Stinger UN1810 Operating instructions

Type
Operating instructions

Stinger UN1810: Take control of your car's audio system with this powerful multimedia receiver, featuring a 10.1” touchscreen display. Experience seamless entertainment with Apple CarPlay and Android Auto integration, and enjoy high-quality audio with a built-in amplifier. Customize your sound with a 13-band equalizer and digital time alignment. The UN1810 also supports SiriusXM and HD Radio, and includes a rear-view camera input for added safety and convenience.

Stinger UN1810: Take control of your car's audio system with this powerful multimedia receiver, featuring a 10.1” touchscreen display. Experience seamless entertainment with Apple CarPlay and Android Auto integration, and enjoy high-quality audio with a built-in amplifier. Customize your sound with a 13-band equalizer and digital time alignment. The UN1810 also supports SiriusXM and HD Radio, and includes a rear-view camera input for added safety and convenience.

UN1810 System Firmware Update Instructions
StingerElectronics.com
TECH TIP
1. Format a USB Drive
Before copying the rmware le to a USB Flash Drive, the USB drive will need to be
formatted to FAT32 / MS-DOS(FAT)
USB Drive Format: Windows PC
A. Insert a 4GB+ USB Drive
D. Select FAT 32 File System and
un-check Quick Format and
click Start.
B. Open File Explorer
C. Right click on USB Drive &
select Format
USB Drive Format: Mac
A. Insert a 4GB+ USB Drive
D. Select MS-DOS(FAT) from the
format drop-down menu and click
Erase
B. Launch the Disk
Utility App from the
Utilities folder
C. Select the USB drive from the
“External” List and click Erase
TECH TIP
StingerElectronics.com
2. Download Firmware
Download the rmware le from StingerElectronics.com. Transfer the rmware le “as is” onto
the formatted USB drive. The le must be in the root directory of the USB drive. Do not unzip
the le. See example A for Windows and B for Mac.
A. Windows PC
B. Mac
A. Select Settings from the Main Menu
3. Updating Firmware
Insert the USB drive into either USB port on the radio.
NOTE: When updating the rmware, all settings will be reset to factory defaults....
station presets, EQ presets, audio/crossover settings, time alignment, camera settings.
If need be, record this information before updating rmware.
TECH TIP
B. Touch the Gear Icon
C. Enter 15500 then OK
StingerElectronics.com
D. Touch Update software OK
The update will take 6-8 minutes.
Do not attempt to stop the update.
DO NOT turn off power. The system will be
damaged if power is lost during the update
process.
The system will show the Radio source after the
update is complete.
TECH TIP
4. System Reset
When the update is complete and display is on the Radio source, press the
Reset Button on the face off the radio. The reset process takes 1-2 minutes,
when completed, the unit will return to the Radio source.
Reset
Button
Stinger is a Power Brand of AAMP Global
15500 Lightwave, Clearwater, Florida 33760
P: 888-228-5560
www.stingerelectronics.com
© 2020 AAMP Global
TECHNICAL SUPPORT:
727-592-5991
Mon-Fri 9AM-8PM EST
Sat 9AM-7PM EST
Check Out The New Features
Download the updated User Guide
https://stingerelectronics.com/products/heigh10
TT-FW-UPDATE HEIGH10 REV_050520
  • Page 1 1
  • Page 2 2
  • Page 3 3
  • Page 4 4

Stinger UN1810 Operating instructions

Type
Operating instructions

Stinger UN1810: Take control of your car's audio system with this powerful multimedia receiver, featuring a 10.1” touchscreen display. Experience seamless entertainment with Apple CarPlay and Android Auto integration, and enjoy high-quality audio with a built-in amplifier. Customize your sound with a 13-band equalizer and digital time alignment. The UN1810 also supports SiriusXM and HD Radio, and includes a rear-view camera input for added safety and convenience.

Ask a question and I''ll find the answer in the document

Finding information in a document is now easier with AI