Eneo VMC-6.4/2-MM1 Installation And Operating Instructions Manual

1

Montage und Betriebsanleitung

6,4” LCD/TFT-Farbmonitor VMC-6.4LCD-P1,

6,4” LCD/TFT-Farbmonitormodul VMC-6.4/2-MM1

Installation and Operating Instructions

6.4” LCD/TFT Colour Monitor VMC-6.4LCD-P1,

6.4” LCD/TFT Colour Monitor Module VMC-6.4/2-MM1

Mode d’emploi

Moniteur Couleur LCD/TFT 6,4” VMC-6.4LCD-P1,

Moniteur module couleur LCD/TFT 6,4” VMC-6.4/2-MM1

Instrucciones de Montaje y Servicio

Monitor de Color LCD/TFT 6,4” VMC-6.4LCD-P1,

Módulo de monitor en color LCD/TFT 6,4” VMC-6.4/2-MM1

2

Inhaltsverzeichnis

1. Sicherheitshinweise / Pﬂege ..................................................................................................................................3

2. Allgemeine Beschreibung .......................................................................................................................................

4

3. Funktionsbeschreibung ..........................................................................................................................................5

4. Anschlussbeispiele .................................................................................................................................................7

5. Technische Daten ...................................................................................................................................................8

6. Maßzeichnungen .................................................................................................................................................27

Contents

1. Safety Instructions / Maintenance ..........................................................................................................................9

2. General Descriptions ............................................................................................................................................

10

3. Function Descriptions ..........................................................................................................................................11

4. Sample Connections ............................................................................................................................................13

5. Speciﬁcations ......................................................................................................................................................14

6. Dimensional Drawings .........................................................................................................................................27

Sommaire

1. Consignes de sécurité / Maintenance ...................................................................................................................15

2. Description générale ............................................................................................................................................

16

3. Description de fonction ........................................................................................................................................17

4. Exemples de branchements .................................................................................................................................19

5. Caractéristiques techniques .................................................................................................................................20

6. Croquis ................................................................................................................................................................27

Contenido

1. Instrucciones de seguridad / Mantenimiento ........................................................................................................21

2. Descripción general .............................................................................................................................................

22

3. Descripción de función.........................................................................................................................................23

4. Ejemplos de conexión ..........................................................................................................................................25

5. Característicad técnicas .......................................................................................................................................26

6. Medidas ...............................................................................................................................................................27

Betriebsanleitung

Installation and Operating Instructions

Mode d’emploi

Instrucciones de manejo

www.videor.com

⇒

Page is loading ...

9

1. Safety Instructions / Maintenance

• Read these safety instructions and the operation manual ﬁrst before you connect and power to the unit.

• Keep the operation manual at a safe place for later reference.

• Never cover the ventilation slots to avoid overheating.

• Never insert metallic or other parts into the ventilation slots. This could cause permanent damage to the unit.

• If the monitor is brought to a warm room from a cold place allow it to warm up before you power it on.

• Protect unit and cables from entry of moisture and humidity. Never power the unit up if humidity entered but have

it checked at a qualiﬁed service station.

• Operate the unit only at a temperature range of –20°C to +70°C and a humidity of max. 90%.

• Never place the monitor in direct sunlight or close to a window. Humidity and direct sunlight can cause substantial

damage.

• Do not place any heavy objects on the unit.

• Never apply pressure to the LCD screen. This could cause permanent damage to the display.

• Always disconnect the unit from mains if it has to cleaned or is not used for a longer time.

• To disconnect the power cord of the unit, pull it out by the plug. Never pull the cord itself.

• Pay attention when laying the connection cable and observe that the cable is not subject to heavy loads, kinks, or

damage and no moisture can get in.

Do not attempt to disassemble the camera board from the dome.

• Contact your local dealer in case of malfunction.

• The warranty becomes void if repairs are undertaken by unauthorized persons. Do not open the housing.

• Maintenance and repair have to be carried out only by authorized service centers.

Before opening the cover disconnect the unit from mains input.

• Only use original parts and accessories from Videor E. Hartig GmbH.

• Do not use strong or abrasive detergents when cleaning the dome. Use a dry cloth to clean the dome surface.

In case the dirt is hard to remove, use a mild detergent and wipe gently.

• The user of this system has to adhere to local regulations on surveillance, recording and interception of audio

signals. This is his sole responsibility to keep himself informed on these regulations.

NOTES regarding burn-in effect on TFT monitors

• Normally, an image cannot be „burned” onto an LCD screen, as is the case with tubelar monitors.

• However, a „memory effect” can occur, which generally becomes visible after the same image has been displayed

for several hours. With ﬁxed images the liquid crystal molecules are arranged in a certain way and can eventually

become so inert that they no longer completely renew themselves.

• If an „after image” occurs, the resulting white images can be corrected using a generator.

• The memory effect should not be regarded as a fault; rather it is inherent in the LCD Panel structure and method of

working. A warranty claim cannot be brought on the basis of the memory effect. More details on request.

