PENGO 4K HDMI Grabber Pro is a powerful tool for capturing and streaming high-quality video and audio. With support for 4K resolution at 30fps and 1080p at 120fps, you can capture your gameplay, live events, or other content in stunning detail. The device also supports pass-through of HDMI VRR/Freesync, so you can enjoy smooth, tear-free gaming while still capturing your footage.
PENGO 4K HDMI Grabber Pro is a powerful tool for capturing and streaming high-quality video and audio. With support for 4K resolution at 30fps and 1080p at 120fps, you can capture your gameplay, live events, or other content in stunning detail. The device also supports pass-through of HDMI VRR/Freesync, so you can enjoy smooth, tear-free gaming while still capturing your footage.
4K HDMI Grabber Pro
User manual (v.1.5)
- English -
A. Introduction ......................................................................................................... 1
B. Features ................................................................................................................ 1
C. System requirements ........................................................................................... 1
D. Installation ........................................................................................................... 3
F. Inside the box ....................................................................................................... 1
G. Operating Instructions (Windows with OBS) ...................................................... 3
1. Video Setting ................................................................................................ 4
2. Audio Setting ................................................................................................ 6
H. Operating Instructions (Mac OS with OBS) ......................................................... 8
1
A. Introduction
Pengo 4K HDMI Grabber Pro is designed for the elite gamers. Easily enables
streamers to capture each sound and movement. Play and view your game on
your VRR/FreeSync monitor whilst capturing/streaming at 4K30fps. Allowing
the user to plug-in various 4K HDMI output devices (such as PS5/4, Xbox Series
X|S, Switch, camera, etc.) and captures 4K UHD 30Hz data through the USB
terminal. It’s powerful chipset will not affect your computer’s performance,
while maintaining a resolution up to 4K at 30 fps.
B. Features
! HDMI 2.0 input and output (pass-through) supports 4K60 HDR.
! Maximum video capture resolution up to 2160p/30Hz or 1080p/120Hz
! Support HDMI VRR/Freesync pass-through
! Supports USB 3.1 Type-C Gen1
! Supports UVC 1.0
! Supports audio LINE-IN
! Supports audio headset (TRRS only)
! Supports USB port power supply, no external power supply needed.
! Compatible with third-party applications, such as QuickTime, OBS, XSplit,
vMix, Zoom, Skype, etc.
C. System Requirements
CPU: i5 Dual Core 2.8GHz or higher
RAM: 4GB or higher
OS: Microsoft Windows 8.1/10
MacOS (10.13 and above)
D. Inside the box
! Pengo 4K HDMI Grabber Pro x 1
! USB-C to USB-A Cable x 1
! USB-C to USB-C Cable x 1
2
E. Specifications
MODEL NAME
4K HDMI Grabber Pro
INPUT INTERFACE
1 x HDMI 2.0 Type-A
OUTPUT INTERFACE
1 x USB Type-C , 1 x HDMI 2.0 Type-A
INPUT/OUTPUT(loop-
through) RESOLUTION
3840 x 2160p 60/50/30/25/24Hz
2560 x 1440p 144/60Hz
1920 x 1080p 240/144/120/60/50/30/25/24Hz 1920 x 1080i 60/50Hz
1280 x 720p 60/50Hz 720 x 576p 50Hz
720 x 480p 60Hz 720 (1440) x 576i 50Hz
720 (1440) x 480i 60Hz 640 x 480p 60Hz
CAPTURE RESOLUTION
USB3.0
SuperSpeed
NV12
YUYV
3840 x 2160p 30 Hz
2560 x 1440p 60 Hz
1920 x 1080p 120/60/50/30/25 Hz
1280 x 720p 60 Hz
720 x 480p 60 Hz
720 x 576p 50 Hz
640 x 480p 60 Hz
2560 x 1440p 50 Hz
1920 x 1080p 60/50/30/25 Hz
1280 x 720p 60 Hz
720 x 480p 60 Hz
720 x 576p 50 Hz
640 x 480p 60 Hz
USB2.0
Hi-Speed
1280 x 720p 30 Hz
720 x 576p 50 Hz
720 x 480p 60 Hz
640 x 480p 60 Hz
720 x 576p 50 Hz
720 x 480p 60 Hz
640 x 480p 60 Hz
COLOR SAMPLING
RGB, YUV (YCbCr 4:4:4, YCbCr 4:2:2, YCbCr 4:2:0)
VIDEO FORMAT
NV12 , YUYV
UAC AUDIO OUTPUT
Stereo / 16-bit PCM encoded audio at 48KHz sampling rates
AUDIO INTERFACE
LINE IN: 3.5mm input
Audio: 3.5mm headset (TRRS only)
ENVIRONMENT
Operating Temperature 0~45℃
Operating Humidity 20~90%
DIMENSION
106 x 106.4 x 21 mm (W x L x H including rubber foot)
WEIGHT
235 G
COLOR
Midnight Black
*DOES NOT CAPTURE HDCP CONTENT (ex: DVD, Blue-Ray player)
3
F. Installation
! Connect Pengo 4K HDMI Grabber Pro into the computer USB-C port using
the USB-C cable inside the package.
