Whalen NOA8RO-WG-E User manual

Brand
Whalen
Model
NOA8RO-WG-E
Type
User manual
THIS INSTRUCTION BOOKLET CONTAINS IMPORTANT SAFETY INFORMATION.
PLEASE READ AND KEEP FOR FUTURE REFERENCE.
Date 2015-11-25 Rev. 1 Factory: KONRIC (16086)
8 Cube Room Organizer
Stock # DYL8RO-R-E Rustic
Stock # HAN8RO-DO-E Dark Oak
Stock # NOA8RO-WG-E Warm Gray
ADULT ASSEMBLY REQUIRED
We would like to hear from you with any comments or suggestions. In the continental U.S. or Canada,
you can call us toll-free at 1-888-301-0332 from 8:00 a.m. to 5:00 p.m., CST, Monday – Friday. You
can also send us an email using the feedback icon at SamsClub.com.
For assembly questions, please call 1-866-942-5362 from 8:30 a.m. to 4:30 p.m., PST, Monday –
Friday
LOT NUMBER:
DATE PURCHASE
D
:
/
/
Page 2
MANUFACTURER: Whalen Furniture Manufacturing
CATALOG: 8 Cube Room Organizer
MADE IN CHINA
CAM LOCK SYSTEM OPERATION
HOW THE ASSEMBLY SYSTEM WORKS
1. Screw the Cam Bolt into the threaded inserts on the panel. Connect both panels together; making sure Cam
Bolt goes into the pre-drilled hole on the end of panel for Cam Lock.
2. Insert the Cam Lock into the pre-drilled large hole on the panel. Make sure the arrow on the face of Cam
Lock faces out and points towards Cam Bolt.
3. Take a Phillips screwdriver and rotate the Cam Lock clockwise to lock the Cam Bolt in place.
4. Plug the Cam Lock Cover into the cross slot of the Cam Lock to conceal the Cam.
You are now ready to assemble the room organizer.
MAXIMUM RECOMMENDED WEIGHT LOADS
THIS UNIT IS INTENDED ONLY FOR USE WITHIN THE
MAXIMUM WEIGHTS INDICATED. USE WITH LOAD HEAVIER THAN THE MAXIMUM
,
CAUSING POSSIBLE INJURY.
MAXIMUM LOAD 100 lb. (45.3 kg)
MAXIMUM LOAD 20 lb. (9 kg)
MAXIMUM LOAD 200 lb. (90.7 kg)
Page 3
Parts and Hardware List
Please read completely through the instructions and verify that all listed parts and hardware are present
before beginning assembly.
A- Top/Bottom Panel (Qty. 2) B- Side Panel (Qty. 2)
C- Large Divider Panel (Qty. 2) D- Center Divider (Qty. 1)
(With Cam lock holes)
E- Small Divider Panel (Qty. 4) F- Storage Basket (Qty. 8) G- Basket Flooring (Qty. 8)
(1) ∅5/16" x 2-1/2" Bolt (2) Cam Lock (3) Cam Bolt
(Qty. 8+1 extra) (Qty. 4+1 extra) (Qty. 4+1 extra)
(4) ∅15 x 60 mm Wood Dowel (5) ∅10 x 60 mm Wood Dowel (6) Cam Lock Cover
(Qty. 12+1 extra)
(Qty. 40+2 extra)
(Qty. 4+1 extra)
T-handle Allen Wrench Touch-up Pen Tipping Restraint Hardware Kit (Qty. 1)
(Qty. 1) (Qty. 1) (Inside Plastic Bag)
Tools required: Allen wrench (provided), Phillips screwdriver and rubber mallet (not provided).
Page 4
Assembly Instructions
1. Unpack the unit and confirm that you have all the hardware and required parts.
2. Lay the Side Panels (B) on a level and protected surface with the pre-drilled holes facing up. Screw two
Cam Bolts (3) into the plastic bushings included on the center of each Side Panel (B). Fully tighten with
a Phillips screwdriver.
Cam Bolt
(4 used in this step)
③
B
3
B
Page 5
Assembly Instructions
3. Insert four Small Wood Dowels (5) half way into the pre-drilled holes on the Large Divider Panel (C)
by tapping lightly with a rubber mallet, if necessary. Position two Small Divider Panels (E) onto the
inserted Wood Dowels and press them together.
C
E
E
C
E
5
E
∅
10 x 60 mm Wood Dowel
(4 used in this step)
⑤
Page 6
Assembly Instructions
4. Attach the Center Divider (D) and one Small Divider Panel (E) to the assembled Small Divider Panel (E)
using four Small Wood Dowels (5).
5. Repeat last step to install the remaining Large Divider Panel (C) and Small Divider Panel (E) to the
previous assembly. Make certain they are located on the other end of Center Divider (D).
D
E
C
E
E
C
E
E
C
E
D
C/D
E
5
E
∅
10 x 60 mm Wood Dowel
(8 used in this step)
⑤
Page 7
Assembly Instructions
6. Insert twenty Small Wood Dowels (5) into the end holes of Large Divider Panels (C) and Center
Divider (D). DO NOT put dowels into the Cam Bolt holes.
7. Insert four Cam Locks (2) into the side holes of the Center Divider (D) making sure the arrow on the
face of Cam Lock points out and towards the entry of Cam Bolt.
8. Position the Side Panels (B) onto the inserted Small Wood Dowels (5). Press them together and secure
them in place by connecting the Cam Locks (2) (Refer to page 2 on Cam lock system operation
supplement). Once locked in place, insert the Cam Lock Covers (6) to conceal the Cam Locks.
