2. Zebra
  3. et 802.11ac Radio Wireless Print Server
et 802.11ac Radio Wireless Print Server

Zebra et 802.11ac Radio Wireless Print Server User manual

  • Hello! I'm your chat assistant and I've reviewed the Installation Instructions for the ZebraNet 802.11ac Radio Wireless Print Server Option/Maintenance Kit. This document covers the installation process for models including ZT410/ZT420, ZT411/ZT421, ZT510, and ZT610/ZT620. The guide provides steps from preparation to configuring Wi-Fi and Bluetooth. I'm ready to answer your questions about the installation and functionality of this print server.
  • What printers are compatible with this kit?
    Do I need a technician for installation?
    What happens to PrintTouch capability when installing this kit?
    Do I need to pair Bluetooth devices after installation?
ZEBRA and the stylized Zebra head are trademarks of Zebra Technologies Corp., registered in many jurisdictions
worldwide. All other trademarks are the property of their respective owners. © 2020 Zebra Technologies Corp. and/or
its affiliates. All rights reserved. | www.zebra.com
P1086088- 05EN
ZebraNet 802.11ac Radio Wireless Print Server
Option/Maintenance Kit
Installation Instructions
This kit includes the parts and documentation necessary to install the ZebraNet 802.11ac Radio Wireless
Print Server Option/Maintenance Kit into the following printers:
•ZT410/ZT420
•ZT411/ZT421
•ZT510
•ZT610/ZT620
Read these instructions thoroughly before installing this kit.
IMPORTANT: If the print server is being used in countries outside of the USA, Canada,
or Japan, a qualified service technician must perform this installation.
NOTE: Check the part number in the media side of the ZT410/ZT420 Printers. This kit is used on
ZT410/ZT420 Printers with the letter A in the 6th position of the part number. Example: ZT4x0A-xxxxxxxx.
If the part number does not have the letter A in the 6th position of the part number, the printer firmware
must be updated to version V75.20.14Z or later before installation.
NOTE: Installing this print server disables the ZT410/ZT420 PrintTouch capability. After installation,
Bluetooth devices must be paired with the printer manually.
Parts List
Before proceeding, verify that the kit contains the following items.
UID#.
ZT400
.
I
D#
.
UI
U
UID#.
ZT510
0
0
T
4
00
T
T
ZT
Z
.
ID
D#.
UI
U
UID#.
ZT600
0
0
T5
5
5
1
10
T
T
ZT
Z
.
ID
D#
#
UI
U
ZT
6
6
6
0
00
0
6
2
3
4
1
5
2
Tools Required
Item Description Qty
Ref Wireless Print Server 802.11ac Radio Option/Maintenance Kit, Region A (USA
and Canada)
Wireless Print Server 802.11ac Radio Option/Maintenance Kit, Region B
(Japan)
Wireless Print Server 802.11ac Radio Option/Maintenance Kit, Region C (All
other countries other than regions, A and B)
1ZebraNet Print Server 802.11ac Accessory Card 1
2ZebraNet Print Server 802.11ac Antenna 1
3ZT400 Compliance Label 1
4ZT510 Compliance Label 1
5ZT600 Compliance Label 1
6Screws, M3 × 0.5 × 6 2
To reorder specific parts, navigate to zebra.com/parts, and select the printer model.
•Metric Hexalobular Wrench Set
•Phillips Screwdriver Set
•Antistatic Wriststrap and Mat
•Programming Guide for ZPL II, ZBI 2, Set-Get-Do, Mirror, and WML or Internet access to download
the guide from zebra.com.
3
Prepare for Installation
CAUTION: Turn off (O) the printer and disconnect it from the power source before performing the following
procedure.
CAUTION—ESD: Observe proper electrostatic safety precautions when handling static-sensitive
components such as circuit boards and printheads.
1. Connect yourself to an antistatic device.
2. Are you replacing an existing option card?
Remove the Old Option Card
1. See Figure 1 to verify the slots that can be used for the various option cards.
Figure 1 Option Card Locations (ZT610 shown)
If… Then…
Yes Go to Remove the Old Option Card.
No Go to Remove the Cover Plate on page 5.
