Stinger UN1880 Operating instructions

Brand: Stinger

Model: UN1880

Type: Operating instructions

UN1880 System Firmware Update Instructions

StingerElectronics.com

TECH TIP

NOTE: This rmware update is

only compatible with UN1880

(ELEV8) models that have a

MENU Button.

1. Format a USB Drive

Before copying the rmware le to a USB Flash Drive, the USB drive will need to be

formatted to FAT32 / MS-DOS(FAT)

USB Drive Format: Windows PC

A. Insert a 4GB+ USB Drive

D. Select FAT 32 File System and

un-check Quick Format and

click Start.

B. Open File Explorer

C. Right click on USB Drive &

select Format

TECH TIP

StingerElectronics.com

USB Drive Format: Mac

A. Insert a 4GB+ USB Drive

D. Select MS-DOS(FAT) from the

format drop-down menu and click

Erase

B. Launch the Disk

Utility App from the

Utilities folder

C. Select the USB drive from the

“External” List and click Erase

2. Download Firmware

Download the rmware le from StingerElectronics.com. Transfer the rmware le “as is” onto

the formatted USB drive. The le must be in the root directory of the USB drive. Do not unzip

the le. See example A for Windows and B for Mac.

A. Windows PC

B. Mac

TECH TIP

StingerElectronics.com

A. Select Settings from the Main Menu

B. Touch the Gear Icon

3. Updating Firmware

Insert the USB drive into either USB port on the radio.

NOTE: When updating the rmware, all settings will be reset to factory defaults....

station presets, EQ presets, audio/crossover settings, time alignment, camera settings.

If need be, record this information before updating rmware.

TECH TIP

StingerElectronics.com

The update will take 6-8 minutes.... please be patient.

Do not attempt to stop the update. DO NOT turn off power. The system will

be damaged if power is lost during the update process

The system will show the Radio source after the update is complete.

C. Enter 15500 then OK

D. Touch Update software OK

TECH TIP

TT-FW-UPDATE ELEV8 REV_042020

4. System Reset

When the update is complete and display is on the Radio source, press the

Reset Button on the face off the radio. The reset process takes 1-2 minutes,

when completed, the unit will return to the Radio source.

Reset

Button

Stinger is a Power Brand of AAMP Global

15500 Lightwave, Clearwater, Florida 33760

P: 888-228-5560

[email protected]

www.stingerelectronics.com

TECHNICAL SUPPORT:

727-592-5991

Mon-Fri 9AM-8PM EST

Sat 9AM-7PM EST

[email protected]

Check Out The New Features

Download the updated User Guide

https://stingerelectronics.com/products/elev8

Stinger UN1880 Operating instructions

Stinger UN1880 Operating instructions

Stinger UN1880 Operating instructions

Related papers

Other documents