Design House 519785 Installation guide

Brand: Design House

Model: 519785

Type: Installation guide

Design House 519785 is a 3-light island light fixture that is perfect for adding a touch of style to your kitchen or dining room. It features a sleek, modern design with a brushed gold finish and clear glass shades. The fixture is easy to install and comes with all the necessary hardware. It is also dimmable, so you can adjust the light output to create the perfect ambiance for any occasion. With its stylish design and versatile functionality, the Design House 519785 is a great choice for any home.

AJAX 3LT ISLAND LIGHT

ASSEMBLY/INSTALLATION INSTRUCTIONS

WARNING: Risk of Fire. Min 75ºC supply conductors. Consult a qualied electrician to ensure correct

installation.

Turn off the main power at the circuit breaker before installing the xture, in order to prevent possible

shock.

#519744

Customer Service 1-800-558-8700

All electrical connections must be in accordance with local and National Electrical Code (N.E.C.)

standards. If you are unfamiliar with proper electrical wiring connections obtain the services of a

qualied electrician.

Remove the xture and the mounting package from the box and make sure that no parts are missing by

referencing the illustrations on the installation instructions.

Phillips screwdriver.

CAUTION

GENERAL

TOOLS REQUIRED

ASSEMBLY AND INSTALLATION

(CONT.)

Please read carefully and save these instructions, as you may need them at a later date.

Turn off the power at fuse or circuit breaker.

Turn on the power at fuse or circuit breaker.

IF IN DOUBT ABOUT ELECTRICAL INSTALLATION,

CONSULT A LICENSED ELECTRICIAN.

JUNCTION BOX

MOUNTING SCREWS

WIRE NUTS

CROSS BAR

GROUND SCREW

FIXTURE

CEILING PLATE

BALL NUTS

STEMS

SHORT STEMS

LAMP HOLDER

FIXTURE SCREWS

#519785

1. Gently take all parts out of the package, lay them on a smooth surface, unscrew the BALL NUTS

and the FIXTURE SCREWS. Attach the CROSS BAR to the JUNCTION BOX using (2) MOUNTING

SCREWS.

2. Attach SHORT STEMS to FIXTURE. Then, install STEMS based on the desired length of the item,

adding CEILING PLATE once nished.

3. Make wire connections with WIRE NUTS:

A - Connect the black wire from Fixture to the black supply wire.

B - Connect the white wire from Fixture to the white supply wire.

C - Attach the xture ground wire to the CROSS BAR with the green GROUND SCREW. Then

connect it to the supply ground wire with a WIRE NUT. Carefully tuck wires back into the JUNCTION

BOX.

4. Attach the CEILING PLATE to the CROSS BAR through SCREW HOLES as shown, and secure it

with BALL NUTS.

5. Attach the IRON RACKS to the LAMP HOLDERS and secure them with SOCKET RINGS.

6. Install BULBS (not included). See relamping label at socket area or packaging for maximum allowed

wattage.

7. Attach the IRON RACKS (01) to the IRON RACKS as shown, and secure it with DECORATIVE

NUTS .

IRON RACK

IRON RACK (01)

DECORATIVE NUTS

SOCKET RING

BULB (not included)

SCREW HOLES

Item # 519744 (AJAX 3LT ISLAND LIGHT GAL)

Item # 519785 (AJAX 3LT ISLAND LIGHT BRZ)

Design House 519785 Installation guide

Design House 519785 Installation guide

Design House 519785 Installation guide

Related papers

Other documents