2. MAPerformance
  3. MAP WRX-4G-IN-AB
MAP WRX-4G-IN-AB

MAPerformance MAP WRX-4G-IN-AB User manual

  • Hello! I've reviewed the install instructions for the MAP Air Box WRX 4G-IN-AB. This document outlines the steps for replacing your old airbox with the new MAP airbox, including how to install the bracket and secure it using the included hardware. I'm ready to answer any questions you may have about the installation process or the included components.
  • What components should be included in the box?
    What tools will I need for the installation?
    Where do the washers go when installing the bracket?
MAP WRX-4G-IN-AB
Install Instructions
What’s in the box?
1x MAP Air Box
1x Bracket
3x M6x12 Flanged Bolts
2x M6 Locknuts
2x Washers
You will need:
• 10mm socket
• 10mm wrench
• Phillips screwdriver
• Ratchet
• Various extensions
Tools needed
Step 1
Remove existing airbox/heat shield from
the car, and remove oem lter bracket
Step 2
Install included bracket to airbox, se-
curing using included hardware. Be
sure to place washers on the inside
of the airbox.
Step 2.1
Install included bracket to airbox, se-
curing using included hardware. Be
sure to place washers on the inside
of the airbox.
Step 3
Slip MAP WRX airbox over lter, be
sure the studs from the OEM lter
bracket key into the holes on the
MAP airbox
Step 4
Install included 10mm bolt onto the vehicle,
securing with the bracket
Step 5
Install OEM intake snorkel, securing with OEM
push pins
We hope you enjoy your
purchase! Reach out
to us with any issues or
concerns.
1-888-627-3736
@maperformance
[email protected]
www.facebook.com/modernautomo-
tiveperformance/
/