PENGO HDMI to USB 3.0 1080p GRABBER HDMI to U3 Capture User manual

Type
User manual

PENGO HDMI to USB 3.0 1080p GRABBER HDMI to U3 Capture is designed to transmit uncompressed video over HDMI up to 1080p at 60Hz and capture video at 1080p 60fps. No drivers needed for Windows 8 and above, this device supports UVC 1.0 and features USB-C and USB 3.0 interfaces for superior data transfer speeds. It's compatible with OBS, Xsplit, and PotPlayer and works with PS4, XBOX, Switch, and cameras.

Capture every sound and movement, stream media easily, and maintain a resolution up to 1080p at 60fps without affecting your computer's performance.

PENGO HDMI to USB 3.0 1080p GRABBER HDMI to U3 Capture is designed to transmit uncompressed video over HDMI up to 1080p at 60Hz and capture video at 1080p 60fps. No drivers needed for Windows 8 and above, this device supports UVC 1.0 and features USB-C and USB 3.0 interfaces for superior data transfer speeds. It's compatible with OBS, Xsplit, and PotPlayer and works with PS4, XBOX, Switch, and cameras.

Capture every sound and movement, stream media easily, and maintain a resolution up to 1080p at 60fps without affecting your computer's performance.

HDMI to USB 3.0 1080p GRABBER
HDMI to U3 Capture
User manual (v.3)
- English -
2
A. Introduction ---------------------------------------------------------------------------------- 03
B. Features --------------------------------------------------------------------------------------- 03
C. Inside the box -------------------------------------------------------------------------------- 03
D. Specifications -------------------------------------------------------------------------------- 04
E. System requirements ---------------------------------------------------------------------- 04
F. Installation ------------------------------------------------------------------------------------ 05
G. Operating Instructions (Windows with PotPlayer) ---------------------------------- 05
1. PotPlayer--------------------------------------------------------------------------------- 05
H. Operating Instructions (Mac OS with VLC or QuickTime) -------------------------- 08
1. VLC ---------------------------------------------------------------------------------------- 08
2. QuickTime ------------------------------------------------------------------------------- 08
3
A. Introduction
Pengo 1080p HDMI to USB-C Grabber is designed to capture 1080p video
allowing the user to plug-in various HDMI output devicessuch as PS4, XBOX,
Switch, camera, etc.data uplink to 1920 x 1080p at 60Hz to the computer
through the USB terminal. Streaming media made easy, capture every sound
and movement. It will not affect your computers performance, while
maintaining a resolution up to 1080p at 60 frames per second.
B. Features
Supports HDMI 1.4b Standard up to 1080p @ 60fps
Supports video capture at 1080p @ 60fps
Supports 24 bit color
Supports USB 3.0 and USB 2.0 data uplink
Supports UVC 1.0, Windows 8 and above, no drivers needed.
Supports USB – C connector
Supports USB port power supply, no need for an external power supply
Compatible with third-party applications, such as PotPlayer, QuickTime, OBS,
Xsplit, vMix, etc.
C. Inside the box
! Pengo HDMI to USB 3.0 1080p Grabber x 1
! USB-C (female) to USB-A (male) adapter x 1
4
D. Specifications
DESCRIPTION
1080p HDMI to USB-C Grabber
INPUT INTERFACE
1 x HDMI Type A
HDMI 1.4b standard up to 1080p at 60fps
OUTPUT INTERFACE
1 x USB type-C (USB 3.0 )
UVC video and audio
RESOLUTION
640x480p 60Hz, 1280x720p 60Hz, 1920x1080p 60Hz
VIDEO SAMPLING
4:4:4 format
OUTPUT COLOR SPACE
YUY2, RGB
HDMI AUDIO
16-bit PCM encoded audio at 48kHz sampling rates