B
B
C
E
C
E
D
C
B
5
2
6
5
3
D
B
Cam Lock Cover
(4 used in this step)
⑥
Cam Bolt
(4 used in this step)
②
∅
10 x 60 mm Wood Dowel
(20 used in this step)
⑤
Page 8
Assembly Instructions
9. Insert eight Small Wood Dowels (5) into the end holes of both Small Divider Panels (E) and insert three
Large Wood Dowels (4) into each end of the Side Panels (B).
10. Using the Wood Dowels as a guide, attach the Top and Bottom Panels (A) to both Side Panels (B) with
eight 2-1/2” Bolts (1). Tighten the bolts with the provided Allen wrench.
E
5
A
1
4
B
A
A
B
B
E
E
A
∅
5/16" x 2-1/2" Bolt
(8 used in this step)
①
∅
15 x 60 mm Wood Dowel
(12 used in this step)
④
∅
10 x 60 mm Wood Dowel
(8 used in this step)
⑤
Page 9
Assembly Instructions
11. Ask for assistance to stand the unit upright.
12. Unfold the Storage Baskets (F) and then place the Basket Flooring (G) inside the open basket to ensure
it remains square. Position the Storage Baskets onto the compartments as shown.
13. You can combine two or more units to create an attractive storage wall for your home.
F
F
F
G
F
Page 10
Assembly Instructions
14. Position the assembled cabinet at the desired location against a wall.
15. Now, follow the instructions printed on the plastic bag containing the Tipping Restraint Hardware Kit to
attach the tip-over restraints to the unit and the wall, as shown in the illustration.
NOTE: Young children can be seriously injured by tipping furniture. You must install the
Tipping Restraint Hardware with the unit to prevent the unit from tipping, causing any
accidents or damage. The tipping restraints are intended only as a deterrent, they are not a
substitute for proper adult supervision. The tipping restraints are not earthquake restraints. If
you wish to add the extra security of earthquake restraints, they must be purchased and
installed separately.
Page 11
Care and Maintenance
Use a soft, clean cloth that will not scratch the surface when dusting.
Use of furniture polish is not necessary. Should you choose to use polish, test first in an inconspicuous area.
Using solvents of any kind on your furniture may damage your furniture’s finish.
Never use water to clean your furniture as it may cause damage to the finish.
Always use coasters under beverage glasses and flowerpots.
Liquid spills should be removed immediately. Using a soft clean cloth, blot the spill gently. Avoid rubbing.
Always use protective pads under hot dishes and plates. Heat can cause chemical changes that may create
spotting within the furniture finish.
In the event that your furniture is stained or otherwise damaged during use, we recommend that you call a
professional to repair your furniture.
Check bolts/screws periodically and tighten them if necessary.
Further advice about wood furniture care
It is best to keep your furniture in a climate-controlled environment. Extreme temperature and humidity
changes can cause fading, warping, shrinking and splitting of wood. It is advised to keep furniture away from
direct sunlight as sun may damage the finish.
Proper care and cleaning at home will extend the life of your purchase. Following these important and helpful
tips will enhance your furniture as it ages.
A touch-up pen has been provided to repair any small nicks or scratches that may occur during
assembly or shipping.
We hope you enjoy your purchase for many years.
Thank you for your purchase!
QUALITY GUARANTEE
We are confident that you will be delighted with your purchase.
Should this product be defective in workmanship or materials or fail under normal use, we will repair
or replace it for up to one (1) year from date of purchase. Every our product is designed to meet your
highest expectations. We guarantee that you will immediately see the value of our fine furniture.
This warranty gives you specific legal rights and you may also have other rights which vary from
State to State.
Customer Service: 1-888-301-0332
8:00 a.m. - 5:00 p.m., CST, Monday to Friday
www.samsclub.com
  • Page 1 1
  • Page 2 2
  • Page 3 3
  • Page 4 4
  • Page 5 5
  • Page 6 6
  • Page 7 7
  • Page 8 8
  • Page 9 9
  • Page 10 10
  • Page 11 11

Whalen NOA8RO-WG-E User manual

Brand
Whalen
Model
NOA8RO-WG-E
Type
User manual
Download PDF
report

Ask a question and I''ll find the answer in the document

Finding information in a document is now easier with AI

Related papers

Other documents