10

2. General Descriptions

• Display Screen Size 6,4” (16,3cm)

• PAL/NTSC Auto Selection

• Resolution of 320x234 Pixels

• 2 Video/Audio Inputs

(# 90511)

2x Video Inputs (# 90518)

• On-screen Menu Control

• Mirror Function

• Integrated Loudspeaker

(only at # 90511)

• Supply Voltage: 12VDC

• Low Power Consumption

• Rugged Plastic Housing with Table Stand

(# 90511)

Metal Module Housing (# 90518)

Supplied Items

1x LCD-Monitor

1x Power supply 100~240VAC

(only # 90511)

2x Connection kit

(only # 90511)

1x Table stand

(only # 90511)

1x Operation manual

1x Control Board

(only # 90518)

11

3. Function Descriptions

3.1 Coulour Monitor VMC-6.4LCD-P1

Front view

Side view

6 7 8 9

1

Display Remove protection foil after installation.

2

MODE Selection of settings: CONTRAST, BRIGHTNESS, HUE, SATURATION, SHARPNESS,

MIRROR SETTING and VOLUME.

3

Change of settings. Values can be increased or decreased. Selection of AV1 or AV2

4

POWER ON/OFF switch

5

LED Turns green if the monitor is switched on.

Turns off if no input receives a signal. (Power save mode)

6

OFF/ON ON/OFF switch

7

DC IN Power supply 12VDC / 500mA

8

AV1

The jack 8 (AV1) and 9 (AV2) are audio and video inputs.

9

AV2 Two cables with cinch connectors (white = audio, yellow = video) are supplied.

10

Speaker At the rear side of the monitor.

2+3

Fixed Settings The settings (contrast, brightness, colour, saturation, sharpness, mirror. volume and

the position of the display on the screen) can be adjusted and stored.

To reset all settings: Switch off the monitor (Main Power: Off), press MODE and

▼

simutaneously and power on the monitor.

2 3 4 5

MODE POWER

1

12

3.2 Coulour monitor module VMC-6.4/2-MM1

1 2 3 4

Connection Coulour of wire

1

DC IN red-black

2

Video 1

yellow-black

3

Video 2 green-black

4

Board (see drawing) grey

Menu

D/AV1

U/AV2 Power

13

4. Sample Connections

Colour monitor VMC-6.4LCD-P1

Colour monitor module VMC-6.4/2-MM1

Power adapter

LCD Monitor

Camera

V 2

DC IN (+12V)

Camera

V 1

Power adapter

LCD Monitor

VCD

AV 1

DC IN (+12V)

Camera

V 2

Power adapter

LCD Monitor

AV 2

DC IN (+12V)

AV 1

VCR

VCD

14

5. Speciﬁcations

Type VMC-6.4LCD-P1 VMC-6.4/2-MM1

Art. No.

90511 90518

Video standard

PAL / NTSC (auto selection)

Synchronization

Internal

Display element

Colour TFT/LCD

Screen size

6.4” (16.3 cm)

Horizontal resolution

320 pixels (RGB triple: 3x 320 pixels)

Vertical resolution

234 pixels

Contrast ratio typical

350:1

Brightness typical

330cd/m2

Viewing angle L/R/B/T

60°/60°/40°/55°

Response time typical

40ms, Tr: 15ms, Tf: 25ms

PC interfaces

no

Video inputs (type)

Composite, VBS

Video inputs

2x 1Vp-p, (C)VBS, 75ohms,

Cinch adapter cable

2x 1Vp-p, (C)VBS, 75ohms

Audio inputs

1, 30mVss ~ 100mVss

no

Loudspeaker

Built-in –

Supply voltage

12VDC (±10%)

(PSU 230VAC/12VDC included)

12VDC (±10%)

Power consumption

7.5watts max. 8watts max.

Operations (Front part)

Power ON/OFF, mode, OSD menu

Connectors

– 2x BNC socket, DC voltage socket

Temperature range (Operation)

-20°C ~ +70°C

Housing material

Plastic Aluminium

Colour (housing)

Anthracite Silver

Dimensions

See drawing

Weight

Approx. 570g Approx. 235g

Parts supplied

Plugable PSU 230VAC,

table stand, connection cables

Control board

Options

– Audio inputs

6. Dimensional Drawings

See page 27

Page is loading ...

28

eneo

®

ist eine eingetragene Marke der Videor E. Hartig GmbH

Vertrieb ausschließlich über den Fachhandel.

eneo

®

is a registered trademark of Videor E. Hartig GmbH

Excl. distribution through specialised trade channels only.

eneo

®

est une marque propriété de Videor E. Hartig GmbH

Distribution et vente à travers les distributeurs spécialisés.

eneo

®

es una marca registrada de Videor E. Hartig GmbH

Venta a traves de los distribuidores especializados.

Videor E. Hartig GmbH

Carl-Zeiss-Straße 8 · 63322 Rödermark/Germany

Tel. +49 (0) 6074 / 888-0 · Fax +49 (0) 6074 / 888-100

www.videor.com

Technische Änderungen vorbehalten

Technical changes reserved

Sous réserve de modiﬁcations techniques

Sujeto a modiﬁcaciones técnicas

Eneo VMC-6.4/2-MM1 Installation And Operating Instructions Manual

This manual is also suitable for

Eneo VMC-6.4/2-MM1 Installation And Operating Instructions Manual

in other languages

Related papers

Other documents