NOTES:
1. SUGGESTED BOLT CIRCLE: 12" DIAMETER
MAXIMUM BOLT CIRCLE: 15" DIAMETER
MINIMUM BOLT CIRCLE: 10" DIAMETER
2. HADCO STRONGLY RECOMMENDS USING LEVELING
NUTS TO MOUNT THE POST BASE. IF FOUNDATION IS
NOT LEVEL, INCREASE "X"DIMENSION ACCORDINGLY WHEN
USING LEVELING NUTS WITH WASHERS.
X = 3 1/2" MINIMUM WITH LEVELING NUTS
X = 2 1/2" MINIMUM WITHOUT LEVELING NUTS
3. IF USING GROUTING TO CONCEAL GAP BETWEEN BASE
AND FOUNDATION, ALLOW FOR WATER DRAINAGE.
UNLESS OTHERWISE SPECIFIED:
*ALL DIMENSIONS ARE IN INCHES.
*ALL THREADS ARE UNC-2B OR UNF-2B
AFTER COATING.
*ALL THREADS ARE TO BE VERIFIED
WITH A THREAD GAGE.
CONFIDENTIAL:
This drawing is confidential and proprietary
to Signify Holdings and may not be reproduced in whole or
in part without the express written consent of Signify
Holdings. © 2018 Signify Holdings.
All rights reserved.
ACCESS DOOR
10.00"
15.00"
VERIFY BOLD LINE
IS 10" LONG
STREET
19.25
SEE NOTE 2
X
GROUND LINE
(4) 3/4" DIAMETER
HOT DIPPED GALVANIZED
STEEL ANCHOR RODS
CONDUIT
(BY OTHERS)
FOOTER
(BY OTHERS)
(4) LEVELING WASHERS
AND NUTS
(4) MOUNTING WASHERS
AND NUTS
ACCESS DOOR
OPENING
*
WARNING
*
NOT TO SCALE
CONSULT FACTORY FOR
FULL SIZE TEMPLATE.
*THE ABOVE NOTE IS TO BE MOVED INTO THE DRAWING
ONLY WHEN CREATING A PDF FOR THE WEB.CHANGE
SCALE TO NTS. DO NOT SAVE CHANGES TO SLDDRW!
HOUSE SIDE
SIDE
APPR
REV
ISO DOC
BY
DATE
SDK
F
19-001
AMP
2/21/2019
T01000808
PART NO:
* DO NOT SCALE THIS DRAWING *
MATERIAL: 22 X 34" WHITE BOND PAPER,
D
DRW SIZE:
T01000808
PART NO:
TITLE: TEMP,CP1619E
EF-04-01-11 Rev.09
SCALE 1:1
SHEET 1 OF 1
B. DORON
E. HADDAD
10/6/09
6/19/07
E. ANDERSON
6/19/07
DATE:
DATE:
DATE:
APPR BY:
DRAWN BY:
CHECKED BY:
/
