Hadco P1900 Series Poles (P1910, P1950) Install Instructions

Type
Install Instructions
*
WARNING
*
NOT TO SCALE
CONSULT FACTORY FOR
FULL SIZE TEMPLATE.
APPR
REV
ISO DOC
BY
DATE
ARG
G
10-137-006
3/15/11
WHD
WHD
F
09-065
08-039
ALD
8/4/09
EH
D
04-097
JAG
6/7/04
WHD
8/26/08
E
ALD
CONFIDENTIAL:
This drawing is confidential and
proprietary to Philips and may not be reproduced in
whole or in part without the express written consent of
Philips. All rights reserved.
© 2011 by Philips Electronics.
UNLESS OTHERWISE SPECIFIED:
*ALL DIMENSIONS ARE IN INCHES.
*ALL THREADS ARE UNC-2B OR UNF-2B
AFTER COATING.
*ALL THREADS ARE TO BE VERIFIED
WITH A THREAD GAGE.
20.00
SEE NOTE 2
X
(4) MOUNTING WASHERS
AND NUTS
(4) LEVELING WASHERS
AND NUTS
(4) 3/4" DIAMETER
HOT DIPPED GALVANIZED
STEEL ANCHOR RODS
FOOTER
(BY OTHERS)
GROUND LINE
SCALE 1:7
ACCESS DOOR OPENING
6.00
1.033
8.000
7.000
9.500
ACCESS DOOR
HOUSE SIDE
STREET SIDE
VERIFY BOLD LINE
IS 7" LONG
NOTES:
1. (4) ANCHOR RODS:
SUGGESTED BOLT CIRCLE:9 1/2" DIAMETER
MAXIMUM DIAMETER: 9 1/2" DIAMETER
MINIMUM DIAMETER: 7" DIAMETER
(3) ANCHOR RODS:
USE ONLY ON AN 8" DIAMETER BOLT CIRCLE.
2. PHILIPS
STRONGLY RECOMMENDS USING LEVELING
NUTS TO MOUNT THE POST BASE. IF
FOUNDATION IS NOT LEVEL, INCREASE
"X" DIMENSION ACCORDINGLY WHEN USING
LEVELING NUTS WITH WASHERS.
X = 2 3/4" WITH LEVELING NUTS
X = 2" WITHOUT LEVELING NUTS
3. IF USING GROUTING TO CONCEAL GAP BETWEEN
BASE AND FOUNDATION, ALLOW FORM WATER
DRAINAGE.
TOP SECTIONED
VIEW
T01700944
PART NO:
CHECKED BY:
DRAWN BY:
APPR BY:
DATE:
DATE:
DATE:
7/15/98
T.A. GOLDEN
7/15/98
8/4/09
E. HADDAD
B. DORON
SHEET 1 OF 1
SCALE 1:1
EF-04-01-11 Rev.09
TITLE: TEMP,P1915
PART NO:
T01700944
DRW SIZE:
C
MATERIAL: 17 X 22 WHITE BOND PAPER,
* DO NOT SCALE THIS DRAWING *
100 Craftway, P.O. Box 128
Littlestown, Pennsylvania 17340-0128
  • Page 1 1

Hadco P1900 Series Poles (P1910, P1950) Install Instructions

Type
Install Instructions

Ask a question and I''ll find the answer in the document

Finding information in a document is now easier with AI