1Blank cover
2Parallel port
3Applicator interface
4USB Host
5Wireless (only in this location)
6Internal print server IPV4 (only in this location)
1
1
2 3 45
2346
4
2. See Figure 2. Remove the two option card mounting screws that secure it to the top slot.
Figure 2 Remove the Option Card (ZT610 shown)
3. Slide the option card out of the printer.
4. Go to Install the ZebraNet 802.11ac Radio Print Server on page 6.
1Option card
2Mounting screws (2)
1
2
5
Remove the Cover Plate
1. See Figure 3. Remove the blank cover covering the top slot by removing the two mounting screws.
Figure 3 Remove the Blank Cover (ZT610 shown)
1Blank cover
2Mounting screws (2)
1
2
6
Install the ZebraNet 802.11ac Radio Print Server
1. See Figure 4. Align the print server card with the option card guide slots in the top slot of the printer.
Figure 4 Install the New ZebraNet Print Server Card (ZT610 shown)
2. Slowly slide the wireless option card into the printer until it stops.
3. Ensure that the option card connector is aligned with the main logic board connector, and then push in
the card on the top and bottom until the card is flush with the back of the printer.
4. Install the two mounting screws.
1Wireless print server card
2Option card guide slots (2)
3Wireless print server card connector
4Locating post
5Locating notch
1
2
2
34
5
7
5. See Figure 5. To install the external antenna, screw the antenna onto the RF connector extending out
of the option card.
Figure 5 Close-up of Antenna Installation
6. Which printer are you working on?.
1Option card mounting plate
2RF antenna
3RF connector
If you have a… Then…
ZT600 Series or
ZT510 Printers
Go to Apply the Compliance Label on ZT600 Series and ZT510 Printers on
page 8.
ZT400 Series
Printers
Go to Apply the Compliance Label on ZT400 Series Printers on page 9.
1
2
3
8
Apply the Compliance Label on ZT600 Series and ZT510 Printers
1. Open the media door and remove the media.
2. Locate the Product Label (1), already in place.
3. Select the proper compliance label for the printer.
4. Peel the backing off of the ZT600 series or ZT510 Compliance label (2), and then install the label
beside the product label (1).
5. Reinstall the media.
6. Reconnect the AC power cord and all data cables, and then turn on (l) the printer.
1
2
3
UID#.
ZT610
UID#.
ZT610
Z
Z
ZT
ZT
T6
ZT6
6
6
10
610
#
U
I
D
.
U
I
D
#
0
0
0
610
ZT
Z
Z
0
0
0
T610
ZT6
Z
Z
12
9
Apply the Compliance Label on ZT400 Series Printers
1. Open the media door and remove the media.
2. See Figure 6. Locate the Product Label, already in place.
Figure 6 Locate the Product Label
3. Select the proper compliance label for the printer.
4. Peel the backing off of the label, (ZT10/ZT420 Printers), and then install the label below the product
label as shown in Figure 6.
5. Reinstall the media.
6. Reconnect the AC power cord and all data cables, and then turn on (l) the printer.
1Product label
2Compliance label
ZT400 Series
22488-002
Contains FCC ID: I28-RFIDM6EMTT
IC ID: 3798B-RFIDM6EMTT
333 Corporate Woods Parkway
Vernon Hills, IL 60061
Zebra Technologies Corporation
“En el Perú, este equipo diseñado para la banda de 902-928MHz,
KDVLGRFRQ¿JXUDGRSDUDRSHUDUVyORODEDQGD0+]
Este equipamento
Agência National de Telecomunicaçoes
3059-13-8108
(01)07899029302782
IFETEL: RCPZEM614-0178
UID#.
