MAPerformance MAP INFQ-RMD-P User manual

Brand
MAPerformance
Model
MAP INFQ-RMD-P
Type
User manual
MAP Q60 Rear Mufer Delete
Install Instructions
What’s in the box?
-2x Mufer Delete Pipes
-2x Axle-Back Gaskets
-2x Bolt-On Tips
-4x M10 Flange Nuts
You will need:
• 3/8ths ratchet
• 3/8ths 12mm socket
• 3/8ths 14mm socket
Tools needed
Step 1
Remove 6 12mm bolts holding exhaust
hanger to the vehicle
Step 2
Remove 4 14mm nuts securing the factory
mufer to the factory exhaust
Step 3
Remove factory mufer
Step 4
Remove exhaust hangers from the factory
mufer and reinstall onto the vehicle
Step 5
Install new included gaskets onto factory
exhaust, then slide MAP Q60 Rear
Mufer deletes into place
Step 5.1
Install new included gaskets onto factory
exhaust, then slide MAP Q60 Rear
Mufer deletes into place
Step 6
Secure to factory exhaust with included
hardware and tighten to 35 FTLBS
(We include extra bolts incase your factory
studs become stripped, if your studs are in
good working order these will not be used)
Step 7
Install included tips and secure with included
clamps. Be sure to use a dab of anti seize on
the clamp threads to prevent galling
We hope you enjoy your
purchase! Reach out
to us with any issues or
concerns.
1-888-627-3736
@
[email protected]
www.facebook.com/modernautomo-
tiveperformance/
  • Page 1 1
  • Page 2 2
  • Page 3 3
  • Page 4 4
  • Page 5 5
  • Page 6 6
  • Page 7 7
  • Page 8 8
  • Page 9 9
  • Page 10 10
  • Page 11 11

MAPerformance MAP INFQ-RMD-P User manual

Brand
MAPerformance
Model
MAP INFQ-RMD-P
Type
User manual
Download PDF
report

Ask a question and I''ll find the answer in the document

Finding information in a document is now easier with AI

Related papers

Other documents