) Aisle Markers, (1) Arrow

VnM®4 Keypad Templates: Formatted Signs

b) Ext. 4x18

c) Hose 4x12

a) Ext. 4x12

d) Hose 4x18

Keypad 123456789-+!

Normal 123456789-+!

Italic 123456789-+!

Bold 123456789-+!

Pipe Marker

123456789-+!

Utility

123456789

Symbols 1 123456789-

Symbols 2 123456789

Symbols 3

1234 5 6 7 8 9- + !

@ # $ % ^ & *( ) € = ;/ ?

@ # $ % ^ & * ( ) €=; / ?

@#$% ^ & * ( ) €=; / ?

@# $ % ^ & * ( ) €=; / ?

@# $ % ^ & *( ) €=;/?

#$ % ^

*( ) €

()

€

;

/ ?

# $ %

()€

;

@ # $ % ^ & * ( ) €= ; / ?

Keypad a b c d e f g h i j k l

Normal a b c d e f g h i j k l

Italic a b c d e f g h i j k l

Bold a b c d e f g h i j k l

Pipe Marker

a b c d e f g h i j k l

Utility

a b c d e f g h i j k l

Symbols 1 a b c d e f g h i j k l

Symbols 2 a b cd e f g h i

k l

Symbols 3 a b c d e f g h i j k l

m n o p q r s t u v w x y z

m n o p q r s t

q r

u v

x y z

The SELECT FONT/SYMBOLS template includes 5 dierent fonts and 3 dierent symbol

options using the legend below. Choose the appropriate symbols(s) for your sign.

VnM®4 Fonts and Symbols

Page is loading ...

Cobra Systems VnM 4 User manual

Brand: Cobra Systems

Model: VnM 4

Type: User manual

Download PDF

report

Cobra Systems VnM 4 User manual

Cobra Systems VnM 4 User manual

Other documents