2. YABER
  3. K2S
K2S

YABER K2S User manual

  • Hello! I'm your chat assistant and I've reviewed the user manual for the Yaber K2s projector. This document provides instructions on setting up the projector, using Alexa voice commands, troubleshooting image issues, and more. I'm here to help with any questions you might have about the K2s projector.
  • Which remote control should I use?
    Why does a pop-up window of yaber.com appear after NFC recognition?
    Why can't connect to bluetooth?
Dear Customers,
There are some FAQs as follows. I hope they help you
Alexa commands supported by YABER K2s
1. Alexa, Turn off the projector
2. Alexa, Switch to hdmi on projector
3. Alexa, Open Netfix/youtube on projector
4. Alexa, Go settings on projector
5. Alexa, Go home on projector
6. Alexa, Mute/unmute/volume up/volume down on projector
7. Alexa, Pause/resume on projector
8. Alexa, Open bluetooth settings on projector
9. Alexa,Open network settings on projector
10. Alexa, Turn on/off screen saver on projector
11. Alexa, Turn on/off auto focus on projector
12. Alexa, Turn on/off silent mode on projector
13. Alexa, Turn on/off screencast on projector
14. Alexa, Turn on/off document mode on projector
15. Alexa, Next /previous/start over on projector
More Alexa commands will be added continuously by the yaber team
There are two remote controls, which one should l use?
Both remote controls can be used. Normally, only the projector remote control is needed to
control all the operations of the K2s, including those in Android TV.
The first time you use Android TV, you need to use Android remote control to match.
If you want to experience the built-in voice function in Android TV, you can use the Android remote
control after connecting it via Bluetooth (this remote control can only be used in Android TV)
Why does a pop-up window of yaber.com appear after NFC recognition?
If NFC configuration has not been completed, scanning the NFC tag will trigger the default
pop-up window. Please follow the instructions in the manual to complete the NFC configuration first.
It's still blurry after auto-focusing?
a. If the angle exceeds 20 degrees, the edge/part of screen will show in blurry, please re-adjust the
distance or angle.
b. Use the remote control for manual focus, go to Setting-->Manual Focus, and click the 'F+/F-'
button on the remote control to continuously adjust until it is clear.
Why can't connect to bluetooth?
a. Bluetooth can only transmit audio signals, not video/picture signals. So all bluetooth projectors can only
connect to bluetooth speakers/headphones/sound bars,but not to mobile phones/computers to project
video.
b. Please check if your device is connected to other Bluetooth accessories.
c. If still cannot connect to speaker, it may be a compatibility issue. Please send us model No. of the
bluetooth speaker for more help.
Why does the picture suddenly appear darker?
If there is a"Moon icon similar to the one on the right" displayed in the upper right corner of
the main page, it means that Quiet Mode is turned on, and the brightness will be reduced in this mode.
You can turn it off by pressing the corresponding button on the K2s or clicking 'Quiet Mode" on the
main page
Go to Setting->Projection -> Brightness Setting to check if the brightness is set too low.
Why is the automatic correction invalid after moving the projector, or the correction degree is
very small?
Over 20 degrees, automatic correction cannot be performed, you can use the remote control
to perform manual correction, Open Setting-->-4-Points Keystone to adjust suiteable screen.
Why does a pop-up window appear every time after performing automatic keystone
correction?
In order to achieve the perfect picture effect, you can use the left and right directional keys to
make fine adjustments to the keystone correction after each automatic correction. If you do not
need to make further adjustments, simply press the back button to quickly close this pop-up
window.
If it still cannot solve your problem, we're always online for your 100% satisfaction!
Please fee l free to let us know and solve your problem.
Best Regards,
support@yabertech.com
/