VID
E
O
C
A
PT
URE
MANUAL
STEPS FOR USB VIDEO CAPTURE (OBS)
Install & Open the
OBS software and
Add new source
When the audio setting is finished, restart
the OBS audio system
[ otherwise it will cause no sound output ]
Video output format: YUV/JPEG
Video output resolution: Max to 1920x1080@60Hz
Support audio format L-PCM
Support most acquisition software, such as VLC /
OBS/ Amcap, etc .
Supports multiple OS- Windows MacOS
Interface: USB 3 .0 .
Conform to USB Video and UVC standard; USB
Audio UAC standard
Max working current: 0.4N5V DC
Dimension (L x W x H): 64x28x8 (mm)
*
*
Note:
AQ
Wh
-
" VC50G2TS
"
*1. What latency is expected with the device? *
This depends on your PC config and if its Intel I5 -
7th Gen or higher-
2. * Phone Screen - Does not capture video out -
Whats wrong?*
Check if your phone supports video out. Connect
phone directly to a TV and see if it works. Refer:
Pibox.in/willcwork.
4. *What can you do to improve latency? *
Allocate higher CPU priority to OBS. Check
background processes and make sure no other
applications are using resources.
5. *Why is the device warm?*
Its normal to see the device warm. We are using
the vents to bring out the heat.
Additional Troubleshooting:
SEND A WHATSAPP MESSAGE:
" VC50G2TS "
to WhatsApp: +91-8072238441
WhatsApp: +91-8072238441
WhatsApp: +91-8072238441