ZT400
(
Este
(
(
(
(
A
Ag
ê
nciaNati
tionalde Teleco
comunic
nic
a
ç
oes
A
Ag
ê
ncia Nati
3059
tional de Tel
9138
eleco
81
comunic
108
nic
a
ç
oes
8
9
59
59
5
59
05
5
0
05
5
5
30
30
3
30
30
0
3
3
3
3
3
3
3
3
3
3
0
0
0
0
9
9
9
9
9
9
5
38
3
38
3
3-8
-8
8
913
3
-13
9
9-
-
-1
13
3
3
9
9
9
9
1
1
1
9
9
8
8
3-
-
-
-
-
81
81
8
81
1
8
8
8
8
8
8
8
08
8
08
0
08
8
10
10
1
0
10
08
1
1
1
0
0
0
0
0
8
8
8
8
8
8
8
8
8
8
8
8
8
8
8
8
8
(01)0
07
7899
90293
30
027
782
e
e
(0
ee
0
eq
)0
q
)0
q
01)
eq
1
0
q
07
0
0
qu
7899
8
7
8
99
ipa
90293
ii
90
9
ii
9
2
9
ii
9
0
9029
a
30
3
3
0
am
027
0
7
2
0
mento
782
8
2
7
8
2
7
es
Serie
S
2
22488-002
Este
e
eq
q
#.
#
0
D#
D#
T400
UID
ZT
U
Z
U
qu
ipa
a
am
mento
ZT4
00
1
2
10
Configure the Printer for Wi-Fi Operation
1. Connect the printer to your computer using a USB or serial connection.
2. Is the printer to be used in the United States, Canada, or Japan?
3. Do you need to pair a Bluetooth device?
If… Then…
Yes a. The country codes have been preset at the factory and cannot be changed.
b. Go to step 3.
No The country code must be set for your wireless board.
IMPORTANT: The list of country codes is specific to each printer and depends on the
printer model and its wireless radio configuration. The list is subject to change,
addition, or deletion with any firmware update, at any time, without notice.
a. To determine the country codes available on the printer, issue the following command
to return all commands related to WLAN settings.
! U1 getvar "wlan"
b. Locate the wlan.country.code command in the results and view the country codes
available for the printer.
c. Send the following command with the appropriate country code value. When this value has
been set, it cannot be changed.
! U1 setvar "wlan.country_code" "value"
d. Go to step 3.
If… Then…
No Go to Resume Printer Operation on page 15.
Yes Go to Bluetooth Pairing on page 11.
11
Bluetooth Pairing
Which type of printer do you have?
Manually Pairing ZT411 and ZT421 Printers
1. From the printer’s home screen, navigate to Connection > Bluetooth > Bluetooth.
2. Touch On to enable Bluetooth on the printer.
3. Navigate to Connection > Bluetooth > Bluetooth Discovery.
If you have a… Then…
ZT600 Series
ZT510
1. Turn on Bluetooth on your device.
2. Hold up the device to the NFC logo on left side of the printer, next to the
control panel.
3. Follow the prompts on the device and the printer to pair them.
ZT411 or ZT421 Go to Manually Pairing ZT411 and ZT421 Printers on page 11.
ZT410 or ZT420 Go to Manually Pairing ZT410 and ZT420 Printers on page 12.
12
4. Touch On to enable Bluetooth discoverable mode on the printer.
The printer is now discoverable to Bluetooth devices. Use the Bluetooth options on the device to pair it
with the printer. For other Bluetooth features available on your printer, go to zebra.com/zt411-info or
zebra.com/zt421-info.
Manually Pairing ZT410 and ZT420 Printers
1. From the printer’s display screen, press LEFT SELECT to select the Home icon.
The printer displays the Home Menu.
PRINTER READY
V75.20.13Z
HOME MENU
SETTINGS
13
2. Use the ARROW buttons to navigate to the BLUETOOTH menu.
The Bluetooth menu is selected.
3. Press OK.
The printer displays the Bluetooth MAC address.
HOME MENU
BLUETOOTH
14
4. Use the RIGHT ARROW button to scroll to DISCOVERY.
The printer displays DISCOVERY.
5. Use the UP ARROW button to change DISCOVERY to ON.
DISCOVERY is on.
The printer is now discoverable to Bluetooth devices. Use the Bluetooth options on the device to pair it
with the printer.
15
Resume Printer Operation
1. Reinstall media and ribbon (if used).
2. Close the media door.
3. If you disconnected the AC power cord and interface cables, reconnect them, and then turn on the
printer power.
4. If necessary, press Pause to resume printer operation.
The installation is complete.
/