Page is loading ...
LINK
UNIVERSAL 0-8GA POWER OR GROUND
LINKABLE FUSED DISTRIBUTION BLOCK
XFDB108 PATENT PENDING
XFDB108
Stinger is a Power Brand of AAMP Global
15500 Lightwave Drive, Suite 202
Clearwater, Florida 33760
Technical Support: 800-477-2267
StingerElectronics.com
Cover
ANL
Fuse Mount
8 Gauge
Adapter
8 Gauge
Adapter
Input
Plug
4 Gauge
Adapter
4 Gauge
Adapter
AFS/Mini ANL
Fuse Mount
XLINK
Ground Jumper
*
XLINK X-Pansion Jumper
*
XLINK Interlocking Base
To connect 2 or more XLINKS,
align locking channel and
press together.
INSTALLATION GUIDE
QUICK TIPS
XLINK X-Pansion Jumper
Distribute power or ground across multiple
XLINK blocks by connecting the X-Pansion
jumper to input side of block.
Connecting this way; if a single circuit blows a
fuse, the XLINK block will continue providing to
power to the other circuits.
XLINK Gauge Adapters
Convert to any combination of
0GA, 4GA or 8GA inputs and
outputs. Make sure the adapter opening
lines up with the wire set screw.
COMPONENTS
4mm
Wire Set Screw
WARNING!
NEVER use the XLINK Jumpers in place of a fuse
Cover any unused input with an Input Plug
XLINK systems should not exceed 500 AMP in total fusing
© Copyright 2018
WARNING! NEVER use the XLINK jumpers in place of a fuse.
125A
125A
125A
125A
Single ANL Fuse Holder
- 1/0GA, 4GA, 8GA Input/Output
Single AFS Fuse Holder
- 1/0GA, 4GA, 8GA Input/Output
XLINK Ground Jumper
- 1/0GA, 4GA, 8GA Input/Output
SINGLE BLOCK
GROUND BLOCK
POWER BLOCK
COMBO BLOCK
+
+
+
+
+
1/0 GA 12V(+) Positive
1/0 GA 12V(+) Positive
Fused 1/0 GA 12V
Fused 4 GA 12V
Fused 8 GA 12V
200A
200A
X-pansion Jumpers
AFS/MINI ANL FUSES
ANL FUSE
1/0 GA Ground
1/0 GA Ground
4 GA Ground
8 GA Ground
X-pansion Jumpers
125A
125A
1/0 GA Ground
1/0 GA Ground
4 GA Ground
X-pansion Jumpers
4 GA Ground
+
Fused 4 GA 12V
+
Fused 4 GA 12V
125A
125A
125A
125A
+
XLINK Ground Jumper
/
