The Great Outdoors 8166-615B-L User manual

Type
User manual

The Great Outdoors 8166-615B-L is a lighting fixture designed for indoor use. It features an LED light source with a maximum wattage of 14W, providing energy efficiency and long-lasting illumination. The fixture includes a glass diffuser that helps distribute light evenly, creating a comfortable and inviting ambiance. Installation involves connecting the fixture's wires to the corresponding house wires (black to black, white to white, and ground wire to ground wire) and securing the fixture to the ceiling junction box.

The Great Outdoors 8166-615B-L is a lighting fixture designed for indoor use. It features an LED light source with a maximum wattage of 14W, providing energy efficiency and long-lasting illumination. The fixture includes a glass diffuser that helps distribute light evenly, creating a comfortable and inviting ambiance. Installation involves connecting the fixture's wires to the corresponding house wires (black to black, white to white, and ground wire to ground wire) and securing the fixture to the ceiling junction box.

INSTALLATION INSTRUCTIONS
For Model 8166-L
READ AND SAVE THESE INSTRUCTIONS
W A R N I N G ! S H U T P O W E R O F F AT F U S E O R C I R C U I T B R E A K E R .
AVERTISSEMENT! COUPER LE COURANT AU NIVEAU DES FUSIBLES OU DU DISJONCTEUR.
Fig.1
Fig. 2
Fig.3
HANGING THE FIXTURE (Fig. 1)
1. Shut off the power at the circuit breaker and remove the old fixture.
2. Carefully unpack your new fixture and lay out all the parts on a clear
area. Take care not to lose any small parts necessary for installation.
3. CONNECTING THE WIRES (Fig. 2)
At this point, connect the electrical wires as follows:
Connect the black wire from the fixture to the black (hot) wire.
Connect the white wire from the fixture to the white (neutral) wire.
Make sure all wire nuts are secured. Wire connections may be
wrapped with electrical tape if necessary. If your outlet has a ground
wire (green or bare copper), connect fixture’s ground wire to it.
Otherwise, connect fixture’s ground wire directly to the crossbar
using the green screw provided. Tuck the wire connections neatly
into the ceiling junction box.
4. Align fixture (C) to post (E) and secure with mounting screws (D).
5. Remove fixture cage (C) by loosening screws (F). Place glass
diffuser (Z) onto LED (G) Re-attach fixture cage (C) to the bottom
plate with screws (F).
6. Bulb (G) information: (1 x AC LED 14W included.)
DO NOT EXCEED THE MAXIMUM WATTAGE RATING! (NE
PAS DEPASSER LA PUISSANCE NOMINALE MAXIMALE!)
Replacing LED module (Fig. 3)
The LED module can be replaced by a qualified electrician
without cutting of wire and without damage to any decorative
element to which the fixture is attached. See installation steps for
more details (Fig 3.)
a.
Shut off the power at the circuit breaker.
b. Remove fixture cage (C) by loosening screws (F). Remove
glass diffuser (Z).
c. Carefully remove LED module (Q) by loosening screws (H).
Note: The LED module should be provided by a specified
supplier.
d. For better heat dissipation the LED module (Q) should be
installed with the heat transfer material (P) when re-lamping.
Your installation is now complete. Return power to the
junction box and test the fixture
FIXTURE
WIRES
Black or
HOUS
E
WIRES
Black
(Hot)
FIXTURE
WIRES
White or
HOUS
E
WIRES
White
FIXTURE
WIRES
Bare
Copper
(Ground)
HOUS
E
WIRES
Green
or
  • Page 1 1

The Great Outdoors 8166-615B-L User manual

Type
User manual

The Great Outdoors 8166-615B-L is a lighting fixture designed for indoor use. It features an LED light source with a maximum wattage of 14W, providing energy efficiency and long-lasting illumination. The fixture includes a glass diffuser that helps distribute light evenly, creating a comfortable and inviting ambiance. Installation involves connecting the fixture's wires to the corresponding house wires (black to black, white to white, and ground wire to ground wire) and securing the fixture to the ceiling junction box.

Ask a question and I''ll find the answer in the document

Finding information in a document is now easier with AI