Rowlinson Raised Bed/Sandpit Assembly Instructions

  • Hello! I am an AI chatbot trained to assist you with the Rowlinson Raised Bed/Sandpit Assembly Instructions. I’ve already reviewed the document and can help you find the information you need or explain it in simple terms. Just ask your questions, and providing more details will help me assist you more effectively!
No. Fixing Kit Qty.
5 50mm screws 12
No. Components Qty.
1Half logs 4
2 Full logs 8
3 Top boards 4
4 Lid half * 2
2
1
3
2009 © Rowlinson Garden Products Ltd
Before assembly
We recommend that time is taken to read the instructions before
starting assembly, then follow the easy step by step guide.
The instruction sheet is only a guide to the assembly.
Certain items may not be shown to scale.
Check all components prior to assembly
Drill all components where indicated.
Never attempt to erect the assembly in high winds.
Recommended tools for assembly
Cross head screw driver
Drill with 3mm diameter drill bit
Drill
ROWLINSON GARDEN PRODUCTS LIMITED
Green Lane
Wardle, Nr. Nantwich
Cheshire
CW5 6BN
Help Line (Normal Office Hours) 01829 261 121
English SS233
Assembly Instructions
Sandpit planter
We constantly improve the quality of our products, occasionally the
components may differ from the components shown and are only
correct at time of printing. We reserve the right to change the
specification of our products without prior notice.
50mm
4
For sandpit with lid only: place lid halves on top.
3mm
It is recommended to drill
pilot holes for each screw.
*
*Lid halves are only included when
puchased as sandpit with the lid
option.
/