Hadco P1900 Series Poles (P1910, P1950) Install Instructions

Brand: Hadco

Model: P1900 Series Poles (P1910, P1950)

Type: Install Instructions

UNLESS OTHERWISE SPECIFIED:

*ALL DIMENSIONS ARE IN INCHES.

*ALL THREADS ARE UNC-2B OR UNF-2B

AFTER COATING.

*ALL THREADS ARE TO BE VERIFIED

WITH A THREAD GAGE.

WARNING

NOT TO SCALE

CONSULT FACTORY FOR

FULL SIZE TEMPLATE.

CONFIDENTIAL:

This drawing is confidential and proprietary

to Signify Holdings and may not be reproduced in whole or

in part without the express written consent of Signify

20.00

SEE NOTE 2

(4) MOUNTING WASHERS

AND NUTS

(4) LEVELING WASHERS

AND NUTS

(4) 3/4" DIAMETER

HOT DIPPED GALVANIZED

STEEL ANCHOR RODS

FOOTER

(BY OTHERS)

GROUND LINE

SCALE 1:7

ACCESS DOOR OPENING

6.00

1.033

8.000

7.000

9.500

ACCESS DOOR

HOUSE SIDE

STREET SIDE

VERIFY BOLD LINE

IS 7" LONG

NOTES:

1. (4) ANCHOR RODS:

SUGGESTED BOLT CIRCLE:9 1/2" DIAMETER

MAXIMUM DIAMETER: 9 1/2" DIAMETER

MINIMUM DIAMETER: 7" DIAMETER

(3) ANCHOR RODS:

USE ONLY ON AN 8" DIAMETER BOLT CIRCLE.

2. HADCO STRONGLY RECOMMENDS USING LEVELING

NUTS TO MOUNT THE POST BASE. IF

FOUNDATION IS NOT LEVEL, INCREASE

"X" DIMENSION ACCORDINGLY WHEN USING

LEVELING NUTS WITH WASHERS.

X = 2 3/4" WITH LEVELING NUTS

X = 2" WITHOUT LEVELING NUTS

3. IF USING GROUTING TO CONCEAL GAP BETWEEN

BASE AND FOUNDATION, ALLOW FORM WATER

DRAINAGE.

TOP SECTIONED

VIEW

APPR

REV

ISO DOC

DATE

SDK

19-001

AMP

2/20/2019

T01700944

PART NO:

CHECKED BY:

DRAWN BY:

APPR BY:

DATE:

7/15/98

T.A. GOLDEN

7/15/98

8/4/09

E. HADDAD

B. DORON

SHEET 1 OF 1

SCALE 1:1

EF-04-01-11 Rev.09

TITLE: TEMP,P1915

PART NO:

T01700944

DRW SIZE:

MATERIAL: 17 X 22 WHITE BOND PAPER,

* DO NOT SCALE THIS DRAWING *

*THE ABOVE NOTE IS TO BE MOVED INTO THE DRAWING

ONLY WHEN CREATING A PDF FOR THE WEB. CHANGE

SCALE TO NTS. DO NOT SAVE CHANGES TO SLDDRW!

*THE "VERIFY BOLD LINE" NOTE IS USED FOR TEMPLATES AS

A WAY FOR THE END USER TO VERIFY THAT THE DRAWING

WAS PRINTED FULL SCALE. PICK A LINEAR ENTITY (I.E. A

LINE NOT AN ARC) ON THE DRAWING THAT WOULD BE

EASILY MEASURABLE BY THE END USER WITH A RULER OR

TAPE MEASURE. MOVE THE BOLD LINE OVER THAT ENTITY

SO IT STANDS OUT ON THE DRAWING.

Hadco P1900 Series Poles (P1910, P1950) Install Instructions

Hadco P1900 Series Poles (P1910, P1950) Install Instructions

Hadco P1900 Series Poles (P1910, P1950) Install Instructions

Related papers

Other documents