SYSTEM
REQUIREMENTS
CPU: i5 Dual Core 2.8GHz or higher
RAM: 4GB or higher
OS: Windows (8 and above), Mac OSX (10.13 and above)
ENVIRONMENT
Operating Temperature 0~45
Operating Humidity 20~90%
DIMENSION
42 x 240 x 14 mm ( W x L x H including cable length)
WEIGHT
40 G
COLOR
Titanium Gray
ACCESSORIES
USB-C to USB-A 3.0 Adapter
PRODUCT NUMBER
8RGR2-H01C01T0PE
EAN NUMBER
4718009820470
*DOES NOT SUPPORT HDCP
*DOES NOT SUPPORT INTERLACED (i) 1080i, 720i, 480i
E. System requirements
CPU: i5 Dual Core 2.8GHz or higher
RAM: 4GB or higher
OS: Microsoft Windows 8.1/10
Mac OS X (10.13 and above)
*Note: Not able to record HDCP content (ie: DVD, BlueRay player...etc )
5
F. Installation
1. Connect Pengo HDMI to USB 3.0 1080p Grabber into the computer via USB
3.0 Port.
2. Plug in your devices (ie: PS4 Pro, Xbox One X, Camcorder) with an HDMI
Cable into the HDMI input port.
G. Operating Instructions (Windows with PotPlayer)
1. PotPlayer
1.1 After plugging in your device, go to [Windows Settings ] and then go
under [Devices] and make sure [ HDMI to U3 Capture or USB
Audio/Video Device ] is detected **(Different OS might have different
names)
6
1.2 Download PotPlayer : https://potplayer.daum.net/
(install base on your OS version)
Open PotPlayer (different versions will have different interface)
1.3 Sound settings
Under PotPlayer menu, go to Audio -> [ Audio Renderer (Pass-
through) ] -> select [ Built-in WASAPI Audio Renderer ]
7
1.4 Select Device
I. Under Menu > Open -> Device Settings
II. Under Webcam -> Video capture device, under Device select
-> [ USB Video Device]
III. Audio capture device -> under Device select -> [ WASAPI – Mic
(USB Audio Device) ]
IV. Press [ Open device], You’ll be able to see your video and audio
1.5 Video Recording
I. Go to the Menu -> Video -> Video Recording -> Record Video
II. Select your storage location
III. Press [ Start ]
8
H. Operating Instructions (Mac OS with VLC or QuickTime) **Newer version of
VLC might not work
1. VLC
1.1 Download VLC at https://www.videolan.org/index.html
1.2 Open VLC
1.3 Go to File -> Open Capture Device
1.4 Under Capture, check the video and audio box
and select [HDMI to U3 Capture] and press Open
2. QuickTime
2.1 Open QuickTime
2.2 Go to File -> New Movie Recording
2.3 If your display does not appear, next to the record RED button drop
down menu, select [HDMI to U3 Capture]
9
Note:
It is recommended to use USB 3.0 over USB 2.0 port.
Different version will have slightly different interface.
Make sure your source does not have HDCP, we do not support HDCP.
Make sure your device is not 1080i. We do not support 1080i. We support
1080p.
Please contact us if you have any issues.
Please register your Pengo product at: www.pengohome.com/register
We reserve the right to make any updates without prior notice
- END -
  • Page 1 1
  • Page 2 2
  • Page 3 3
  • Page 4 4
  • Page 5 5
  • Page 6 6
  • Page 7 7
  • Page 8 8
  • Page 9 9

PENGO HDMI to USB 3.0 1080p GRABBER HDMI to U3 Capture User manual

Type
User manual

PENGO HDMI to USB 3.0 1080p GRABBER HDMI to U3 Capture is designed to transmit uncompressed video over HDMI up to 1080p at 60Hz and capture video at 1080p 60fps. No drivers needed for Windows 8 and above, this device supports UVC 1.0 and features USB-C and USB 3.0 interfaces for superior data transfer speeds. It's compatible with OBS, Xsplit, and PotPlayer and works with PS4, XBOX, Switch, and cameras.

Capture every sound and movement, stream media easily, and maintain a resolution up to 1080p at 60fps without affecting your computer's performance.

Ask a question and I''ll find the answer in the document

Finding information in a document is now easier with AI