! Plug-in your HDMI source with an HDMI Cable into the HDMI INPUT port.
! Plug-in your display device with a HDMI Cable into HDMI LOOP-OUT port.
! Plug-in your 3.5mm headset into AUDIO port. (TRRS)
Plug-in your 3.5mm audio connector into LINE-IN port
G. Operating Instructions (Windows with OBS)
1. After plugging in your device, go to [Windows Settings] and then go under
[BT and Other Devices] and make sure Pengo 4K Grabber Pro is detected
4
2. Download OBS Studio: https://obsproject.com/
(OBS-Studio-25.0.8-Full-Installer-x64.exe)
3. Open OBS Studio. (version 25.0.8)
1. Video Setting
1.1 Add and select “Video Capture Device”, rename the source and click OK
5
1.2 Select “Pengo 4K Grabber Pro” as your device
1.3 Parameter Setting references are displayed as below
*Resolution/FPS Type: Custom
*Resolution: 3840 x 2160
*FPS: Match Output FPS (autoselect: 30)
*Video Format: NV12
*Audio Device: HDMI (Pengo 4K Grabber Pro)
6
2. Audio Setting
1.1 Click on the audio setting icon as displayed below
1.2 Select “Properties”
1.3 Under Properties: Select “HDMI (Pengo 4K Grabber Pro)” as your device
7
1.4 Under the Audio Setting Icon: Select “Advanced Audio properties”
1.5 Under Advanced Audio Properties: Adjust your audio source to suggested
preferences ( Microphone and speaker need to change the setting into
Monitor and Output)
1.6 OBS Setting completed
8
H. Operating Instructions (Mac OS with OBS)
3. Video Setting
1.1 Under Sources, click on the “+” icon and select “Video Capture Device”
1.2 Rename the input source and click OK
9
10
1.3 Under Properties: Select “Pengo 4K Grabber Pro” in Device
Do not click “Use Preset” and customize the configuration.
*Resolution: select the best resolution possible 3840 x 2160
*FPS: Simple FPS Values 30
*Input Format: NV12
11
4. Audio Setting
1.1 Click on the Audio Setting Icon as indicated below
1.2 Select “Properties”
1.3 Select “Pengo 4K Grabber Pro” in Device
12
1.4 Click on the Audio Setting Icon and select “Advanced Audio Properties”
1.5 Under Advanced Audio Properties: Select “Monitor and Output”
1.6 Setting Completed
Note:
! Make sure the computer detects it as USB 3.0. USB 3.0 is recommended.
! Different versions will have slightly different interface.
! Make sure your HDMI source does not have HDCP, we do not support HDCP.
! Please contact us if you have any issue.
! Please register your Pengo product at: www.pengohome.com/register
! We reserve the right to make any updates without prior notice
- END -
-
1
-
2
-
3
-
4
-
5
-
6
-
7
-
8
-
9
-
10
-
11
-
12
-
13
-
14
PENGO 4K HDMI Grabber Pro is a powerful tool for capturing and streaming high-quality video and audio. With support for 4K resolution at 30fps and 1080p at 120fps, you can capture your gameplay, live events, or other content in stunning detail. The device also supports pass-through of HDMI VRR/Freesync, so you can enjoy smooth, tear-free gaming while still capturing your footage.
Ask a question and I''ll find the answer in the document
Finding information in a document is now easier with AI
Related papers
Other documents
-
infobit iSwitch UVC03 User manual
-
-
AVMATRIX SDI to USB3.1 User manual
-
PIBOX Video Capture Card User manual
-
Marshall VAC-12HUC User manual
-
EzCAP 332 Game Link Combo Capture Card User manual
-
ANDYCINE U3H42 HD Video Capture User manual
-
Epiphan Video AV.io 4K User guide
-
CYP SY-XTREAM-PIP User manual
-
AVMATRIX VC12-4K 4K User manual
