Installation Instructions for using the DaVoice Smartphone Car Mount
1. Loosen both vertical and horizontal adjusting screws to allow easy
installation of the Smartphone adapter.
2. Connect the Smartphone adapter to the suction cup mount using the
standard 1/4” screw.
3. Install the suction cup mount to a smooth, CLEAN surface and press the
suction cup tab down. (Towards the mounting surface)
4. Adjust your phone position to the desired location and tighten all screws
securely, including the 1/4” adapter screw. (Numbers 1 and 2 in diagram)
The adapter is spring-loaded, so you can pull it open some (by pulling the rubber piece on top) to
insert your cell phone. Release the rubber grip piece. The adapter will put enough pressure on the
phone from the spring action to hold the cell phone in place on the car mount.
Troubleshooting:
If the cell phone tripod adapter or car mount arrived broken, please let us know by clicking on
“Contact Seller” button in your order history by this product, or by the seller DaVoice in the
product listing, then you will see the “Have a Question for DaVoice? Ask a question” button and
we can send you a replacement free of charge, or use the link below:
https://amazon.com/gp/help/contact-seller/contact-
seller.html?sellerID=A11M4MGZGGFZHT&marketplaceID=ATVPDKIKX0DER&ref_=v_sp_
contact_seller
Please include your order number so we can pull your information.
/
