2. MAPerformance
  3. WRX-5G-RMD
WRX-5G-RMD

MAPerformance WRX-5G-RMD User manual

  • Hello! I've reviewed the install instructions for the MAPerformance WRX-5G-RMD Axlebacks. This document details the steps for installation, including removing old mufflers, securing the new muffler delete and installing dual exhaust tips. The document also specifies necessary tools and hardware. I'm ready to answer any questions you might have about this device or the installation process.
  • What tools are needed for installation?
    What should I do after installing the MAPerformance muffler delete?
    What should I do before tightening the exhaust tips?
MAP WRX-5G-RMD
Install Instructions
What’s in the box?
x2 MAP Axlebacks
x2 MAP 3.5” Dual Tips
x2 Tip Clamps
x4 M10x1.25x40mm Bolts
x4 M10x1.25 Flanged Nuts
x1 Anti-seize
You will need:
10mm socket
14mm socket
3/8ths ratchet
Tools needed
Step 1
1. Place vehicle on lift
Step 2
2. Remove 4 y-pipe bolts from both
mufers (14mm socket)
Step 3
3. Remove 4 rubber hangers from
both mufers and remove mufers
Step 4
4. Ensure gasket is still in place on the
y pipe ends and place MAPerformance
mufer delete in place securing with
factory hangers
Step 5
5. Secure MAP mufer delete to
factory Y pipe with oem bolts you
removed in step 4
Step 6
6. Install included exhaust tips,
securing with included clamps
be sure to use included anti seize on
the threads of the clamp and use
hand tools to tighten clamps
Step 7
7. Start and check for leaks, ensure
your tips are straight!
We hope you enjoy your
purchase! Reach out
to us with any issues or
concerns.
1-888-627-3736
@maperformance
[email protected]
www.facebook.com/modernautomo-
tiveperformance/
/