2. urban ambiance
  3. UQL3960

urban ambiance UQL3960 Installation guide

  • Hello! I've reviewed the installation instructions for the UQL3960 light fixture from urban ambiance. This document details how to safely install the fixture, which has an adjustable height using multiple rod options. It also specifies the required candelabra E12 base bulbs and includes steps for wiring and mounting the fixture. I'm ready to assist with any questions you have regarding the installation process or the features outlined in the instructions.
  • What type of bulbs does the fixture use?
    Are the bulbs included in the package?
    What is the maximum wattage for the bulbs?
    How do I adjust the fixture height?
1 of 3
Light SourceTools Required
4 BULBS REQUIRED
BULBS NOT INCLUDED
Warnings and Cautions
Turn off the electricity at the circuit breaker
before installation. Consult a licensed
electrician if in doubt about installation.
Turn off power to the fixture and allow the
bulbs to cool before replacing.
Crossbar Assembly
x 1
A
Package Contents
PARTS BAG Fixture Body
x 1
Crossbar
Assembly Ceiling Canopy
& Rods
Ceiling Canopy
to ceiling
Table of
Contents
STEP 3STEP 2 STEP 5
Fixture Height Adjustable
32.5” to 68.5”
E
Ceiling Canopy
x 1
D
Preparation: Identify and inspect all parts
before beginning the installation.
Missing or damaged parts? Contact your
original place of purchase.
Wiring
STEP 4
6”L Rod
x 2
G
12”L Rod
x 2
H
F
Glass Shade
x 4
Bulbs
STEP 6
Outlet Box Screw
x 2
B
Wire Connector
x 3
C
BULB BASE TYPE
Candelabra (E12)
BULB SHAPE
TYPE B
60W
MAX
Glass Panel
STEP 1
Installation Instructions: UQL3960
www.urbanambiance.com
2 of 3
STEP 1 1 2 3
Insert glass panel into cage
with wider edge is on the top
Insert the bottom of the glass panel
into the slot on the bottom and
attach the glass panel to the cage
2
1
Slot
Wide Edge
Fold the tab in the top
of the cage to secure
the glass panel
Tab
STEP 2 1 2 3
Step 1
Install crossbar assembly
Step 2 - 3
Test fitting ceiling canopy to mounting screws
STEP 3
Optional Rods
8’ ceiling:
(1) 6"L
9’ ceiling:
(1) 6"L + (1)12”L rods
10’ ceiling:
(1) 6”L + (2) 12”L rods
1 2
Insert rod to fixture body Insert ceiling canopy
to upper rod
www.urbanambiance.com
3 of 3
STEP 5
STEP 4
*Green Ground Screw
on crossbar optional
White wire (neutral)
from outlet box
Ground wire
from Fixture
Black or Red wire (hot)
from outlet box
Bare or Green ground wire
from outlet box
STEP 6
White wire
from fixture
Black wire
from fixture
www.urbanambiance.com
/