Rowlinson Garden Creations Plant Stand Assembly Instructions

Type
Assembly Instructions
Assembly Instructions
Garden Creations Plant Stand English SS409
ROWLINSON GARDEN PRODUCTS LIMITED
Green Lane
Wardle, Nr. Nantwich
Cheshire, CW5 6BN
email: support@rowgar.co.uk
Help Line (Normal Office Hours) 01829 261 121
Before assembly
• We recommend that time is taken to read the instructions before starting
assembly, then follow the easy step by step guide. The instruction sheet is
only a guide to the assembly. Certain items may not be shown to scale.
• Check all components prior to assembly
• This product should be assembled by no less than two people
• Drill Pilot hole for each screw if necessary
x 2 Drill
Recommended tools for assembly
• Power drill/screwdriver
• 3mm drill bit
• Crosshead screwdriver bit
No. Components Qty.
1 Panel 1
2 Angled legs 2
3 Large shelf 1
4 Medium shelf 1
5 Small shelf 1
No. Fixing Kit Qty.
6
6 80mm screws
7 50mm screws 13
We constantly improve the quality of our products, occasionally the components
may differ from the components shown and are only correct at time of printing. We
reserve the right to change the specification of our products without prior notice.
2017 © Rowlinson Garden Products Ltd
50mm
50mm
80mm
50mm
50mm
80mm
80mm
1
5
5
2
3
3
4
4
1. Angled Legs 3. Medium and small shelf
2. Large shelf
1
2
50mm
Biocidal Products
Regulation EU 528/2012
Korasit® KS treated wood
is a treated article that
incorporated biocidal products:
copper hydroxide carbonate,
N,N-didecyl-N-methypoly
ammoniumpropionate. They
protect wood against fungal
decay, rot and insect attack.
Keep away from food, drink
and animal feeding stuffs. Avoid
breathing dust when cutting
treated wood.
  • Page 1 1

Rowlinson Garden Creations Plant Stand Assembly Instructions

Type
Assembly Instructions

Ask a question and I''ll find the answer in the document

Finding information in a document is now easier with AI